UPC2711TB-E3

UPC2711TB NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

PART NUMBER UPC2711TB UPC2712TB PACKAGE OUTLINE S06 S06 SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX MIN TYP MAX ICC Circuit Current (no signal) mA 9 12 15 9 12 15 G P Power Gain, f = 1 GHz dB 11 13 16.5 18 20 23.5 fU Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 100 MHz) GHz 2.7 2.9 2.2 2.6 ∆G P Gain Flatness, f = 0.1 GHz to 2.5 GHz dB ±0.8 ±0.8 PO (SAT) Maximum Output Level, f = 1 GHz, PIN = 0 dBm dBm -2 +1 0 +3 NF Noise Figure, f = 1 GHz dB 5 6.5 4.5 6 RL IN Input Return Loss, f = 1 GHz dB 20 25 9 12 RL OUT Output Return Loss, f = 1 GHz dB 9 12 10 13 ISOL Isolation, f = 1 GHz dB 25 30 28 33 The UPC2711TB and UPC2712TB are Silicon MMIC Wideband Amplifiers manufactured using NEC's 20 GHz fT NESAT TM III silicon bipolar process. These devices are designed for use as buffer amps in DBS tuners. The UPC2711/12TB are pin compatible and have comparable performance as the larger UPC2711/12T, so they are suitable for use as a replacement to help reduce system size. These IC's are housed in a 6 pin super minimold or SOT-363 package. NEC's stringent quality assurance and test procedure ensure the highest reliability and performance.

DESCRIPTION

ELECTRICAL CHARACTERISTICS (TA = +25 °C, VCC = 5.0 V, ZL = ZS = 50 Ω ) UPC2711TB UPC2712TB

5 V, SUPER MINIMOLD

SILICON MMIC WIDEBAND AMPLIFIER

FEATURES

• HIGH DENSITY SURFACE MOUNTING: 6 pin super minimold or SOT- 363 package
• SUPPLY VOLTAGE: VCC = 4.5 to 5.5 V
• WIDEBAND RESPONSE: UPC2711TB: fu = 2.9 GHz TYP UPC2712TB: fu = 2.6 GHz TYP
• POWER GAIN: UPC2711TB: G P = 13 dB TYP UPC2712TB: G P = 20 dB TYP California Eastern Laboratories GAIN vs. FREQUENCY Frequency, f (GHz) Gain, GP (dB) TYPICAL PERFORMANCE CURVES UPC2712TB UPC2711TB

ABSOLUTE MAXIMUM RATINGS 1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS VCC Supply Voltage V 6 PIN Input Power dBm +10 PT Total Power Dissipation2 mW 200 TOP Operating Temperature °C -45 to +85 TSTG Storage Temperature °C -55 to +150 RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER UNITS MIN TYP MAX VCC Supply Voltage V 4.5 5.0 5.5 TOP Operating Temperature ˚C -40 +25 +85 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on double sided copper clad 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85°C). UPC2711TB, UPC2712TB Pin Pin Applied No. Name Voltage Description Internal Equivalent Circuit (V) 1 Input Signal input pin. An internal matching circuit, configured with resistors, enables 50 Ω connection over a wide bandwidth. A multi-feedback circuit is designed to cancel the deviations of h FE and resistance. This pin must be coupled to the signal source with a blocking capacitor. 4 Output Signal output pin. An internal matching circuit, configured with resistors, enables 50 Ω connection over a wide bandwidth. This pin must be coupled to the output load with a blocking capacitor. CC 4.5 to 5.5 Power supply pin. This pin should be externally equipped with a bypass capacitor to minimize ground impedance. 2 GND 0 Ground pin. This pin should be connected 3 to system ground with minimum inductance.

5 Ground pattern on the board should be

formed as wide as possible. All the ground pins must be connected together with wide ground pattern to minimize impedance difference. PIN DESCRIPTION

UPC2711TB, UPC2712TB TYPICAL PERFORMANCE CURVES (TA = 25°C) Gain, G S (dB) Frequency, f (GHz) Gain, G S (dB) Frequency, f (GHz) Isolation, ISOL, (dB) Frequency, f (GHz) Frequency, f (GHz) Input Return Loss, RL IN (dB) Output Return Loss, RL OUT (dB) UPC2711TB ISOLATION vs. FREQUENCY UPC2711TB INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY UPC2711TB GAIN AND NOISE FIGURE vs. FREQUENCY AND VOLTAGE UPC2711TB GAIN vs. FREQUENCY AND TEMPERATURE UPC2711TB CURRENT vs. VOLTAGE Current, I CC (mA) UPC2711TB CURRENT vs. TEMPERATURE Current, I CC (mA) Temperature, TA (°C)Voltage, VCC (V) Noise Figure, NF (dB) 0 12 4 56 3 -40-60 -20 20 40 60 80 1000 VCC = 5.0 V 4-5 0.30.1 1.0 3.0 VCC = 5.5 V VCC = 5.5 V VCC = 5.0 V VCC = 4.5 V VCC = 4.5 V VCC = 5.0 V G S NF 0.30.1 1.0 3.0 TA = -40°C VCC = 5.0 V TA = +25°C TA = +25°C TA = +85°C TA = -40°C TA = +25°C -10 -20 -30 -40 -50 0.30.1 1.0 3.0 VCC = 5.0 V -10 -20 -30 -40 0.30.1 1.0 3.0 VCC = 5.0 V RL OUT RL IN

UPC2711TB, UPC2712TB TYPICAL PERFORMANCE CURVES (TA = 25°C) Output Power, P OUT (dBm) Input Power, PIN (dBm) Output Power, P OUT (dBm) Frequency, f (GHz) Saturated Output Power, P SAT (dBm) Input Power, PIN (dBm) Output Power of Each Tone, POUT(each) (dBm) 3rd Order Intermodulation Distortion, IM 3 (dBc) UPC2711TB SATURATED OUTPUT POWER vs. FREQUENCY AND VOLTAGE UPC2711TB 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER AND VOLTAGE UPC2711TB OUTPUT POWER vs. INPUT POWER AND VOLTAGE UPC2711TB OUTPUT POWER vs. INPUT POWER AND FREQUENCY UPC2711TB OUTPUT POWER vs. INPUT POWER VOLTAGE Output Power, P OUT (dBm) UPC2711TB OUTPUT POWER vs. INPUT POWER AND TEMPERATURE Output Power, P OUT (dBm) Input Power, PIN (dBm)Input Power, PIN (dBm) -10 -15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 VCC = 5.0 V f = 1.0 GHz 4.5 V 5.5 V -10 -15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 VCC = 5.0 V f = 1.0 GHz +85°C -40°C -20°C TA = +25°C -10 -15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 f = 2.0 GHz 5.5 V 4.5 V VCC = 5.0 V -10 -15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 VCC = 5.0 V f = 0.5 GHz f = 1.0 GHz f = 2.0 GHz f = 2.9 GHz -10 -15 0.1 0.3 1.0 3.0 PIN = 0 dBm5.5 V 4.5 V VCC = 5.0 V -10 -20 -30 -40 -50 4.5 V 5.5 V VCC = 5.0 V f1 = 1.000 GHz f2 = 1.002 GHz

UPC2711TB, UPC2712TB TYPICAL PERFORMANCE CURVES (TA = 25°C) Gain, G S (dB) Frequency, f (GHz) Gain, G S (dB) Frequency, f (GHz) Isolation, ISOL, (dB) Frequency, f (GHz) Frequency, f (GHz) nput Return Loss, RL IN (dB) Output Return Loss, RL OUT (dB) UPC2712TB ISOLATION vs. FREQUENCY UPC2712TB INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY UPC2712TB GAIN AND NOISE FIGURE vs. FREQUENCY AND VOLTAGE UPC2712TB GAIN vs. FREQUENCY AND TEMPERATURE UPC2712TB CURRENT vs. VOLTAGE Current, I CC (mA) UPC2712TB CURRENT vs. TEMPERATURE Current, I CC (mA) Temperature, TA (°C)Voltage, VCC (V) Noise Figure, NF (dB) 0 12 4 56 3 -40-60 -20 20 40 60 80 1000 VCC = 5.0 V 0.30.1 1.0 3.0 VCC = 5.0 V VCC = 5.5 V VCC = 5.5 V VCC = 4.5 V VCC = 5.0 V G S NF 0.30.1 1.0 3.0 -40°C +25°C VCC = 5.0 V TA = +85°C -10 -20 -30 -40 -50 0.30.1 1.0 3.0 VCC = 5.0 V -10 -20 -30 -40 0.30.1 1.0 3.0 VCC = 5.0 V RL OUT RL IN

UPC2711TB, UPC2712TB TYPICAL PERFORMANCE CURVES (TA = 25°C) Output Power, P OUT (dBm) Input Power, PIN (dBm) Output Power, P OUT (dBm) Frequency, f (GHz) Saturated Output Power, P SAT (dBm) Input Power, PIN (dBm) Output Power of Each Tone, POUT(each) (dBm) 3rd Order Intermodulation Distortion, IM 3 (dBc) UPC2712TB SATURATED OUTPUT POWER vs. FREQUENCY AND VOLTAGE UPC2712TB 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER AND VOLTAGE UPC2712TB OUTPUT POWER vs. INPUT POWER AND VOLTAGE UPC2712TB OUTPUT POWER vs. INPUT POWER AND FREQUENCY UPC2712TB OUTPUT POWER vs. INPUT POWER VOLTAGE Output Power, P OUT (dBm) UPC2712TB OUTPUT POWER vs. INPUT POWER AND TEMPERATURE Output Power, P OUT (dBm) Input Power, PIN (dBm)Input Power, PIN (dBm) -10 -15 -20 -25 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 VCC = 5.0 V f = 1.0 GHz 4.5 V 5.5 V -10 -15 -20 -25 -40 -35 -30 -25 -20 -15 -10 -5 0 5 VCC = 5.0 V f = 1.0 GHz +85°C -40°C TA = +25°C -10 -15 -20 -25 -40 -35 -30 -25 -20 -15 -10 -5 0 5 f = 2.0 GHz 5.5 V VCC = 5.0 V 4.5 V -10 -15 -20 -25 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 VCC = 5.0 V f = 0.5 GHz f = 1.0 GHz f = 2.0 GHz -10 0.1 0.3 1.0 3.0 PIN = 2 dBm5.5 V 4.5 V VCC = 5.0 V -10 -20 -30 -40 -50 4.5 V 5.5 V VCC = 5.0 V f1 = 1.000 GHz f2 = 1.002 GHz

FREQUENCY S 11 S21 S12 S22 K (MHz) MAG ANG MAG ANG MAG ANG MAG ANG TYPICAL SCATTERING PARAMETERS (TA = 25°C) UPC2711TB VCC = 5 V, ICC = 13.8 mA UPC2711TB, UPC2712TB

UPC2711TB, UPC2712TB FREQUENCY S 11 S21 S12 S22 K (MHz) MAG ANG MAG ANG MAG ANG MAG ANG TYPICAL SCATTERING PARAMETERS (TA = 25°C) UPC2712TB VCC = 5 V, ICC = 13.9 mA

UPC2711TB, UPC2712TB OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE S06 PIN CONNECTIONS 1. Input 2. GND 3. GND Marking is an example of UPC2711TB 4. Output 5. GND 6. V CC TEST CIRCUIT PART NUMBER MARKING QTY UPC2711TB-E3 C1G 3K/reel UPC2712TB-E3 C1H 3K/reel

ORDERING INFORMATION

Note: Embossed tape, 8 mm wide. Pins 1, 2, and 3 face perforated side of tape. +0.1 DOT ON BACK SIDE +0.1 -0.50 ~0.1 0.2 0.15 1 6 40.65 1.3 2.0±0.2 0.65 2.1±0.1 1.25±0.1 0.9 ± 0.1 0.7 C1G 6C1G (Top View) (Bottom View) IN OUT VCC 1000 pF 1000 pF1000 pF 2, 3, 5 50 Ω 50 Ω EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 3/98DATA SUBJECT TO CHANGE WITHOUT NOTICE