UPC305 RENESAS | Alldatasheet
Document overview
- PDF pages: 9
Technical content
To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.
- All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipment; co mmunications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. BIPOLAR ANALOG INTEGRATED CIRCUT µ PC305 POSITIVE VOLTAGE STABILIZED POWER SUPPLY Document No. G10633EJ5V0DS00 (5th edition) Date Published October 2003 NS CP(K) Printed in Japan DATA SHEET 2003 The mark shows major revised points.
DESCRIPTION
The µ PC305 is a high-performance stabilized power supply that can supply a constant voltage in a wide temperature range even if the input voltage or load voltage fluctuates, by integrating a high-gain error amplifier and a temperature-compensating constant-voltage diode on a single chip.
FEATURES
- Wide output voltage variable range: Vo = 4.5 to 30 V, VDIF = 3 to 30 V
- Excellent load stability: 0.02%
- Good ripple rejection ratio: 0.003%/V
ORDERING INFORMATION
µ PC305G2 8-pin plastic SOP (5.72 mm (225) ) EQUIVALENT CIRCUIT
4 GND
2.2 kΩ 5 pF Q2 Q3 Q17 Q16 Q15 Q14 Q10 Q13 Q12 Q11 3 kΩ 6.8 kΩ 3 kΩ 4.4 kΩ R10 600 Ω 1.86 kΩ 1.32 kΩ R7 2.8 kΩ PIN CONFIGURATION (Top view) GND Reference voltage Error detection Compensation Output Input Current limiter Current output
Data Sheet G10633EJ5V0DS 2 µ PC305 ELECTRICAL SPECIFICATIONS Absolute Maximum Ratings (TA = 25°C, unless otherwise specified.) Parameter Symbol Ratings Unit Input Voltage VIN −0.3 to +40 V Input - Output Voltage Difference V DIF 40 V Maximum Output Current I O 50 mA Total Loss PT 440 Note mW Operating Temperature TA 0 to +70 °C Storage Temperature Tstg −55 to +125 °C Note Where TA > 25°C, perform derating at Tj = 125°C MAX., −4.4 mW/°C. Caution Product quality may suffer if the absolute maximum rating is exceed even momentarily for any parameter. That is, the absolute maximum ratings are rated values at which the product is on the verge of suffering physical damage, and therefore the product must be used under conditions that ensure that the absolute maximum ratings are not exceed. Electrical Characteristics (TA = 25°C, unless otherwise specified.) Parameter Symbol Condition MIN. TYP. MAX. Unit Input Voltage Range VIN 8.0 40 V Output Voltage Range VOUT 4.5 30 V Input - Output Voltage Difference V DIF 3.0 30 V Load Stability REGL 0 ≤ IO ≤ 12 mA, RSC = 18 Ω 0.02 0.05 % VIN - VOUT ≤ 5 V 0.025 0.06 %/V Input Stability REGIN VIN - VOUT > 5 V 0.015 0.03 %/V Ripple Rejection Ratio REJ CREF = 10 µF, f = 120 Hz 0.003 %/V Temperature Stability 0°C ≤ TA ≤ 70°C 0.3 1.0 % Reference Voltage VREF 1.65 1.8 1.90 V 10 Hz ≤ f ≤ 10 kHz, CREF = 0 µF 0.005 % Output Noise Voltage VN CREF = 0.1 µF 0.002 % Long-time Stability 0.1 % Supply Current under No Load I CC V IN = 40 V 1.0 2.0 mA Remark RSC: Current-limiting resistor C REF: Bypass capacitor of reference voltage pin
Data Sheet G10633EJ5V0DS 3 µ PC305 TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified. Reference values) −0.01 −0.02 −0.03 −0.04 0100806040200 51 0 1 5 2 0 Output Current I O (mA) Output Voltage Fluctuation (%) LOAD STABILITY (1) RSC = 0 Ω TA = 0°C TA = +70°C Operating Temperture TA (°C) Total Loss PT (mW) PT vs.TA CHARACTERISTICS −0.02 −0.04 −0.06 −0.08 −0.1 500 400 300 200 100 01 0 2 0 3 0 Output Current I O (mA) Output Current IO (mA) Output Voltage Fluctuation (%) LOAD STABILITY (2) RSC = 13 Ω TA = 25°C 100 05 0 Output Voltage Drop Ratio (%) CURRENT-LIMITING CHARACTERISTICS RSC = 13 Ω 3.2 3.0 2.8 2.6 2.4 2.2 2.0 51 0 2 0 Output Voltage (V) R2 Resistance (kΩ) RESISTANCE FOR SETTING OUTPUT VOLTAGE 0.6 0.5 0.4 0.3 0.2 08 0 6020 Operating Temperature T A (°C) Pickup Voltage Across Pins <1> and <8> (V) CURRENT-LIMITING PICKUP VOLTAGE 10 20 30 40 TA = 25°C R1 = 1110 x VOUT (Ω) R1//R2 = 2 kΩ TA = 0°C TA = 0°C TA = +70°C TA = +70°C
Data Sheet G10633EJ5V0DS 4 µ PC305 −40 400 −400 01 0 2 0 Response Time ( s) Output Voltage Fluctuation (mV) TRANSIENT RESPONSE TIME LINE LOAD CL = 1 F RSC = 10 Ω IFL = 20 mA INL = 1.0 mA VOUT = 10 V VOUT = 10 V RSC = 10 Ω ∆VIN = 5 V 11 02 Input - Output Voltage Difference VDIF (V) Output Voltage Fuctuation Ratio (%) LINE REGULATION VOUT = 10 V TA = 25˚C CREF = 0 F CREF = 10 F f ≤ 120 Hz 52 0 0.1 0.05 0.02 0.01 0.005 0.002 0.001 µ µ µ µ µCL = 0 F APPLICATION CIRCUIT EXAMPLES R3 13 Ω VO = 5 V C1 47 pF 3.1 kΩ CREF 10 F 0.01 F 1 F VIN ≥ 8 V + + 5.6 kΩ µ µ µ R3 1.3 Ω 0.5 W VO = 10 V C1 47 pF 2.45 kΩ CREF 10 F 0.01 F 3.3 F VIN ≥ 13 V 11.2 kΩ µ µ µ 2SA1008 R3 1.3 Ω 2 W VO = 15 V C1 47 pF 2.3 kΩ CREF 10 F 0.1 F 1.2 kΩ 130 Ω 110 Ω 50 F VIN ≥ 19 V 16.7 kΩ µ µ C4 1 Fµ µ 2SA1008 2SC2331 47 pF VIN 2 kΩ 1.8 Ω 2 W 680 Ω 2SC2331 2SC2517 68 Ω Load
5 V - 15 mA Regulator
15 V - 1 A Regulator (Fold-back Characteristics)
10 V - 200 mA Regulator (Drooping Characteristics)
1 A Constant-current Regulator
Caution Note the power consumption of the µ PC305 when the output pin is short-circuited and that of the external transistor.
Data Sheet G10633EJ5V0DS 5 µ PC305 PACKAGE DRAWING ITEM B C I 8-PIN PLASTIC SOP (5.72 mm (225)) D E F G H J P MILLIMETERS 1.27 (T.P.) 0.78 MAX. 4.4± 0.15 0.1± 0.1 0.42 1.59± 0.21 6.5± 0.3 1.49 +0.08 −0.07 1.1± 0.2 3°+7° −3° NOTE Each lead centerline is located within 0.12 mm of its true position (T.P.) at maximum material condition. A 5.2 +0.17 −0.20 K L M N 0.6± 0.2 0.17 0.12 0.10 +0.08 −0.07 S8GM-50-225B-6 1 4 S M C detail of lead end A M S N F G B E D P H I J K L
Data Sheet G10633EJ5V0DS 6 µ PC305 RECOMMENDED SOLDERING CONDITIONS The µ PC305 should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact an NEC Electronics sales representative. For technical information, see the following website. Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html) Type of Surface Mount Device µ PC305G2: 8-pin plastic SOP (5.72 mm (225) ) Process Conditions Symbol Infrared reflow Package peak temperature: 230°C, time: 30 sec MAX. (210°C MIN.), number of times: once IR30-00-1 number of times: once VP15-00-1 Wave soldering Solder bath temperature: 260°C MAX., time: 10 sec MAX., number of times: once, preheating temperature: 120°C MAX. (package surface temperature) WS60-00-1 Caution Do not use different soldering methods together (except for partial heating) .
µ PC305 REFERENCE DOCUMENTS Usage of Three-terminal Regulators (G12702E) Quality Grades on NEC Semiconductor Devices (C11531E) Review of Quality and Reliability Handbook (C12769E) Semiconductor Selection Guide -Products and Packages- (X13769X) The information in this document is current as of October, 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1