UPC3220GR-E1

UPC3220GR RENESAS | Alldatasheet

Document overview

PDF pages: 36

Technical content

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.

All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipment; co mmunications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

DESCRIPTION

The µPC3220GR is a silicon monolithic IC designed for use as IF down-converter for digital CATV. This IC consists of AGC amplifier, mixer and video amplifier. The package is 16-pin SSOP (Shrink Small Outline Package) suitable for surface mount. This IC is manufactured using our 10 GHz fT NESAT II AL silicon bipolar process. This process uses silicon nitride passivation film. This material can protect chip surface from external pollution and prevent corrosion/migration. Thus, this IC has excellent performance, uniformly and reliability.

FEATURES

Low distortion IIP3 = +1.0 dBm TYP. Wide AGC dynamic range GCR total = 45.5 dB TYP. On chip video amplifier Supply voltage : 5 V Packaged in 16-pin SSOP suitable for high-density surface mounting APPLICATION Digital CATV receivers

ORDERING INFORMATION

Part Number Order Number Package Marking Supplying Form µPC3220GR-E1 µPC3220GR-E1-A 16-pin plastic SSOP (5.72 mm (225)) (Pb-Free) Note C3220 • Embossed tape 12 mm wide

Pin 1 indicates pull-out direction of tape
Qty 2.5 kpcs/reel Note With regards to terminal solder (the solder contai ns lead) plated products (conventionally plated), contact your nearby sales office. Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: µPC3220GR DATA SHEET Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. LOW DISTORTION DOWN-CONVERTER IC FOR DIGITAL CATV BIPOLAR ANALOG INTEGRATED CIRCUIT µPC3220GR Document No. PU10165EJ05V0DS (5th edition) Date Published January 2005 CP(K) Printed in Japan The mark shows major revised points.  NEC Compound Semiconductor Devices, Ltd. 2002, 2005

INTERNAL BLOCK DIAGRAM AND PIN CONFIGURATION (Top View) RF IN1 RF IN2 V AGC GND OSC IN1 OSC IN2 VCC1 VCC2 GND MIX OUT2 MIX OUT1 AMP IN1 AMP IN2 GND AMP OUT1 AMP OUT2 Video Amp. AGC Amp. Mixer OSC OUT Buffer Amp. Data Sheet PU10165EJ05V0DS 2 µPC3220GR

No. Symbol Pin Voltage (V, TYP.) Explanation Equivalent Circuit 1 RF IN1 1.46 2 RF IN2 1.46 Input pin of IF signal. 1-pin is same phase and 2-pin is opposite phase at balance input. In case of single input, 1-pin or 2-pin should be grounded through capacitor (example 10 nF). AGC Control 1 2 3 V AGC 0 to 3.5 Automatic gain control pin. This pins bias govern the AGC output level. Minimum gain at VAGC = 0 V Maximum gain at VAGC = 3.5 V AGC Control 4 GND 0.0 Ground pin. Must be connected to the system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible.  5 OSC IN1 2.6 6 OSC IN2 2.6 Input pin of Oscillator signal. 5-pin is same phase and 6-pin is opposite phase at balance input. In case of single input, 5-pin or 6-pin should be grounded through capacitor (ex. 10 nF). 5 6 7 V CC1 5.0 Power supply pin of IF down convertor block. Must be connected bypass capacitor to minimize ground impedance.  8 V CC2 5.0 Power supply pin of video amplifier. Must be connected bypass capacitor to minimize ground impedance.  Data Sheet PU10165EJ05V0DS 3 µPC3220GR

No. Symbol Pin Voltage (V, TYP.) Explanation Equivalent Circuit

9 AMP

2.5

10 AMP

2.5 Output pin of video amplifier. OUT1 and IN1 are same phase. OUT2 and IN2 are same phase. 11 GND 0.0 Ground pin. Must be connected to the system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible.  12 AMP IN2 1.45 13 AMP IN1 1.45 Signal input pin of video amplifier. This pin is high impedance. 12 13 14 GND 0.0 Ground pin. Must be connected to the system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible.  15 MIX OUT1 3.7 16 MIX OUT2 3.7 Output pin of mixer. This output pin features low-impedance because of its emitter-follower output port. Data Sheet PU10165EJ05V0DS 4 µPC3220GR

Parameter Symbol Conditions Ratings Unit Supply Voltage VCC T A = +25°C 6.0 V Power Dissipation PD T A = +85°C Note 433 mW Operating Ambient Temperature T A −40 to +85 °C Storage Temperature Tstg −55 to +150 °C Note Mounted on double-sided copper-clad 50 × 50 × 1.6 mm epoxy glass PWB RECOMMENDED OPERATING RENGE Parameter Symbol Conditions MIN. TYP. MAX. Unit Supply Voltage VCC 4.5 5.0 5.5 V Operating Ambient Temperature T A V CC = 4.5 to 5.5 V −40 +25 +85 °C Gain Control Voltage Range VAGC 0 − VCC V Data Sheet PU10165EJ05V0DS 5 µPC3220GR

ELECTRICAL CHARACTERISTICS (TA = +25°C, VCC = 5 V) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit DC Characteristics Circuit Current 1 (Total Block) ICC1 No input signal, V CC1 = VCC2 = 5 V Note 4 33.0 42.0 53.5 mA Circuit Current 2 (AGC Amplifier Block + Mixer Block) I CC2 No input signal, V CC1 = 5 V Note 4 15.0 20.0 25.5 mA Circuit Current 3 (Video Amplifier Block) I CC3 No input signal, V CC2 = 5 V Note 4 18.0 22.0 28.0 mA AGC Voltage High Level VAGC (H) @ Maximum gain Note 1 3.0 − VCC V AGC Voltage Low Level VAGC (L) @ Minimum gain Note 1 0 − 0.5 V RF Characteristics (AGC Amplifier Block + Mixer Block: f RF = 84 MHz, fLO = 134 MHz, PLO = −15 dBm, fIF = 50 MHz, ZS = 50 Ω, ZL = 1 kΩ) RF Input Frequency Range fRF f IF = 50 MHz constant Note 1 30 − 250 MHz IF Output Frequency Range fIF f RF = 84 MHz constant Note 1 0.1 − 150 MHz Maximum Conversion Gain CGMAX V AGC = 3.0 V, Pin = −50 dBm Note 1 30.5 33.0 35.5 dB Minimum Conversion Gain CGMIN V AGC = 0.5 V, Pin = −20 dBm Note 1 −18.0 −12.5 −3.5 dB AGC Dynamic Range GCRAGC V AGC = 0.5 to 3.0 V Note 1 36.0 45.5 − dB Noise Figure NF DSB, V AGC = 3.0 V (@ Maximum gain) Note 2 − 7.0 8.5 dB 3rd Order Intermodulaion Distortion IM 3 V out = 0.236 Vp-p × 2 tone, (single-ended output), P in −30 dBm/tone fRF1 = 84 MHz, fRF2 = 85 MHz Note 1 24.0 26.5 − dBc RF Characteristics (Video Amplifier Block: f = 50 MHz, ZS = 50 Ω, ZL = 1 kΩ) Differential Gain Gdiff P in = −55 dBm Note 3 48.0 50.5 53.5 dB Maximum Output Voltage 2 Voclip2 P in = −25 dBm Note 3 2.95 3.70 − Vp-p Notes 1. By measurement circuit 1 2. By measurement circuit 2 3. By measurement circuit 4 4. By measurement circuit 6 Data Sheet PU10165EJ05V0DS 6 µPC3220GR

STANDARD CHARACTERISTICS (TA = +25°C, VCC = 5 V, ZS = 50 Ω) Parameter Symbol Test Conditions Reference Value Unit AGC Amplifier Block + Mixer Block (fRF = 84 MHz, fLO = 134 MHz, PLO = −15 dBm, fIF = 50 MHz, ZS = 50 Ω, ZL = 1 kΩ) Input 3rd Order Distortion Intercept Point IIP3 V AGC = 0.5 V (@ Minimum gain) fRF1 = 84 MHz, fRF2 = 85 MHz Note 1 +1.0 dBm Maximum Output Voltage1 Voclip1 V AGC = 3.0 V, Pin = −20 dBm Note 1 0.65 V p-p RF IN Impedance ZRFin V AGC = 3.0 V, f = 84 MHz Note 2 440 − j1100 Ω OSC IN Impedance ZOSCin V AGC = 3.0 V, f = 134 MHz Note 2 280 − j810 Ω MIXER OUT Impedance ZMIXout V AGC = 3.0 V, f = 50 MHz Note 2 30.2 + j2.5 Ω Video Amplifier Block (f = 50 MHz, ZS = 50 Ω, ZL = 1 kΩ) Frequency Range fBW P in = −55 dBm, G (f = 10 MHz) −1 dB Note 3

60 MHz

Input Impedance ZAMPin f = 50 MHz Note 4 330 − j480 Ω Output Impedance ZAMPout f = 50 MHz Note 4 21.9 + j22.6 Ω 3rd Order Intermodulaion Distortion IM 3 V out = 0.7 Vp-p × 2 tone, fin1 = 49 MHz, fin2 = 50 MHz Note 3 55.0 dBc Total Block (fRF = 84 MHz, fLO = 134 MHz, PLO = −15 dBm, fIF = 50 MHz, ZS = 50 Ω, ZL = 1 kΩ) Maximum Conversion Gain CGMAX V AGC = 3.0 V, Pin = −70 dBm Note 5 67.5 dB Minimum Conversion Gain CGMIN V AGC = 0.5 V, Pin = −40 dBm Note 5 22.0 dB Total Dynamic Range GCR V AGC = 0.5 to 3.0 V Note 5 45.5 dB Noise Figure NF DSB, V AGC = 3.0 V (@ Maximum gain) Note 6 7.0 dB Maximum Output Voltage Voclip V AGC = 3.0 V (@ Minimum gain) Note 5

3.7 V p-p

Input 3rd Order Distortion Intercept Point IIP 3total V AGC = 0.5 V (@ Minimum gain) fRF1 = 84 MHz, fRF2 = 85 MHz Note 5 +1.0 dBm 3rd Order Intermodulaion Distortion IM 3total V out = 0.7 Vp-p × 2 tone, Pin −40 dBm/tone fRF1 = 84 MHz, fRF2 = 85 MHz Note 5 51.0 dBc Notes 1. By measurement circuit 1 2. By measurement circuit 3 3. By measurement circuit 4 4. By measurement circuit 5 5. By measurement circuit 6 6. By measurement circuit 7 Data Sheet PU10165EJ05V0DS 7 µPC3220GR

50 Ω 51 Ω 1 kΩ50 Ω 50 Ω RF1 LO VAGC VCC1 RF2 50 Ω 1 Fµ 1 Fµ 1 kΩ1 Fµ 1 Fµ 0.1 Fµ

0.1 F//20 pFµ

0.1 Fµ 0.1 Fµ 0.1 Fµ 0.1 Fµ Video Amp. AGC Amp. Mixer OSC OUT Buffer Amp. IF Note Balun Transformer : TOKO 617DB-1010 B4F (Double balanced type) MEASUREMENT CIRCUIT 2 Note 51 Ω 1 kΩ 50 Ω LO RF VAGC VCC1 1 Fµ 1 Fµ 1 kΩ1 Fµ 1 Fµ 0.1 Fµ 0.1 Fµ 0.1 Fµ 50 ΩNoise Source 0.1 Fµ Noise Figure Meter Video Amp. AGC Amp. Mixer OSC OUT Buffer Amp. 0.1 Fµ IF Note Balun Transformer : TOKO 617DB-1010 B4F (Double balanced type) Data Sheet PU10165EJ05V0DS 8 µPC3220GR

51 Ω LO RF IF VAGC VCC1 1 Fµ 1 Fµ 1 Fµ 1 Fµ 0.1 Fµ 0.1 Fµ 0.1 Fµ 50 Ω50 Ω LO Port Input Impedance IF Port Input Impedance RF Port Input Impedance Network Analyzer 0.1 Fµ 0.1 Fµ Video Amp. AGC Amp. Mixer OSC OUT Buffer Amp. MEASUREMENT CIRCUIT 4 VCC2 1 Fµ 1 Fµ 1 Fµ 1 Fµ

1 Fµ 50 Ω

51 Ω 1 kΩ 1 kΩ 51 Ω 50 Ω 51 Ω 51 Ω Spectrum Analyzer Vin Vout VOUT 0.1 Fµ Video Amp. AGC Amp. Mixer OSC OUT Buffer Amp. Remarks 1. Voltage Gain (Single Ended) = 20 log (VOUT/Vin) (dB) 2. Differential Gain (Differential-out) = 20 log (2 × VOUT/Vin) (dB) 3. VOUT = Vout (Measured Value) × (1 050/50) Data Sheet PU10165EJ05V0DS 9 µPC3220GR

VCC2 1 Fµ 1 Fµ 1 Fµ 1 Fµ 1 Fµ 50 Ω 50 Ω 51 Ω 51 Ω0.1 Fµ Video Amp. AGC Amp. Mixer OSC OUT Buffer Amp. Output Impedance Input Impedance Network Analyzer MEASUREMENT CIRCUIT 6 Note Spectrum Analyzer 50 Ω 51 Ω 1 kΩ 1 kΩ 1 kΩ 50 Ω 50 Ω RF LO VAGC VCC1 1 Fµ 1 Fµ 1 Fµ 1 Fµ 1 kΩ1 Fµ1 Fµ 0.1 Fµ VCC2 1 Fµ 0.1 Fµ 0.1 Fµ 0.1 Fµ 0.1 Fµ Loss 10 dB @50 MHz0.1 Fµ Video Amp. AGC Amp. Mixer OSC OUT Buffer Amp. Note Balun Transformer : TOKO 617DB-1010 B4F (Double balanced type) Data Sheet PU10165EJ05V0DS 10 µPC3220GR

51 Ω 1 kΩ 1 kΩ 1 kΩ 50 Ω LO VAGC VCC1 1 Fµ 1 Fµ 1 Fµ 1 Fµ 1 kΩ1 Fµ1 Fµ 0.1 Fµ VCC2 1 Fµ 0.1 Fµ 0.1 Fµ 0.1 Fµ RF 0.1 Fµ 50 ΩNoise Figure MeterNoise Source 0.1 Fµ Video Amp. AGC Amp. Mixer OSC OUT Buffer Amp. Note Balun Transformer : TOKO 617DB-1010 B4F (Double balanced type) The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Data Sheet PU10165EJ05V0DS 11 µPC3220GR

ILLUSTRATION OF THE MEASUREMENT CIRCUIT1, 2 ASSEMBLED ON EVALUATION BOARD PC3220GRµ Note 1 kΩ 1 kΩ 51 Ω 1 Fµ 0.1 Fµ 0.1 Fµ 20 pF 0.1 Fµ 1 Fµ 0.1 Fµ 1 Fµ 0.1 Fµ VAGC LOinRF1, RF2in IFout VCC1 (AGC + MIX) Note Balun Transformer Remarks 1. Back side: GND pattern 2. Solder plated on pattern 3. : Through hole 4. : Represents cutout Data Sheet PU10165EJ05V0DS 12 µPC3220GR

ILLUSTRATION OF THE MEASUREMENT CIRCUIT3 ASSEMBLED ON EVALUATION BOARD PC3220GRµ 51 Ω 1 Fµ 0.1 Fµ 0.1 Fµ 20 pF 0.1 Fµ 1 Fµ 0.1 Fµ 1 Fµ 0.1 Fµ VAGC LOinRFin IFout VCC1 (AGC + MIX) 1 Fµ Remarks 1. Back side: GND pattern 2. Solder plated on pattern 3. : Through hole 4. : Represents cutout 5. : Represents short-circuit strip Data Sheet PU10165EJ05V0DS 13 µPC3220GR

ILLUSTRATION OF THE MEASUREMENT CIRCUIT4 ASSEMBLED ON EVALUATION BOARD PC3220GRµ 1 kΩ 1 Fµ 1 Fµ 1 kΩ 1 Fµ 1 Fµ 51 Ω 0.1 Fµ 1 Fµ VCC2 (Video) VoutVin 51 Ω Remarks 1. Back side: GND pattern 2. Solder plated on pattern 3. : Through hole 4. : Represents short-circuit strip Data Sheet PU10165EJ05V0DS 14 µPC3220GR

ILLUSTRATION OF THE MEASUREMENT CIRCUIT5 ASSEMBLED ON EVALUATION BOARD PC3220GRµ 1 Fµ

1 Fµ1 Fµ

1 Fµ 0.1 Fµ 1 Fµ VCC2 (Video) Input Impedance Output Impedance 51 Ω 51 Ω Remarks 1. Back side: GND pattern 2. Solder plated on pattern 3. : Through hole 4. : Represents short-circuit strip Data Sheet PU10165EJ05V0DS 15 µPC3220GR

ILLUSTRATION OF THE MEASUREMENT CIRCUIT6, 7 ASSEMBLED ON EVALUATION BOARD PC3220GRµ Note 1 kΩ 1 Fµ 1 Fµ 1 kΩ 1 Fµ 1 Fµ 1 kΩ 0.1 Fµ 0.1 Fµ 20 pF 0.1 Fµ 1 Fµ 0.1 Fµ 1 Fµ 0.1 Fµ 1 Fµ VAGC VCC1 (VGC + MIX) VCC2 (Video) Vout LOinRFin 51 Ω Note Balun Transformer Remarks 1. Back side: GND pattern 2. Solder plated on pattern 3. : Through hole 4. : Represents cutout 5. : Represents short-circuit strip Data Sheet PU10165EJ05V0DS 16 µPC3220GR

TYPICAL CHARACTERISTICS (TA = +25°C , unless otherwise specified) CIRCUIT CURRENT1 (TOTAL BLOCK) vs. SUPPLY VOLTAGE Circuit Current1 (Total Block) ICC1 (mA) Supply Voltage V CC1, 2 (V) 0123456 VAGC = 0 V No Singnal Measurement Cuicuit6 TA = –40°C TA = +25°C TA = +85°C CIRCUIT CURRENT2 (AGC AMPLIFIER + MIXER BLOCK) vs. SUPPLY VOLTAGE Circuit Current2 (AGC Amplifier + Mixer Block) ICC2 (mA) Supply Voltage V CC1 (V) 0123456 TA = –40°CTA = +85°C TA = +25°C CIRCUIT CURRENT3 (VIDEO AMPLIFIER BLOCK) vs. SUPPLY VOLTAGE Circuit Current3 (Video Amplifier Block) ICC3 (mA)30 Supply Voltage V CC2 (V) 0123456 TA = –40°C TA = +85°C TA = +25°C VCC2 = VAGC = 0 V No Singnal Measurement Cuicuit6 VCC1 = VAGC = 0 V No Singnal Measurement Cuicuit6 Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 17 µPC3220GR

−AGC Amplifier Block + Mixer Block− VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE Voltage Gain (dB) –10 –15 –20 RF Input Frequency Range f RF (MHz) 0 50 100 150 200 250 TA = –40°C TA = +85°C TA = +25°C VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE Voltage Gain (dB) –10 –15 RF Input Frequency Range f RF (MHz) 0 50 100 150 200 250 VCC1 = 5.5 V 5.0 V 4.5 V VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE Voltage Gain (dB) –10 –15 RF Input Frequency Range f RF (MHz) 0 50 100 150 200 250 VCC1 = 5.5 V 5.0 V 4.5 V VAGC = 1.5 V Pin = –50 dBm fLO = 60 to 290 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit1 VAGC = 3.0 V Pin = –50 dBm fLO = 60 to 290 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit1 VAGC = 1.5 V VCC = 5.0 V Pin = –50 dBm fLO = 60 to 290 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit1 VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE Voltage Gain (dB) –10 –15 RF Input Frequency Range f RF (MHz) 0 50 100 150 200 250 VAGC = 0.5 V Pin = –20 dBm fLO = 60 to 290 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit1 VCC1 = 4.5 V 5.0 V 5.5 V VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE Voltage Gain (dB) –10 –15 –20 RF Input Frequency Range f RF (MHz) 0 50 100 150 200 250 TA = –40°CTA = +85°C TA = +25°C VAGC = 3.0 V VCC = 5.0 V Pin = –50 dBm fLO = 60 to 290 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit1 VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE Voltage Gain (dB) –10 –15 –20 RF Input Frequency Range f RF (MHz) 0 50 100 150 200 250 TA = –40°C TA = +85°C TA = +25°C VAGC = 0.5 V VCC = 5.0 V Pin = –20 dBm fLO = 60 to 290 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit1 Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 18 µPC3220GR

VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE Voltage Gain (dB) –10 –15 –20 IF Output Frequency Range f IF (MHz) 02 0 6 0 80 140 160 VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE Voltage Gain (dB) –10 –15 –20 IF Output Frequency Range f IF (MHz) 02 0 4 0 100 140 160 TA = +25°C VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE Voltage Gain (dB) –10 –15 –20 IF Output Frequency Range f IF (MHz) 02 0 6 0 120 140 160 12060 80 TA = –40°C 1008040 TA = –40°CTA = +25°C TA = +85°C TA = +85°C 40 100 120 TA = +85°C TA = +25°C TA = –40°C VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE Voltage Gain (dB) –10 –15 IF Output Frequency Range f IF (MHz) 02 0 6 0 100 140 16040 80 120 VCC1 = 5.5 V 5.0 V 4.5 V VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE Voltage Gain (dB) –10 –15 IF Output Frequency Range f IF (MHz) 02 0 6 0 100 140 16040 80 120 VCC1 = 4.5 V 5.0 V 5.5 V VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE Voltage Gain (dB) –10 –15 IF Output Frequency Range f IF (MHz) 02 0 6 0 100 140 16040 80 120 VCC1 = 4.5 V 5.0 V 5.5 V VAGC = 0.5 V Pin = –20 dBm fLO = 94 to 234 MHz PLO = –15 dBm fRF = 84 MHz Measurement Cuicuit1 VAGC = 1.5 V Pin = –50 dBm fLO = 94 to 234 MHz PLO = –15 dBm fRF = 84 MHz Measurement Cuicuit1 VAGC = 3.0 V Pin = –50 dBm fLO = 94 to 234 MHz PLO = –15 dBm fRF = 84 MHz Measurement Cuicuit1 VAGC = 0.5 V VCC1 = 5.0 V Pin = –20 dBm fLO = 94 to 234 MHz PLO = –15 dBm fRF = 84 MHz Measurement Cuicuit1 VAGC = 1.5 V VCC1 = 5.0 V Pin = –50 dBm fLO = 94 to 234 MHz PLO = –15 dBm fRF = 84 MHz Measurement Cuicuit1 VAGC = 3.0 V VCC1 = 5.0 V Pin = –50 dBm fLO = 94 to 234 MHz PLO = –15 dBm fRF = 84 MHz Measurement Cuicuit1 Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 19 µPC3220GR

VOLTAGE GAIN vs. GAIN CONTROL VOLTAGE RANGE Voltage Gain (dB) –10 –15 –20 Gain Control Voltage Range V AGC (V) 0 0.5 1.5 3.0 3.5 fRF = 84 MHz Pin = –50 dBm fLO = 134 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit1 1.0 2.0 2.5 VCC1 = 4.5 V 5.0 V 5.5 V VOLTAGE GAIN vs. GAIN CONTROL VOLTAGE RANGE Voltage Gain (dB) –10 –15 –20 Gain Control Voltage Range V AGC (V) TA = –40°C +25°C +85°C NOISE FIGURE vs. GAIN CONTROL VOLTAGE RANGE Noise Figure NF (dB) Gain Control Voltage Range VAGC (V) 1.0 1.5 3.0 3.5 2.0 2.5 VCC1 = 5.5 V 5.0 V 4.5 V fLO = 134 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit2 NOISE FIGURE vs. GAIN CONTROL VOLTAGE RANGE Noise Figure NF (dB) Gain Control Voltage Range VAGC (V) 1.0 1.5 3.0 3.5 2.0 2.5 TA = +85°C +25°C –40°C VCC1 = 5.0 V fRF = 84 MHz Pin = –50 dBm fLO = 134 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit1 VCC1 = 5.0 V fLO = 134 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit2 Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 20 µPC3220GR

OUTPUT POWER vs. INPUT POWER Output Power Pout (50 Ω/1 050 Ω) (dBm) –15 –20 –25 –30 –35 –40 –45 –50 –55 Input Power P in (dBm) VCC1 = 5.5 V 5.0 V 4.5 V

2 TONE OUTPUT POWER

vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –20 –30 –40 –50 –60 –70 –80 –90 –100–60 –50 –20 –40 –30 VAGC = 3.0 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –35 OUTPUT POWER vs. INPUT POWER Output Power Pout (50 Ω/1 050 Ω) (dBm) –15 –20 –25 –30 –35 –40 –45 –50 –55 Input Power P in (dBm) TA = +25°C –35 –40°C +85°CVAGC = 3.0 V fRF = 84 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit1 VCC1 = 4.5 V 5.0 V 5.5 V –20 –30 –40 –50 –60 –70 –80 –90 –100–60 –50 –20 –40 –30 TA = –40°C +25°C +85°C vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –20 –30 –40 –50 –60 –70 –80 –90 –100–50 –40 –10 –30 –20 VAGC = 2.1 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 VCC1 = 4.5 V 5.0 V 5.5 V vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –20 –30 –40 –50 –60 –70 –80 –90 –100–50 –40 –10 –30 –20 VCC1 = 5.0 V VAGC = 3.0 V fRF = 84 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit1 VCC1 = 5.0 V VAGC = 3.0 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 TA = –40°C +25°C +85°C VCC1 = 5.0 V VAGC = 2.1 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 21 µPC3220GR

vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –20 –30 –40 –50 –60 –70 –80 –90 –100–30 –20 10 –10 0 VAGC = 0.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) VCC1 = 4.5 V 5.0 V 5.5 V –20 –30 –40 –50 –60 –70 –80 –90 –100–30 –20 10 –10 0 vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –20 –30 –40 –50 –60 –70 –80 –90 –100–30 –20 10 –10 0 VAGC = 1.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 VCC1 = 4.5 V 5.0 V 5.5 V vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –20 –30 –40 –50 –60 –70 –80 –90 –100–30 –20 10 –10 0 TA = –40°C +25°C +85°C VCC1 = 5.0 V VAGC = 1.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 TA = –40°C +25°C +85°C VCC1 = 5.0 V VAGC = 0.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 22 µPC3220GR

−Video Amplifier Block− VOLTAGE GAIN (SINGLE-ENDED) vs. INPUT FREQUENCY Voltage Gain (Single-ended) (dB) Input Frequency fin (MHz) 10 100 VCC2 = 4.5 V 5.0 V 5.5 V VOLTAGE GAIN (SINGLE-ENDED) vs. INPUT FREQUENCY Voltage Gain (Single-ended) (dB) Input Frequency fin (MHz) 10 100 TA = –40°C +25°C +85°C VCC2 = 5 V Pin = –55 dBm Measurement Cuicuit4 OUTPUT POWER vs. INPUT POWER Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –10 –15 –20 –25 –30 –35 –40–50 –45 –15 –25 –20 fIF = 50 MHz Measurement Cuicuit4 VCC2 = 4.5 V 5.0 V 5.5 V –40 –35 –30 OUTPUT POWER vs. INPUT POWER Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –10 –15 –20 –25 –30 –35 –40–50 –45 –15 –25 –20 VCC2 = 5 V fIF = 50 MHz Measurement Cuicuit4 TA = –40°C +25°C +85°C –40 –35 –30 vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –10 –20 –30 –40 –50 –60 –70 –80 –90–60 –20 –30 fIF1 = 50 MHz fIF2 = 49 MHz Measurement Cuicuit4 VCC2 = 4.5 V 5.0 V 5.5 V –50 –40 vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –10 –20 –30 –40 –50 –60 –70 –80 –90–60 –20 –30 VCC2 = 5 V fIF1 = 50 MHz fIF2 = 49 MHz Measurement Cuicuit4 TA = –40°C +25°C +85°C –50 –40 Pin = –55 dBm Measurement Cuicuit4 Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 23 µPC3220GR

−Total Block− VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE Voltage Gain (dB) RF Input Frequency Range fRF (MHz) 00 250 VCC1, 2 = 4.5 V 5.0 V 5.5 V 100 150 200 VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE Voltage Gain (dB) RF Input Frequency Range fRF (MHz) 0 250 TA = –40°C +25°C +85°C 100 150 200 VCC1, 2 = 5 V fLO = 60 to 290 MHz VAGC = 3.0 V (Pin = –70 dBm) VAGC = 1.5 V (Pin = –40 dBm) VAGC = 0.5 V (Pin = –40 dBm) VAGC = 3.0 V (Pin = –70 dBm) VAGC = 1.5 V (Pin = –40 dBm) VAGC = 0.5 V (Pin = –40 dBm) VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE Voltage Gain (dB) IF Output Frequency Range fIF (MHz) 0 160 VCC1, 2 = 4.5 V5.0 V5.5 V 100 120 140 VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE Voltage Gain (dB) IF Output Frequency Range fIF (MHz) 00 160 TA = –40°C +25°C +85°C 60 100 140 VCC1, 2 = 5 V fLO = 94 to 234 MHz PLO = –15 dBm fRF = 84 MHz VAGC = 3.0 V (Pin = –70 dBm) VAGC = 1.5 V (Pin = –40 dBm) VAGC = 0.5 V (Pin = –40 dBm) VAGC = 3.0 V (Pin = –70 dBm) VAGC = 1.5 V (Pin = –40 dBm) VAGC = 0.5 V (Pin = –40 dBm) 40 60 80 VOLTAGE GAIN vs. GAIN CONTROL VOLTAGE RANGE Voltage Gain (dB) Gain Control Voltage Range V AGC (V) 0 0.5 1.5 3.0 3.5 fRF = 84 MHz Pin = –70 dBm fLO = 134 MHz PLO = –15 dBm Measurement Cuicuit6 1.0 2.0 2.5 VCC1, 2 = 4.5 V 5.0 V 5.5 V Voltage Gain (dB) Gain Control Voltage Range V AGC (V) 0 0.5 1.5 3.0 3.5 VCC1, 2 = 5 V fRF = 84 MHz Pin = –70 dBm fLO = 134 MHz PLO = –15 dBm Measurement Cuicuit6 1.0 2.0 2.5 TA = –40°C +25°C +85°C 40 80 120 fLO = 60 to 290 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit6 PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit6 fLO = 94 to 234 MHz PLO = –15 dBm fRF = 84 MHz Measurement Cuicuit6 Measurement Cuicuit6 VOLTAGE GAIN vs. GAIN CONTROL VOLTAGE RANGE Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 24 µPC3220GR

NOISE FIGURE vs. GAIN CONTROL VOLTAGE RANGE Noise Figure NF (dB) Gain Control Voltage Range V AGC (V) 1.0 1.5 3.0 3.5 fIF = 50 MHz fLO = 134 MHz PLO = –15 dBm Measurement Cuicuit7 2.0 2.5 VCC1, 2 = 4.5 V 5.0 V 5.5 V NOISE FIGURE vs. GAIN CONTROL VOLTAGE RANGE Noise Figure NF (dB) Gain Control Voltage Range V AGC (V) 1.0 1.5 3.0 3.5 VCC1, 2 = 5 V fIF = 50 MHz fLO = 134 MHz PLO = –15 dBm Measurement Cuicuit7 2.0 2.5 TA = –40°C +25°C +85°C OUTPUT POWER vs. INPUT POWER Output Power Pout (50 Ω/1 050 Ω) (dBm) –10 –15 –20 –25 –30 –35 –40 Input Power P in (dBm) VCC1, 2 = 5.5 V 5.0 V 4.5 V –55 VAGC = 3.0 V fRF = 84 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit6 OUTPUT POWER vs. INPUT POWER Output Power Pout (50 Ω/1 050 Ω) (dBm) –10 –15 –20 –25 –30 –35 –40 Input Power P in (dBm) TA = +25°C –55 –40°C +85°C vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –10 –20 –30 –40 –50 –60 –70 –80–80 –70 –40 –60 –50 VAGC = 3.0 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit6 VCC1, 2 = 4.5 V 5.0 V 5.5 V vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –10 –20 –30 –40 –50 –60 –70 –80–80 –70 –40 –60 –50 VCC1, 2 = 5.0 V VAGC = 3.0 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit6 TA = –40°C +25°C +85°C VCC1, 2 = 5.0 V VAGC = 3.0 V fRF = 84 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50 MHz Measurement Cuicuit6 Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 25 µPC3220GR

vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –10 –20 –30 –40 –50 –60 –70 –80–50 –40 –10 –30 –20 VAGC = 1.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit6 VCC1, 2 = 4.5 V 5.0 V 5.5 V vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –10 –20 –30 –40 –50 –60 –70 –80–50 –40 –10 –30 –20 VCC1, 2 = 5 V VAGC = 1.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit6 TA = –40°C +25°C +85°C vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –10 –20 –30 –40 –50 –60 –70 –80–35 –25 5 –15 –5 VAGC = 0.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit6 VCC1, 2 = 4.5 V 5.0 V 5.5 V vs. INPUT POWER 2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –10 –20 –30 –40 –50 –60 –70 –80–35 –25 5 –15 –5 VCC1, 2 = 5.0 V VAGC = 0.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz Measurement Cuicuit6 TA = –40°C +25°C +85°C Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 26 µPC3220GR

IM3, 2 TONE OUTPUT POWER, GAIN CONTROL VOLTAGE vs. INPUT POWER2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –20 –30 –40 –50 –60 –70 –80 –90 –80 –60 0 –40 –20 Conditions fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz @Vout = 0.7 Vp-p/tone Measurement Cuicuit6 VCC1, 2 = 4.5 V 5.0 V 5.5 V Gain Control Voltage Range VAGC (V) –70 –50 –30 –10 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 IM3, 2 TONE OUTPUT POWER, GAIN CONTROL VOLTAGE vs. INPUT POWER2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm) Input Power Pin (dBm) –20 –30 –40 –50 –60 –70 –80 –90 –80 –60 0 –40 –20 TA = –40°C +25°C +85°C –70 –50 –30 –10 Gain Control Voltage Range VAGC (V) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 VAGC Pout 3rd Order Intermoduration Distortion IM3 (dBc)3rd Order Intermoduration Distortion IM3 (dBc) IM3 VAGC Pout IM3 Conditions fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = –15 dBm fIF = 50, 49 MHz @Vout = 0.7 Vp-p/tone Measurement Cuicuit6 Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 27 µPC3220GR

−AGC Amplifier Block + Mixer Block− (VCC1 = 5.0 V, VAGC = 3.0 V, by measurement circuit 3) MIXER RF Input Impedance 1 : 30 MHz 1.830 kΩ –1.603 kΩ 3.309 pF 2 : 84 MHz 443.0 Ω –1.096 kΩ 1.730 pF 3 : 150 MHz 207.4 Ω –728.7 Ω 1.456 pF 4 : 250 MHz 109.7 Ω –454.1 Ω 1.402 pF MIXER IF Output Impedance 1 : 10 MHz 29.48 Ω 634.6 mΩ 10.07 nH 2 : 36 MHz 29.98 Ω 1.908 Ω 8.431 nH 3 : 50 MHz 30.17 Ω 2.476 Ω 7.884 nH 4 : 100 MHz 30.79 Ω 4.171 Ω 6.638 nH 1 4 Data Sheet PU10165EJ05V0DS 28 µPC3220GR

Data Sheet PU10165EJ05V0DS 29 µPC3220GR 1 : 30 MHz 1.820 kΩ –1.823 kΩ 2.911 pF 2 : 100 MHz 415.5 Ω –1.010 Ω 1.575 pF 3 : 134 MHz 284.6 Ω –813.1 Ω 1.461 pF 4 : 250 MHz 133.4 Ω –487.0 Ω 1.307 pF

−Video Amplifier Block− (VCC2 = 5.0 V, by measurement circuit 5) Video Amplifier Input Impedance 1 : 10 MHz 1.187 kΩ –1.177 kΩ 13.54 pF 2 : 36 MHz 389.8 Ω –588.3 Ω 7.516 pF 3 : 50 MHz 333.4 Ω –481.1 Ω 6.617 pF 4 : 100 MHz 245.5 Ω –369.7 Ω 4.304 pF Video Amplifier Output Impedance 1 4 1 : 10 MHz 10.04 Ω 5.225 Ω 83.16 nH 2 : 36 MHz 15.86 Ω 17.70 Ω 78.25 nH 3 : 50 MHz 21.54 Ω 22.61 Ω 71.96 nH 4 : 100 MHz 45.48 Ω 23.89 Ω 38.02 nH Data Sheet PU10165EJ05V0DS 30 µPC3220GR

16-PIN PLASTIC SSOP (5.72 mm (225)) (UNIT: mm) detail of lead end 5˚± 5˚ 16 9 5.2±0.3 6.4±0.2 4.4±0.2 0.5±0.2 1.0±0.2 0.17+0.08 –0.07 0.10 S 1.8 MAX. 1.5±0.1 0.475 MAX. S 0.22+0.10 –0.05 0.125±0.075 0.10 M 0.65 Data Sheet PU10165EJ05V0DS 31 µPC3220GR

(1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as widely as possible to mi nimize ground impedance (to pr event undesired oscillation). All the ground pins must be connected together with wide ground pattern to decrease impedance difference. (3) The bypass capacitor should be attached to V CC line. RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Soldering Conditions Condition Symbol Infrared Reflow Peak temperature (package surface temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Time at temperature of 220°C or higher : 60 seconds or less Preheating time at 120 to 180°C : 120±30 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below IR260 Wave Soldering Peak temperature (molten solder temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120 °C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below WS260 Partial Heating Peak temperature (pin temperature) : 350°C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below HS350 Caution Do not use different soldering met hods together (except for partial heating). Data Sheet PU10165EJ05V0DS 32 µPC3220GR

When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license. M8E 00. 4 - 0110 The information in this document is current as of January, 2005. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). Data Sheet PU10165EJ05V0DS 33 µPC3220GR

NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) Hong Kong Head Office Taipei Branch Office Korea Branch Office TEL: +852-3107-7303 TEL: +886-2-8712-0478 FAX: +852-3107-7309 FAX: +886-2-2545-3859 NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0406 NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 For further information, please contact µPC3220GR

Summary

BIPOLAR ANALOG INTEGRATED CIRCUIT 2005

Description