UPC3202

UPC3202GR NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 20

Technical content

BIPOLAR ANALOG INTEGRATED CIRCUIT µµµµPC3202GR FREQUENCY DOWN CONVERTER FOR VHF to UHF BAND TV/VCR TUNER Document No. P12151EJ3V0DS00 (3rd edition) Date Published October 1999 N CP(K) Printed in Japan DATA SHEET The mark shows major revised points. © 1996, 1999

DESCRIPTION

The µPC3202GR is Silicon monolithic IC designed for TV/VCR tuner applications. This IC consists of a double balanced mixer (DBM), local oscillator, preamplifier for precscaler operation, IF amplifier, regulator, and so on. This one-chip IC covers a wide frequency band from VHF to UHF bands. This IC is packaged in 20-pin SSOP (Shrink Small Outline Package) suitable for surface mounting.

FEATURES

• VHF to UHF band operation.
• Low power dissipation Vcc = 5 V, Icc = 41 mA TYP.
• Packaged in 20-pin SSOP suitable for surface mounting

ORDERING INFORMATION

Part Number Package Package Style µPC3202GR-E1 20-pin plastic SSOP (225 mil) Embossed tape 12 mm wide. 2.5 k/REEL Pin 1 indicates pull-out direction of tape For evaluation sample order, please contact your local NEC office. (Part number for sample order: µPC3202GR) Caution electro-static sensitive device The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.

Data Sheet P12151EJ3V0DS002 µµµµPC3202GR INTERNAL BLOCK DIAGRAM AND PIN CONFIGURATION (Top View) 12 0 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 UOSC C1 UOSC B2 UOSC B1 UOSC C2, UB GND OSC OUT VOSC B1 VOSC B2 VOSC C1 V CC URF IN URF IN (bypass) GND VRF IN VRF IN (bypass) MIX OUT MIX OUT IF IN IF IN IF OUTREG U OSC V OSC

Data Sheet P12151EJ3V0DS00 3 µµµµPC3202GR PIN EXPLANATION Pin No. Symbol Pin Voltage TYP. above: VHF mode below: UHF mode Function and Explanation Equivalent Circuit 5.001U O S C collector (Tr.1) 3.60 Collector pin of UHF oscillator. Assemble LC resonator with 2 pin through 1 pF capacitor to oscillate with active feedback loop. 0.02U O S C base (Tr.2) 1.90 Base pin of UHF oscillator with balance amplifier. Connected to LC resonator through 360 pF feedback capacitor. 0.03U O S C base (Tr.1) 1.90 Base pin of UHF oscillator with balance amplifier. Connected to LC resonator through 360 pF feedback capacitor. 0.04U O S C collector (Tr.2) and UB 5.00 Collector pin of UHF oscillator with balance amplifier. Grounded through 6 pF capacitor. Double balanced oscillator with transistor 1 and transistor 2. And this pin is switch for VHF or UHF. VHF operation = GND UHF operation = 5.0 V REG 4 1 3 0.05G N D 0.0 GND pin for VHF and UHF oscillator 2.706O S C output 2.35 VHF and UHF oscillator signal output pin. In case of F/S tuner application, connected PLL symthesizer IC’s input pin. from OSC6 1.957V O S C base (Tr.1) 0.0 Base pin of VHF oscillator. Grounded through 10 pF capacitor. 1.958V O S C base (Tr.2) 0.0 Base pin of VHF oscillator. Assemble LC resonator with 10 pin to oscillate with active feedback loop. 3.609V O S C collector (Tr.2) 5.00 Collector pin of VHF oscillator. Connected to LC resonator through 3 pF feedback capacitor. 798

5.0010 Vcc

5.00 Power supply pin.

Data Sheet P12151EJ3V0DS004 µµµµPC3202GR Pin No. Symbol Pin Voltage TYP. above: VHF mode below: UHF mode Function and Explanation Equivalent Circuit 2.5511 IF output 2.55 IF signal output pin for VHF and UHF operation.

2.0012 IF IN

2.00 IF signal input pins. Connected to Mixer output pins through 1000 pF capacitors.

2.0013 IF IN

2.00

5.0014 MIX OUT

5.00

5.0015 MIX OUT

5.00 VHF and UHF MIX output pins. These pins should be equipped with tank circuit to adjust intermediate frequency

2.8016 VRF IN

(bypass) 2.85 Bypass pin for VHF MIX input. Grounded through 1000 pF capacitor.

2.8017 VRF IN

2.85 VHF RF signal input pin. from VHF OSC 16151417

0.018 GND

0.0 GND pin of MIX, IF amplifier and regulator.

2.8519 URF IN

(bypass) 2.80 Bypass pin for UHF MIX input. Grounded through 1000 pF capacitor.

2.8520 URF IN

2.80 UHF RF signal input pin. from UHF OSC 16151419

Data Sheet P12151EJ3V0DS00 5 µµµµPC3202GR ABSOLUTE MAXIMUM RATINGS (T A = 25°C unless otherwise specified) Parameter Symbol Condition Ratings Unit Supply voltage 1 V CC 6.0 V Supply voltage 2 UB 6.0 V Power dissipation P D TA = 80°C 466 mW Operation temperature range T A –20 to +80 °C Storage temperature range T stg –55 to +150 °C *1 Mounted on 50 × 50 × 1.6 mm double cupper epoxy glass board. RECOMMENDED OPERATING RANGE Parameter Symbol MIN. TYP. MAX. Unit Supply voltage 1 V CC 4.5 5.0 5.5 V Supply voltage 2 UB 4.5 5.0 5.5 V Operation temperature range T A –20 +25 +80 °C ELECTRICAL CHARACTERISTICS (T A = 25°C, VCC = 5 V, fosc = fRF + 45 MHz, fIF = 45 MHz, POSC = –10 dBm) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Circuit Current 1 I CC 1 @VHF, no input signal *1 34.0 41.0 48.0 mA Circuit Current 2 Icc2 @UHF, no input signal *1 34.0 41.0 48.0 mA Conversion Gain 1 CG1 fRF = 55 MHz, PRF = –30 dBm *2 22.0 25.0 28.0 dB Conversion Gain 2 CG2 fRF = 200 MHz, PRF = –30 dBm *2 22.0 25.0 28.0 dB Conversion Gain 3 CG3 fRF = 470 MHz, PRF = –30 dBm *2 22.0 25.0 28.0 dB Conversion Gain 4 CG4 fRF = 470 MHz, PRF = –30 dBm *2 26.0 29.0 32.0 dB Conversion Gain 5 CG5 fRF = 800 MHz, PRF = –30 dBm *2 26.0 29.0 32.0 dB Noise Figure 1 NF1 fRF = 55 MHz *3 − 10.5 13.0 dB Noise Figure 2 NF2 fRF = 200 MHz *3 − 10.5 13.0 dB Noise Figure 3 NF3 fRF = 470 MHz *3 − 10.5 13.0 dB Noise Figure 4 NF4 fRF = 470 MHz *3 − 9.5 12.0 dB Noise Figure 5 NF5 fRF = 800 MHz *3 − 10.0 13.0 dB Maximum Output Power 1 P O(SAT)1 fRF = 55 MHz, PRF = 0 dBm *2 4.0 6.0 − dBm Maximum Output Power 2 P O(SAT)2 fRF = 200 MHz, PRF = 0 dBm *2 4.0 6.0 − dBm Maximum Output Power 3 P O(SAT)3 fRF = 470 MHz, PRF = 0 dBm *2 4.0 6.0 − dBm Maximum Output Power 4 P O(SAT)4 fRF = 470 MHz, PRF = 0 dBm *2 4.0 6.0 − dBm Maximum Output Power 5 P O(SAT)5 fRF = 800 MHz, PRF = 0 dBm *2 4.0 6.0 − dBm *1 By measurement circuit 1 *2 By measurement circuit 2 *3 By measurement circuit 3

Data Sheet P12151EJ3V0DS006 µµµµPC3202GR STANDARD CHARACTERISTICS (Reference Values) (TA = 25°C, VCC = 5 V) Parameter Symbol Test Conditions Value for Reference Unit Third order intermodulation distortion 1 IM31V H F , fRF 1 = 470 MHz, fRF 2 = 476 MHz, Pin = –30 dBm each, fOSC = 515 MHz, POSC = –10 dBm *1 55 dBc Third order intermodulation distortion 2 IM32 UHF, f RF 1 = 800 MHz, fRF 2 = 806 MHz, Pin = –30 dBm each, fOSC = 845 MHz, POSC = –10 dBm *1 46 dBc 1% cross-modulation distortion 1 CM1 VHF, f RF = 470 MHz, fundes = 476 MHz, fOSC = 515 MHz, PRF = –40 dBm, POSC = –10 dBm, AM100 kHz, 30% modulation, DES/CM = 46 dBc*1 96 dB µ 1% cross-modulation distortion 2 CM2 UHF, f RF = 800 MHz, fundes = 806 MHz, fOSC = 845 MHz, PRF = –40 dBm, POSC = –10 dBm, AM100 kHz, 30% modulation, DES/CM = 46 dBc*1 88 dB µ *1 By measurement circuit 4

Data Sheet P12151EJ3V0DS00 7 µµµµPC3202GR TYPICAL CHARACTERISTICS (V CC = 5 V) 123456 0123456 –10 –20 –30 V CC vs. ICC VCC vs. ICC Pin vs. Pout ICC - Circuit Current - mA ICC - Circuit Current - mA Pin - Input Power - dBm Pout - Output Power - dBm VCC - Supply Voltage - V V CC - Supply Voltage - V UHF no input signal T A = –20 ˚C TA = 25 ˚C TA = 80 ˚C measurement circuit 1 VHF f RF = 470 MHz fOSC = 515 MHz POSC = –10 dBm TA = –20 ˚C TA = 25 ˚C TA = 80 ˚C measurement circuit 2 –10 –20 –30 Pin vs. Pout Pin - Input Power - dBm Pout - Output Power - dBm UHF fRF = 800 MHz fOSC = 845 MHz POSC = –10 dBm TA = –20 ˚C TA = 25 ˚C TA = 80 ˚C measurement circuit 2 0 200 400 600 800 fRF vs. CG, NF fRF - Input Frequency - MHz CG - Conversion Gain - dB NF - Noise Figure - dB TA = –20 ˚C TA = 25 ˚C TA = 80 ˚C VHF no input signal T A = –20 ˚C TA = 25 ˚C TA = 80 ˚C measurement circuit 1 fOSC = fRF + 45 MHz PRF = –30 dBm POSC = –10 dBm measurement circuit 2 or 3

Data Sheet P12151EJ3V0DS008 µµµµPC3202GR STANDARD CHARACTERISTICS (V CC = 5 V) –10 –20 –30 –40 –50 –60 –70 IM3 IM3 Pin - Input Power - dBm Pout - Output Power - dBm –10 –20 –30 –40 –50 –60 –70 Pin - Input Power - dBm Pout - Output Power - dBm VHF fRF 1 = 470 MHz fRF 2 = 476 MHz fOSC = 515 MHz POSC = –10 dBm TA = –20 ˚C TA = 25 ˚C TA = 80 ˚C measurement circuit 4 UHF f RF 1 = 800 MHz fRF 2 = 806 MHz fOSC = 845 MHz POSC = –10 dBm TA = –20 ˚C TA = 25 ˚C TA = 80 ˚C measurement circuit 4 0 200 400 600 800 110 100 f RF vs. CM CM - 1 % Cross Modulation Distortion - dB fRF - Input Frequency - MHz fundes = fRF + 6 MHz fOSC = fRF + 45 MHz PRF = –40 dBm POSC = –10 dBm measurement circuit 4 TA = –20 ˚C TA = 25 ˚C TA = 80 ˚C µ

Data Sheet P12151EJ3V0DS00 9 µµµµPC3202GR STANDARD CHARACTERISTICS (V CC = 5 V, TA = 25°C, on Application circuit example) –10 –20 –30 –40 –50 –60 –70 IM3 IM3 Pin - Input Power - dBm Pout - Output Power - dBm VHF fRF 1 = 360 MHz fRF 2 = 366 MHz fOSC = 405 MHz 0 200 400 600 800 110 100 fRF vs. CM CM - 1 % Cross Modulation Distortion - dB fRF - Input Frequency - MHz –10 –20 –30 Pin vs. Pout Pin - Input Power - dBm Pout - Output Power - dBm VHF fRF = 360 MHz fOSC = 405 MHz 0 200 400 600 800 fRF vs. CG, NF fRF - Input Frequency - MHz CG - Conversion Gain - dB NF - Noise Figure - dB fOSC = fRF + 45 MHz PRF = –30 dBm –10 –20 –30 Pin vs. Pout Pin - Input Power - dBm Pout - Output Power - dBm UHF fRF = 800 MHz fOSC = 845 MHz fundes = fRF + 6 MHz fOSC = fRF + 45 MHz PRF = –40 dBm –10 –20 –30 –40 –50 –60 –70 Pin - Input Power - dBm Pout - Output Power - dBm UHF fRF 1 = 800 MHz fRF 2 = 806 MHz fOSC = 845 MHz µ

Data Sheet P12151EJ3V0DS0010 µµµµPC3202GR INPUT IMPEDANCE (By measurement circuit 5) <VRF INPUT: 17 PIN> START 0.045000000 GHz STOP 0.500000000 GHz ∇ 1 45 MHz 890.25 Ω – 235.69 Ω ∇ 2 200 MHz 357.45 Ω – 356.78 Ω ∇ 3 470 MHz 95.016 Ω – 179.81 Ω <VRF INPUT: 20 PIN> START 0.400000000 GHz STOP 1.000000000 GHz ∇ 1 400 MHz 100.35 Ω – 190.80 Ω ∇ 2 600 MHz 40.156 Ω – 103.16 Ω ∇ 3 890 MHz 12.047 Ω – 46.439 Ω

Data Sheet P12151EJ3V0DS00 11 µµµµPC3202GR OUTPUT IMPEDANCE (By measurement circuit 5) <IF OUTPUT: 11 PIN> START 0.045000000 GHz STOP 0.065000000 GHz 1 ∇ 1 45 MHz 89.238 Ω – 49.805 Ω

Data Sheet P12151EJ3V0DS0012 µµµµPC3202GR MEASUREMENT CIRCUIT 1 UOSC VOSC 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 REG OPEN OPEN OPEN OPEN OPEN 1000 pF 1000 pF VCC (5 V) 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF UB (5 V) V CC (5 V) VHF UHF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF220 nH 220 nH pF 2.7 k VHF GND UHF 5 V 4pin Voltage MEASUREMENT CIRCUIT 2 SG1 UOSC VOSC Spectrum Analyzer 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 REG VHF UHF VHF UHF 1000 pF 1000 pF VCC (5 V) 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF UB (5 V) V CC (5 V) VHF UHF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF220 nH 220 nH pF 2.7 k VHF GND UHF 5 V 4pin Voltage SG2

Data Sheet P12151EJ3V0DS00 13 µµµµPC3202GR MEASUREMENT CIRCUIT 3 UOSC VOSC Noise Meter Noise Source 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 REG VHF UHF VHF UHF 1000 pF 1000 pF VCC (5 V) 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF UB (5 V) V CC (5 V) VHF UHF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF220 nH 220 nH pF 2.7 k VHF GND UHF 5 V 4pin Voltage SG1 MEASUREMENT CIRCUIT 4 MIX PAD UOSC VOSC Spectrum Analyzer 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 REG SG1 SG2 VHF UHF VHF UHF 1000 pF 1000 pF VCC (5 V) 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF UB (5 V) V CC (5 V) VHF UHF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF220 nH 220 nH pF 2.7 k VHF GND UHF 5 V 4pin Voltage SG3

Data Sheet P12151EJ3V0DS0014 µµµµPC3202GR MEASUREMENT CIRCUIT 5 U OSC V OSC 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 REG OPEN OPEN 1000 pF 1000 pF VCC (5 V) 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF UB (5 V) V CC (5 V) VHF UHF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF220 nH 220 nH VHF GND UHF 5 V 4pin Voltage Network Analyzer

Data Sheet P12151EJ3V0DS00 15 µµµµPC3202GR APPLICATION CIRCUIT EXAMPLE UOSC VOSC 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 REG 1000 pF 1000 pF VCC 1 pF 360 pF 47 k 47 k 47 k 47 k 2.7 k 47 k 47 k 360 pF 3 pF 6 pF 3 pF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF 10 pF pF 200 pF

1 T 363×2

2 T 4 T

1 T 363

0.5 pF UB (5 V) VHF OSC OUT VCC HB LB UHF 1000 pF 1000 pF 1000 pF 1000 pF 1000 pF 220 nH 220 nH URF IN VRF IN IF OUT pF 2.7 k Vtu Vtu The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.

Data Sheet P12151EJ3V0DS0016 µµµµPC3202GR ILLUSTRATION OF THE EVALUATION BOARD FOR APPLICATION CIRCUIT EXAMPLE (Surface) 1000 P 1000 P VRF IN URF IN UOSC IN IF OUT VOSC IN OSC OUT PC3202GR A B µ

Data Sheet P12151EJ3V0DS00 17 µµµµPC3202GR ILLUSTRATION OF THE EVALUATION BOARD FOR APPLICATION CIRCUIT EXAMPLE (Back side) VCC 1000 P 1000 P 1000 P 1000 P 1000 P 1000 P 1000 P 1000 P 220 nH 22 pF 2.7 k 1000 P 1000 P 47 k 47 k 47 k 47 k 47 k 47 k 2.7 k 7 T

4 T 2 T

3 P 1 P

360 P 360 P

0.5 P 82 P VtuLBHB UB

• should be removed
• :Through holes A B Notes:

Data Sheet P12151EJ3V0DS0018 µµµµPC3202GR PACKAGE DIMENSIONS

20 PIN PLASTIC SSOP (225 mil) (UNIT: mm)

1.8 MAX. +7˚ –3˚ 0.65 0.10 M 0.15 0.5 ± 0.2 11 0 6.7 ± 0.3 1.5 ± 0.1 0.1 ± 0.1 0.22 +0.10 –0.05 0.575 MAX. 0.15 +0.10 –0.05 6.4 ± 0.2 NOTE Each lead centerline is located within 0.10 mm of its true position (T.P.) at maximum material condition.

Data Sheet P12151EJ3V0DS00 19 µµµµPC3202GR NOTE ON CORRECT USE (1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesires oscillation). (3) Keep the track length of the ground pins as short as possible. (4) A low pass filter must be attached to V CC line. (5) A matching circuit must be externally attached to output port. RECOMMENDED SOLDERING CONDITIONS The following conditions (see table below) must be met when soldering this product. Please consult with our sales officers in case other soldering process is used or in case soldering is done under different conditions. For details of recommended soldering conditions for surface mounting, refer to information document SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E). µµµµPC3202GR Soldering Process Soldering Conditions Symbol Infrared ray reflow Peak package’s surface temperature: 235°C or below, Reflow time: 30 seconds or below (210°C or higher), Number of reflow process: 3, Exposure limit None) IR35-00-3 VPS Peak package’s surface temperature: 215°C or below, Reflow time: 40 seconds or below (200°C or higher), Number of reflow process: 3, Exposure limit None) VP15-00-3 Partial heating method Terminal temperature: 300°C or below, Flow time: 3 seconds or below, Exposure limit Note *1 Exposure limit before soldering after dry-pack package is opened. Storage conditions: 25 °C and relative humidity at 65 % or less. Caution Do not apply more than single process at once, except for “Partial heating method”.

µµµµPC3202GR NESAT (NEC Silicon Advanced Technology) is a trademark of NEC Corporation.

• The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
• No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.
• NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others.
• Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information.
• While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features.
• NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98. 8