UPC2400A

UPC2400A RENESAS | Alldatasheet

Document overview

• PDF pages: 16

Technical content

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.

1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipment; co mmunications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

© 1995 DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT µPC2400A Series

DESCRIPTION

µPC2400A Series are low dropout regulators which have 1 A capable for the output current. These ICs are built-in the saturation protection circuit of the output transistor.

FEATURES

• Built-in the saturation protection circuit of the output transistor.
• The capability of output current is 1 A
• High accuracy of output voltage.
• Low dropout voltage. VDIF ≤ 1 V (IO ≤ 1 A, TJ ≤ 125 ˚C)
• Built-in overcurrent protection circuit, thermal shut-down circuit.
• Built-in Safe Operating Area protection circuit.
• Compatible for µPC2400 Series.

ORDERING INFORMATION

Output Voltage Type Number Package

5 V µPC2405AHF MP-45G

6 V µPC2406AHF (Isolated TO-220)

7 V µPC2407AHF

8 V µPC2408AHF

9 V µPC2409AHF

10 V µPC2410AHF

12 V µPC2412AHF

15 V µPC2415AHF

18 V µPC2418AHF

Document No. G10352EJ2V0DS00 (2nd edition) Date Published December 1995 P Printed in Japan THREE TERMINAL LOW DROPOUT VOLTAGE REGULATOR CONNECTION DIAGRAM (TOP VIEW) 1: INPUT 2: GND 3: OUTPUT

µPC2400A Series BLOCK DIAGRAM Start-up circuit Thermal shut down Reference voltage Drive circuit Over-current protection Saturation protection Safe operating area protection Error amplifier INPUT OUTPUT GND

µPC2400A Series ABSOLUTE MAXIMUM RATINGS (T A = 25 ˚C, Unless otherwise specified.) PARAMETER SYMBOL RATING UNIT Input Voltage VIN 36 V Internal Power Dissipation PT(TC = 25 ˚C) 15 Note W Operating Ambient Temperature Range T A –20 to +85 ˚C Operating Junction Temperature Range T J –20 to +150 ˚C Storage Temperature Range Tstg –55 to +150 ˚C Thermal Resistance (Junction to Case) R th(J - C) 5.0 ˚C/W Thermal Resistance (Junction to Ambient) Rth(J - A) 65 ˚C/W Note Internally limited TYPICAL CONNECTION OUTPUTµ PC2400AINPUT D 2C OUT D 1 C IN C IN : 0.1 to 0.47 µF. C OUT : More than 47 µF. D 1 : Need for VO > VIN. D 2 : Need for VO < GND. RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL TYPE NUMBER MIN. TYP. MAX. UNIT Input Voltage VIN µPC2405AHF 6 9 20 V µPC2406AHF 7 10 21 µPC2407AHF 8 11 22 µPC2408AHF 9 13 23 µPC2409AHF 10 14 24 µPC2410AHF 11 15 25 µPC2412AHF 13 18 27 µPC2415AHF 16 22 27 µPC2418AHF 19 25 28 Output Current IO All 0 1 A Operating Ambient Temperature Range TA All –20 +85 ˚C Operating Junction Temperature Range TJ All –20 +125 ˚C

µPC2400A Series

ELECTRICAL CHARACTERISTICS

µPC2405A (V IN = 9 V, IO = 500 mA, TJ = 25 ˚C, Unless otherwise specified) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Output Voltage VO 4.9 5.0 5.1 V 4.85 5.15 6 V ≤ VIN ≤ 20 V, 5 mA ≤ IO ≤ 500 mA, 0 ˚C ≤ TJ ≤ 125 ˚C 4.85 5.15 5 mA ≤ IO ≤ 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Line Regulation REG IN 6 50 mV 6.5 V ≤ VIN ≤ 20 V Load Regulation REG L 3 50 mV 5 mA ≤ IO ≤ 1 A Quiescent Current IBIAS 2.3 3.2 mA I O = 0 96 0 I O = 1 A Start-up Current IBIAS(S) 15 mA V IN = 4.5 V, IO = 0 mA 75 VIN = 4.5 V, IO = 1 A Quiescent Current Change Δ IBIAS 20 mA 6.5 V ≤ VIN ≤ 20 V, IO = 1 A Output Noise Voltage Vn 90 µVrms 10 Hz ≤ f ≤ 100 kHz Ripple Rejection R·R 59 64 dB f = 120 Hz, 6.5 V ≤ VIN ≤ 16.5 V Dropout Voltage VDIF 0.5 1.0 V I O = 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Short Circuit Current IOshort 1.2 A V IN = 20 V Peak Output Current IOpeak 1.65 2.2 3.1 A Temperature Coefficient of Δ VO /Δ T –0.4 mV/˚C I O = 5 mA, 0 ˚C ≤ TJ ≤ 125 ˚C Output Voltage µPC2406A (V IN = 10 V, IO = 500 mA, TJ = 25 ˚C, Unless otherwise specified) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Output Voltage VO 5.88 6.0 6.12 V 5.82 6.18 7 V ≤ VIN ≤ 21 V, 5 mA ≤ IO ≤ 500 mA, 0 ˚C ≤ TJ ≤ 125 ˚C 5.82 6.18 5 mA ≤ IO ≤ 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Line Regulation REG IN 7 60 mV 7.5 V ≤ VIN ≤ 21 V Load Regulation REG L 4 60 mV 5 mA ≤ IO ≤ 1A Quiescent Current IBIAS 2.3 3.2 mA I O = 0 96 0 I O = 1 A Start-up Current IBIAS(S) 15 mA V IN = 5.5 V, IO = 0 mA 75 VIN = 5.5 V, IO = 1 A Quiescent Current Change Δ IBIAS 20 mA 7.5 V ≤ VIN ≤ 21 V, IO = 1 A Output Noise Voltage Vn 110 µVrms 10 Hz ≤ f ≤ 100 kHz Ripple Rejection R·R 58 63 dB f = 120 Hz, 7.5 V ≤ VIN ≤ 17.5 V Dropout Voltage VDIF 0.5 1.0 V I O = 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Short Circuit Current IOshort 1.2 A V IN = 21 V Peak Output Current IOpeak 1.65 2.2 3.1 A Temperature Coefficient of Δ VO /ΔT 0.4 mV/˚C I O = 5 mA, 0 ˚C ≤ TJ ≤ 125 ˚C Output Voltage

µPC2400A Series µPC2407A (V IN = 11 V, IO = 500 mA, TJ = 25 ˚C, Unless otherwise specified) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Output Voltage VO 6.86 7.0 7.14 V 6.79 7.21 8 V ≤ VIN ≤ 22 V, 5 mA ≤ IO ≤ 500 mA, 0 ˚C ≤ TJ ≤ 125 ˚C 6.79 7.21 5 mA ≤ IO ≤ 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Line Regulation REG IN 8 70 mV 8.5 V ≤ VIN ≤ 22 V Load Regulation REG L 4 70 mV 5 mA ≤ IO ≤ 1 A Quiescent Current IBIAS 2.3 3.2 mA I O = 0 96 0 I O = 1 A Start-up Current IBIAS(S) 15 mA V IN = 6.5 V, IO = 0 mA 75 VIN = 6.5 V, IO = 1 A Quiescent Current Change Δ IBIAS 20 mA 8.5 V ≤ VIN ≤ 22 V, IO = 1 A Output Noise Voltage Vn 130 µVrms 10 Hz ≤ f ≤ 100 kHz Ripple Rejection R·R 57 62 dB f = 120 Hz, 8.5 V ≤ VIN ≤ 18.5 V Dropout Voltage VDIF 0.5 1.0 V I O = 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Short Circuit Current IOshort 1.2 A V IN = 22 V Peak Output Current IOpeak 1.65 2.2 3.1 A Temperature Coefficient of Δ VO /ΔT 0.4 mV/˚C I O = 5 mA, 0 ˚C ≤ TJ ≤ 125 ˚C Output Voltage µPC2408A (V IN = 13 V, IO = 500 mA, TJ = 25 ˚C, Unless otherwise specified) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Output Voltage VO 7.85 8.0 8.15 V 7.75 8.25

9 V ≤ VIN ≤ 23 V, 5 mA ≤ IO ≤ 500 mA,

0 ˚C ≤ TJ ≤ 125 ˚C 7.75 8.25 5 mA ≤ IO ≤ 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Line Regulation REG IN 9 80 mV 9.5 V ≤ VIN ≤ 23 V Load Regulation REG L 5 80 mV 5 mA ≤ IO ≤ 1 A Quiescent Current IBIAS 2.3 3.2 mA I O = 0 96 0 I O = 1 A Start-up Current IBIAS(S) 15 mA V IN = 7.5 V, IO = 0 mA 75 VIN = 7.5 V, IO = 1 A Quiescent Current Change Δ IBIAS 20 mA 9.5 V ≤ VIN ≤ 23 V, IO = 1 A Output Noise Voltage Vn 150 µVrms 10 Hz ≤ f ≤ 100 kHz Ripple Rejection R·R 56 61 dB f = 120 Hz, 9.5 V ≤ VIN ≤ 19.5 V Dropout Voltage VDIF 0.5 1.0 V I O = 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Short Circuit Current IOshort 1.2 A V IN = 23 V Peak Output Current IOpeak 1.6 2.2 3.05 A Temperature Coefficient of Δ VO /ΔT 0.5 mV/˚C I O = 5 mA, 0 ˚C ≤ TJ ≤ 125 ˚C Output Voltage

µPC2400A Series µPC2409A (V IN = 14 V, IO = 500 mA, TJ = 25 ˚C, Unless otherwise specified) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Output Voltage VO 8.82 9.0 9.18 V 8.73 9.27 10 V ≤ VIN ≤ 24 V, 5 mA ≤ IO ≤ 500 mA, 0 ˚C ≤ TJ ≤ 125 ˚C 8.73 9.27 5 mA ≤ IO ≤ 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Line Regulation REG IN 11 90 mV 10.5 V ≤ VIN ≤ 24 V Load Regulation REG L 5 90 mV 5 mA ≤ IO ≤ 1 A Quiescent Current IBIAS 2.4 3.2 mA I O = 0 96 0 I O = 1 A Start-up Current IBIAS(S) 15 mA V IN = 8.5 V, IO = 0 mA 75 VIN = 8.5 V, IO = 1 A Quiescent Current Change Δ IBIAS 20 mA 10.5 V ≤ VIN ≤ 24 V, IO = 1 A Output Noise Voltage Vn 170 µVrms 10 Hz ≤ f ≤ 100 kHz Ripple Rejection R·R 55 60 dB f = 120 Hz, 10.5 V ≤ VIN ≤ 20.5 V Dropout Voltage VDIF 0.5 1.0 V I O = 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Short Circuit Current IOshort 1.0 A V IN = 24 V Peak Output Current IOpeak 1.6 2.2 3.05 A Temperature Coefficient of Δ VO /ΔT 0.9 mV/˚C I O = 5 mA, 0 ˚C ≤ TJ ≤ 125 ˚C Output Voltage µPC2410A (V IN = 15 V, IO = 500 mA, TJ = 25 ˚C, Unless otherwise specified) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Output Voltage VO 9.8 10 10.2 V 9.7 10.3

11 V ≤ VIN ≤ 25 V, 5 mA ≤ IO ≤ 500 mA,

0 ˚C ≤ TJ ≤ 125 ˚C 9.7 10.3 5 mA ≤ IO ≤ 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Line Regulation REG IN 12 100 mV 11.5 V ≤ VIN ≤ 25 V Load Regulation REG L 6 100 mV 5 mA ≤ IO ≤ 1A Quiescent Current IBIAS 2.4 3.2 mA I O = 0 96 0 I O = 1 A Start-up Current IBIAS(S) 15 mA V IN = 9.5 V, IO = 0 mA 75 VIN = 9.5 V, IO = 1 A Quiescent Current Change Δ IBIAS 20 mA 11.5 V ≤ VIN ≤ 25 V, IO = 1 A Output Noise Voltage Vn 190 µVrms 10 Hz ≤ f ≤ 100 kHz Ripple Rejection R·R 54 59 dB f = 120 Hz, 11.5 V ≤ VIN ≤ 21.5 V Dropout Voltage VDIF 0.5 1.0 V I O = 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Short Circuit Current IOshort 1.0 A V IN = 25 V Peak Output Current IOpeak 1.6 2.2 3.05 A Temperature Coefficient of Δ VO /ΔT 0.8 mV/˚C I O = 5 mA, 0 ˚C ≤ TJ ≤ 125 ˚C Output Voltage

µPC2400A Series µPC2412A (V IN = 18 V, IO = 500 mA, TJ = 25 ˚C, Unless otherwise specified) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Output Voltage VO 11.75 12 12.25 V 11.65 12.35 13 V ≤ VIN ≤ 27 V, 5 mA ≤ IO ≤ 500 mA, 0 ˚C ≤ TJ ≤ 125 ˚C 11.65 12.35 5 mA ≤ IO ≤ 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Line Regulation REG IN 14 120 mV 14 V ≤ VIN ≤ 27 V Load Regulation REG L 7 120 mV 5 mA ≤ IO ≤ 1 A Quiescent Current IBIAS 2.4 3.2 mA I O = 0 10 60 IO = 1 A Start-up Current IBIAS(S) 15 mA V IN = 11.5 V, IO = 0 mA 75 VIN = 11.5 V, IO = 1 A Quiescent Current Change Δ IBIAS 20 mA 14 V ≤ VIN ≤ 27 V, IO = 1 A Output Noise Voltage Vn 230 µVrms 10 Hz ≤ f ≤ 100 kHz Ripple Rejection R·R 53 58 dB f = 120 Hz, 14 V ≤ VIN ≤ 24 V Dropout Voltage VDIF 0.5 1.0 V I O = 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Short Circuit Current IOshort 0.8 A V IN = 27 V Peak Output Current IOpeak 1.58 2.2 3.03 A Temperature Coefficient of Δ VO /ΔT 0.8 mV/˚C I O = 5 mA, 0 ˚C ≤ TJ ≤ 125 ˚C Output Voltage µPC2415A (V IN = 22 V, IO = 500 mA, TJ = 25 ˚C, Unless otherwise specified) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Output Voltage VO 14.7 15 15.3 V 14.55 15.45 16 V ≤ VIN ≤ 27 V, 5 mA ≤ IO ≤ 500 mA, 0 ˚C ≤ TJ ≤ 125 ˚C 14.55 15.45 5 mA ≤ IO ≤ 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Line Regulation REG IN 18 150 mV 17 V ≤ VIN ≤ 27 V Load Regulation REG L 9 150 mV 5 mA ≤ IO ≤ 1A Quiescent Current IBIAS 2.5 3.2 mA I O = 0 10 60 IO = 1 A Start-up Current IBIAS(S) 15 mA V IN = 14.5 V, IO = 0 mA 75 VIN = 14.5 V, IO = 1 A Quiescent Current Change Δ IBIAS 20 mA 17 V ≤ VIN ≤ 27 V, IO = 1 A Output Noise Voltage Vn 290 µVrms 10 Hz ≤ f ≤ 100 kHz Ripple Rejection R·R 51 56 dB f = 120 Hz, 17 V ≤ VIN ≤ 27 V Dropout Voltage VDIF 0.5 1.0 V I O = 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Short Circuit Current IOshort 0.8 A V IN = 27 V Peak Output Current IOpeak 1.55 2.2 3.0 A Temperature Coefficient of Δ VO /ΔT 1.6 mV/˚C I O = 5 mA, 0 ˚C ≤ TJ ≤ 125 ˚C Output Voltage

µPC2400A Series µPC2418A (V IN = 25 V, IO = 500 mA, TJ = 25 ˚C, Unless otherwise specified) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Output Voltage VO 17.64 18 18.36 V 17.46 18.54 19 V ≤ VIN ≤ 28 V, 5 mA ≤ IO ≤ 500 mA, 0 ˚C ≤ TJ ≤ 125 ˚C 17.46 18.54 5 mA ≤ IO ≤ 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Line Regulation REG IN 22 180 mV 20 V ≤ VIN ≤ 28 V Load Regulation REG L 11 180 mV 5 mA ≤ IO ≤ 1 A Quiescent Current IBIAS 2.5 3.2 mA I O = 0 10 60 IO = 1 A Start-up Current IBIAS(S) 15 mA V IN = 17.5 V, IO = 0 mA 75 VIN = 17.5 V, IO = 1 A Quiescent Current Change Δ IBIAS 20 mA 20 V ≤ VIN ≤ 28 V, IO = 1 A Output Noise Voltage Vn 350 µVrms 10 Hz ≤ f ≤ 100 kHz Ripple Rejection R·R 49 54 dB f = 120 Hz, 20 V ≤ VIN ≤ 28 V Dropout Voltage VDIF 0.5 1.0 V I O = 1 A, 0 ˚C ≤ TJ ≤ 125 ˚C Short Circuit Current IOshort 0.8 A V IN = 28 V Peak Output Current IOpeak 1.55 2.2 3.0 A Temperature Coefficient of Δ VO /ΔT 2.5 mV/˚C I O = 5 mA, 0 ˚C ≤ TJ ≤ 125 ˚C Output Voltage

µPC2400A Series TYPICAL CHARACTERISTICS 1.92 Pd - TA Pd – Power Dissipation – W 100 125 150 With Infinite Heatsink With 10 ˚C/W Heatsink Without Heatsink 85 ˚C –50 100 ΔV O – Output Voltage Deviation – mV 100 150 TA – Ambient Temperature – ˚C VIN = 9 V ID = 5 mA –100 µ ΔV O - TJ ( PC2405A) TJ – Junction Temperature – ˚C VO - VIN ( PC2405A) VO – Output Voltage – V VIN – Input Voltage – V TJ = 25 ˚C VO = 0 mA 500 mA 1 A µ IBIAS – Quiescent Current – mA µ IBIAS (IBIAS(S)) - VIN ( PC2405A) VIN – Input Voltage – V TJ = 25 ˚C 0.2 0.8 0.6 VDIF –Dropout Voltage – V 100 150 IO = 1 A VDIF - TJ TJ – Junction Temperature – ˚C IO = 1 A 500 mA 0 mA 0.4 IOpeak –Peak Output Current – A IOpeak - (VIN - VO ) (VIN - VO ) – Input Output Differential – V TJ = –20 ˚C 25 ˚C 125 ˚C

µPC2400A Series TYPICAL CHARACTERISTICS 101 102 103 104 105 f – Frequency – Hz R · R - f ( PC2405A) µ TJ = 25 ˚C IO = 500 mA R · R – Ripple Rejection – dB 0.8 0.6 0.2 IO – Output Current – A VDIF - IO TJ = 25 ˚C ΔV O = –2 % VDIF – Dropout Voltage – V 0.4 0.2 0.4 0.6 0.8 1.0 0.5 t – Time – s LOAD TRANSIENT RESPONSE ( PC2405A) TJ = 25 ˚C VIN = 9 V C IN = 0.33 F C OUT = 47 F ΔV O – Output Voltage Deviation – V IO – Output Current – A +0.1 µ µ –0.1 µ µ t – Time – s LINE TRANSIENT RESPONSE ( PC2405A) TJ = 25 ˚C IO = 0.5 A C IN = 0.33 F C OUT = 47 F ΔV O – Output Voltage Deviation – V VIN – Input Voltage – V +0.2 µ µ –0.2 µ µ

µPC2400A Series PACKAGE DIMENSIONS (Unit: mm) µPC2400AHF Series 3PIN PLASTIC SIP (MP-45G)

µPC2400A Series RECOMMENDED SOLDERING CONDITIONS The following conditions (see table below) must be met when soldering this product. Please consult with our sales offices in case other soldering process is used, or in case soldering is done under different conditions. TYPES OF THROUGH HOLE MOUNT DEVICE µPC2400AHF Series Soldering Process Soldering Conditions Symbol Wave soldering Solder temperature: 260 ˚C or below. Flow Time: 10 seconds or below. REFERENCE Document Name Document No. NEC semiconductor device reliability/quality control system. IEI-1212 Quality grade on NEC semiconductor devices. IEI-1209 Semiconductor device mounting technology manual. IEI-1207 Semiconductor device package manual. IEI-1213 Guide to quality assurance for semiconductor devices. MEI-1202 Semiconductor selection guide. MF-1134

µPC2400A Series [MEMO]

µPC2400A Series No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: “Standard“, “Special“, and “Specific“. The Specific quality grade applies only to devices developed based on a customer designated “quality assurance program“ for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices in “Standard“ unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact NEC Sales Representative in advance. Anti-radioactive design is not implemented in this product. M4 94.11