UPC2715T RENESAS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 14

Technical content

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.

  1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipmen t; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

Caution: Electro-static sensitive devices BIPOLAR ANALOG INTEGRATED CIRCUIT PPPPPC2715T

1.2 GHz LOW POWER CONSUMPTION WIDE BAND AMPLIFIER

SILICON BIPOLAR MONOLITHIC INTEGRATED CIRCUIT 1993© Document No. P12432EJ2V0DS00 (2nd edition) (Previous No. IC-2952) Date Published March 1997 N Printed in Japan DATA SHEET

FEATURES

  • Low power consumption : 15 mW (V CC = 3.4 V, ICC = 4.5 mA) TYP.
  • High power gain : 19 dB TYP. @ f = 0.5 GHz
  • Excellent frequency response: 1.2 GHz TYP. @ 3 dB down below the gain at 0.1 GHz
  • Input and output matching : 50 :
  • Super small package : 6 pin mini mold

ORDERING INFORMATION

PART NUMBER PACKAGE SUPPLYING FORM PPC2715T-E3 6 pin mini mold Embossed tape 12 mm wide. Pin 1, 2, 3 face to perforation side of the tape. EQUIVALENT CIRCUIT PIN CONNECTIONS OUT VCC GND IN (Top View) C 1 L (Bottom View) 1. INPUT 2. GND 3. GND 4. OUTPUT 5. GND 6. V CC Discontinued Product

ABSOLUTE MAXIMUM RATINGS (T A = +25 °C) Supply Voltage V CC 4.1 V Total Circuit Current I CC 7.5 mA Power Dissipation P D 280* mW Operating Temperature T opt ð40 to +85 °C Storage Temperature T stg ð55 to +150 °C Input Power P in 0 dBm * Mounted on 50 u 50 u 1.6 mm epoxy glass PWD (TA = +85 °C) RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL MIN. TYP. MAX. UNIT Supply Voltage V CC 3.06 3.4 3.74 V ELECTRICAL CHARACTERISTICS (T A = +25 °C, VCC = 3.4 V, ZS = ZL = 50 ::::) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Circuit Current I CC 3.3 4.5 5.7 mA No Signal Power Gain G P 16 19 23 dB f = 0.5 GHz Maximum Output Level P O(sat) ð9 ð6 dBm f = 0.5 GHz, P in = ð10 dBm Noise Figure NF 4.5 6.0 dB f = 0.5 GHz Upper Limit Operating Frequency f U 0.9 1.2 GHz 3 dB down below flat gain f = 0.1 GHz Isolation ISL 28 33 dB f = 0.5 GHz Input Return Loss RL in 12 17 dB f = 0.5 GHz Output Return Loss RL out 5 8 dB f = 0.5 GHz Gain Flatness 'G P ±1.0 dB f = 0.1 to 0.6 GHz Discontinued Product

50 Ω IN C 1 2, 3, 5 C 3 1 000 pF VCC C 2 1 000 pF 50 Ω OUT 1 000 pF EXAMPLE OF APPLICATION CIRCUIT 50 Ω IN C 1 2, 3, 5 C 3 1 000 pF VCC C 4 1 000 pF C 5 2, 3, 5 C 6 1 000 pF C 2 1 000 pF 50 Ω OUT 1 000 pF1 000 pF R 1 50 to 200 Ω To stabilize operation, please connect R1, C5 The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Capacitors for VCC , input and output pins 1 000 pF capacitors are recommendable as bypass capacitor for VCC pin and coupling capacitors for input/output pins. Bypass capacitor for VCC pin is intended to minimize VCC pin’s ground impedance. Therefore, stable bias can be supplied against VCC fluctuation. Coupling capacitors for input/output pins are intended to minimize RF serial impedance and cut DC. To get flat gain from 100 MHz up, 1 000 pF capacitors are assembled on the test circuit. [Actually, 1 000 pF capacitors give flat gain at least 10 MHz. In the case of under 10 MHz operation, increase the value of coupling capacitor such as 2 200 pF. Because the coupling capacitors are determined by the equation of C = 1/(2 S fZs).] Discontinued Product

TYPICAL CHARACTERISTICS (T A = òòòò25 °C) ICC – Circuit Current – mA3 CIRCUIT CURRENT vs. SUPPLY VOLTAGE 0 0.5 2 3 4 5 VCC – Supply Voltage – V ICC – Circuit Current – mA CIRCUIT CURRENT vs. OPERATING TEMPERATURE 0–40 Topt – Operating Temperature – °C 40 80 VCC = 3.4 V G P – Insertion Power Gain – dB 0.3 1.0 2.0 f – Frequency – GHz NOISE FIGURE AND INSERTION POWER GAIN vs. FREQUENCY NF – Noise Figure – dB 4 0 VCC = 3.74 V VCC = 3.4 V VCC = 3.06 V VCC = 3.4 V VCC = 3.06 V 0.1 0.3 1.0 2.0 f – Frequency – GHz G P – Insertion Power Gain – dB INSERTION POWER GAIN vs. FREQUENCY VCC = 3.4 V ISL – Isolation – dB ISOLATION vs. FREQUENCY 0.3 1.0 2.0 f – Frequency – GHz –20 –30 –40 0.1 VCC = 3.4 V 0.3 1.0 2.0 f – Frequency – GHz –20 –30 –40 –10 0.1 INPUT RETURN LOSS, OUTPUT RETURN LOSS vs. FREQUENCY RL in – Input Return Loss – dB RL out – Output Return Loss – dB VCC = 3.4 V RL out RL in 1 1.5 4.5 2.5 3.5 –20 20 60 100 NF G P 0.1 TA = –40 °C 25 °C 85 °C –10 VCC = 3.74 V Discontinued Product

PO – Output Power – dBm –10 –25 OUTPUT POWER vs. INPUT POWER –50 Pin – Input Power – dBm PO – Output Power – dBm Pin – Input Power – dBm VCC = 3.4 V f = 0.5 GHz PO(sat) – Saturated Output Power – dBm 0.2 2 f – Frequency – GHz –15 0.1 –30 –40 –30 –20 OUTPUT POWER vs. INPUT POWER SATURATED OUTPUT POWER vs. FREQUENCY IM3 – 3rd Order Intermodulation Distortion – dBc PO(each) – Output Power of Each Tone – dBm –60 –30 –20 –10 –40 –40 –20 –10 THIRD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE –15 –10 f = 0.5 GHz 0.5 1 f 1 = 0.500 GHz f2 = 0.502 GHz –10 3.74 V 3.6 V Pin = –10 dBm –20 3.06 V 3.74 V VCC = 3.4 V –10 –25 –50 –30 –40 –30 –20 –15 –10 –20 TA = 85 °C TA = –40 °C TA = 85 °C TA = 25 °C TA = –40 °C VCC = 3.4 V VCC = 3.74 V 3.06 V 3.4 V –50 Discontinued Product

–160 –90 00 60 8090100 110 120 130 140 150 0.02 –150 –140 0.06 0.44 0.12 0.38 0.26 0.24 0.28 0.22 0.30 0.20 0.32 0.18 0.34 0.16 0.36 0.14 0.38 0.12 0.40 0.10 0.42 0.08 0.44 0.06 0.46 0.04 0.48 0.02 0.47 0.37 0.25 0.23 0.21 0.19 0.17 0.15 0.130.11 0.09 0.07 0.05 0.03 0.01 0.01 0.03 0.04 0.46 0.45 0.05 –130 0.43000.07 –1200.08 0.42 0.41 0.09 –110 –1000.10 0.40 0.39 0.11 0.13 –80 –70 0.04 0.36 0.35 0.15 –60 0.16 0.34 0.33 0.17 –50 –40 –30 0.18 0.32 0.20 0.300.31 0.29 0.19 000.21 –20 –10 0.22 0.28 0.24 0.26 0.270.23 0.25 0.27 0.29 0.31 0.33 0.35 0.370.39 0.41 0.43 0.45 0.47 0.49 0.49 0.48 1.8 0.2 0.1 0.3 NEGATIVE REACTANCE COM PONENT O 0.4 0.5 0.6 0.7 0.8 1.0 1.4 1.6 2.0 3.0 4.0 6.0 5.0 3.0 4.0 2.0 0.3 0.4 0.5 0.6 6.0 4.0 3.0 1.8 1.6 1.4 0.21.00.90.8 0.5 0.4 0.3 0.2 +JX –––– Z O 0.2 0.4 0.6 0.8 0.7 0.6 0.1 0.1 0.2 0.7 0.8 0.9 1.0 1.2 1.4 1.6 R –––– ZO ) 1.0 0.8 1.0 0.6 0.4 0.2 0.2 0.4 0.8 0.6 1.0 1.0 0.2 0.4 0.6 0.8 0.9 1.2 1.8 2.0 REACTANCE COMPONENT ANGLE OF REFLECTION COEFFCIENT IN DEGREES W AVELENGTHS TOW ARD GENERATOR POS ITIVE REACTANCE CO MPONENT 0.1 G 0.5 G 1.0 G S22-FREQUENCY –160 –90 00 60 8090100 110 120 130 140 150 0.02 –150 –140 0.06 0.44 0.12 0.38 0.26 0.24 0.28 0.22 0.30 0.20 0.32 0.18 0.34 0.16 0.36 0.14 0.38 0.12 0.40 0.10 0.42 0.08 0.44 0.06 0.46 0.04 0.48 0.02 0.47 0.37 0.25 0.23 0.21 0.19 0.17 0.15 0.130.11 0.09 0.07 0.05 0.03 0.01 0.01 0.03 0.04 0.46 0.45 0.05 –130 0.43000.07 –1200.08 0.42 0.41 0.09 –110 –1000.10 0.40 0.39 0.11 0.13 –80 –70 0.04 0.36 0.35 0.15 –60 0.16 0.34 0.33 0.17 –50 –40 –30 0.18 0.32 0.20 0.300.31 0.29 0.19 000.21 –20 –10 0.22 0.28 0.24 0.26 0.270.23 0.25 0.27 0.29 0.31 0.33 0.35 0.370.39 0.41 0.43 0.45 0.47 0.49 0.49 0.48 1.8 0.2 0.1 0.3 NEGATIVE REACTANCE COM PONENT O 0.4 0.5 0.6 0.7 0.8 1.0 1.4 1.6 2.0 3.0 4.0 6.0 5.0 3.0 4.0 2.0 0.3 0.4 0.5 0.6 6.0 4.0 3.0 1.8 1.6 1.4 0.21.00.90.8 0.5 0.4 0.3 0.2 +JX –––– Z O 0.2 0.4 0.6 0.8 0.7 0.6 0.1 0.1 0.2 0.7 0.8 0.9 1.0 1.2 1.4 1.6 R –––– ZO ) 1.0 0.8 1.0 0.6 0.4 0.2 0.2 0.4 0.8 0.6 1.0 1.0 0.2 0.4 0.6 0.8 0.9 1.2 1.8 2.0 REACTANCE COMPONENT ANGLE OF REFLECTION COEFFCIENT IN DEGREES W AVELENGTHS TOW ARD GENERATOR POS ITIVE REACTANCE CO MPONENT 0.1 G 0.5 G 1.0 G Discontinued Product

6 PINS MINI MOLD PACKAGE DIMENSIONS (Unit: mm)

0.13±0.10.3+0.1 –0.05 0.8 1.1 +0.2 –0.1 0 to 0.1 123 65 4 1.9 2.9±0.2 0.950.95 1.5 +0.2 –0.1 2.8 +0.2 –0.3 Discontinued Product

(1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as wide as possible to prevent an increase in ground impedance (which can cause abnormal oscillation). (3) Keep the track length of the ground pins as short as possible. (4) Connect a bypass capacitor (having, for example, a capacitance of 1 000 pF) to the V CC pin. RECOMMENDED SOLDERING CONDITIONS This product should be soldered in the following recommended conditions. Other soldering methods and conditions than the recommended conditions are to be consulted with our sales representatives. PPC2715T Soldering method Soldering conditions Recommended condition symbols Infrared ray reflow Package peak temperature: 235 °C, Hour: within 30 s. (more than 210 °C), Time: 3 times, Limited days; no.* IR35-00-3 Hour: within 40 s. (more than 200 °C), Time: 3 times, Limited days: no.* VP15-00-3 Wave soldering Soldering tub temperature: less than 260 °C, Hour: within 10 s. Time: 1 time, Limited days: no.* WS60-00-1 Pin part heating Pin area temperature: less than 300 °C, Hour: within 3 s. Limited days: no.* *: It is the storage days after opening a dry pack, the storage conditions are 25 °C, less than 65 % RH. Note 1.The combined use of soldering method is to be avoided (However, except the pin area heating method). For details of recommended soldering conditions for surface mounting, refer to information document SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E). Discontinued Product

Illustration of evaluation board for the test circuit 7.5 5 9– 7.5 Through holes 10 10 2.52.52.52.533 2.52.52.52.5 72– 0.5 Through holes 15 (Surface) 0.9 3 4.8 IN 2.8 1.2 1.2 0.4 7.5 OUT 2.8 30±0.05 VCC φ 7.55 φ φ 30±0.05 22 0.75 0.2 0.75 4.8 0.21.2 3.6 2.5 (Back side) Note (1) 30 uuuu 30 uuuu 0.4 mm double sided copper clad polyimide board. (2) Back side: GNDpattern (3) Solder plated on pattern (4) : Through holes Discontinued Product

[MEMO] Discontinued Product

[MEMO] Discontinued Product

No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product. M4 96. 5 Discontinued Product