UPB587G RENESAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 10
Technical content
To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.
- All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipmen t; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
The µPB587G is a divide by 2/4/8 prescaler for portable VHF/UHF TV and radio applications. This IC operates up to 1 GHz with 2.2 to 3.5 V bias supply by utilizing highly efficient ECL process technology. This IC is packaged in 8 pin SOP. Thus, this IC can contribute to produce a physically small and low voltage PLL synthesizer in conjunction with DTS microcomputer 17K series.
FEATURES
- Low power operation : 2.2 to 3.5 V
- Low supply current : 5.5 mA (TYP.) at 3 V
- Divide by 2/4/8
- Wide band operation : • 50 to 1000 MHz @ Divide by 8
- 50 to 600 MHz @ Divide by 4
- 50 to 300 MHz @ Divide by 2
- High sensitivity : –18 dBm (MIN.)
ORDERING INFORMATION
PART NUMBER PACKAGE SUPPLYING FORM QUALITY GRADE µPB587G-E1 8 pin plastic SOP Embossed tape 12 mm wide. QTY 2.5 k/reel Standard(225 mil) Pin1 is in tape pull-out direction. µPB587G-E2 8 pin plastic SOP Embossed tape 12 mm wide. QTY 2.5 k/reel Standard(225 mil) Pin1 is in tape roll-in direction. Caution: Electro-static sensitive devices BIPOLAR DIGITAL INTEGRATED CIRCUIT Document No. IC-2314B (O.D. No. IC-7566A) Date Published June 1994 P Printed in Japan 1 GHz DIVIDE-BY-2/4/8 3 V, 5.5 mA PRESCALER µPB587G Please refer to "Quality grade on NEC Semiconductor Devices" (Document number IEI-1209) published by NEC Corporation to know the specification of quality grade on the devices and its recommended applications. © 1988 DATA SHEET Discontinued Product
µPB587G INTERNAL BLOCK DIAGRAM AMP. 1/2 1/2 1/2 BUF. VCC1 1 8 VCC2
7 OUT
PIN CONFIGURATION (Top View) VCC1 GND IN IN VCC2 OUT M PIN DESCRIPTION PIN No. SYMBOL DESCRIPTION 1V CC1 Power Supply Pin of Input Amplifier and Divider
2 IN Signal Input Pin
3 IN Input Bypass Pin should be connected to ground through bypass
capacitor (e.g. 1000 pF)
4 GND Ground Pin
7 OUT Output Pin
CC2 Power Supply Pin of Output Buffer 5M 1 6M 2 Discontinued Product
µPB587G ABSOLUTE MAXIMUM RATINGS Supply Voltage V CC –0.5 to +4.0 V Input Voltage to M pin V I –0.5 to V CC + 0.5 V Input Level to IN pin P in 10 dBm Power Dissipation P D 250 mW Storage Temperature T stg –65 to +150 °C RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL MIN. TYP. MAX. UNIT Supply Voltage V CC 2.2 3.0 3.5 V Operating Temperature T opt –20 +75 °C ELECTRICAL CHARACTERISTICS (V CC = 2.2 to 3.5 V, T a = –20 to +75 °C, ZS = 50 Ω , ZL = 200 Ω ) PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITIONS Supply Current I CC 5.5 7.5 mA V CC = 3.0 V, T a = +25 °C Output Voltage V O 0.1 0.3 V P-P OUT pin, f in = 500 MHz, Pin = –10 dBm Input Power P in1 –20 0 dBm IN pin, f in = 100 to 1000 MHz Input Power P in2 –18 0 dBm IN pin, f in ≥ 50 MHz Operating Frequency f in1 100 1000 MHz IN pin, P in = –20 to 0 dBm Divide by 8 Operating Frequency f in2 50 1000 MHz IN pin, P in = –18 to 0 dBm Divide by 8 Operating Frequency f in3 100 600 MHz IN pin, P in = –20 to 0 dBm Divide by 4 Operating Frequency f in4 50 600 MHz IN pin, P in = –18 to 0 dBm Divide by 4 Operating Frequency f in5 100 300 MHz IN pin, P in = –20 to 0 dBm Divide by 2 Operating Frequency f in6 50 300 MHz IN pin, P in = –18 to 0 dBm Divide by 2 Division ratio control VIH VCC VCC × 1.1 VM 1, M2 pininput high Division ratio control VIL 0 VCC – 0.5 VM 1, M2 pininput low TEST CIRCUIT C C C C C OUTPUT 200 W C C VCC INPUT C: 1 000 pF Discontinued Product
µPB587G CHARACTERISTICS ON THE APPLICATION CIRCUIT (V CC = 2.2 to 3.5 V, T a = –20 to +75 °C) PARAMETER SYMBOL REFERENCE VALUE (UNIT: V) CONDITIONS MIN. TYP. MAX. Division ratio control VIH VCC – 0.2 5.5input high Division ratio control VIL 0V CC × 0.3input low Application circuit example C C C C C OUTPUT C C VCC INPUT R R The application circuits and their parameters are for references only and are not intended for use in actual design-in's. R = 300 kΩ C: 2 200 pF External registor 300 k Ω on application circuit example Discontinued Product
TYPICAL CHARACTERISTICS – ON THE TEST CIRCUIT – +10 −10 −20 −30 −40 −50 −60 Pin - Input Power - dBm fin - Input Frequency - GHz VCC = 2.2 V VCC = 3.0 V VCC = 3.5 V +10 −10 −20 −30 −40 −50 −60 Pin - Input Power - dBm fin - Input Frequency - GHz Ta = −20 °C Ta = +25 °C Ta = +75 °C +10 −10 −20 −30 −40 −50 −60 Pin - Input Power - dBm fin - Input Frequency - GHz VCC = 2.2 V VCC = 3.0 V VCC = 3.5 V +10 −10 −20 −30 −40 −50 −60 Pin - Input Power - dBm fin - Input Frequency - GHz Ta = −20 °C Ta = +25 °C Ta = +75 °C +10 −10 −20 −30 −40 −50 −60 Pin - Input Power - dBm fin - Input Frequency - GHz VCC = 2.2 V VCC = 3.0 V VCC = 3.5 V +10 −10 −20 −30 −40 −50 −60 Pin - Input Power - dBm fin - Input Frequency - GHz Ta = −20 °C Ta = +25 °C Ta = +75 °C INPUT POWER vs. INPUT FREQUENCY (Divide by 8, Ta = +25 °C) INPUT POWER vs. INPUT FREQUENCY (Divide by 8, VCC = 2.2 V) INPUT POWER vs. INPUT FREQUENCY (Divide by 4, Ta = +25 °C) INPUT POWER vs. INPUT FREQUENCY (Divide by 4, VCC = 2.2 V) INPUT POWER vs. INPUT FREQUENCY (Divide by 2, Ta = +25 °C) INPUT POWER vs. INPUT FREQUENCY (Divide by 2, VCC = 2.2 V) µ Discontinued Product
µPB587G
8 PIN PLASTIC SOP (225 mil)
A F G E B L I detail of lead end +7° –3° M M D C K H J N S8GM-50-225B-3 ITEM MILLIMETERS INCHES A B C D E F G H I J K 5.37 MAX. 1.27 (T.P.) 0.40 0.1 ±0.1 1.8 MAX. 1.49 6.5 ±0.3 0.78 MAX. 0.212 MAX. 0.004 ±0.004 0.071MAX. 0.256 ±0.012 0.173 0.031 MAX. NOTE L M 0.12 0.6 ±0.2 1.1 4.4 0.016 0.005 0.024 +0.008 –0.009 Each lead centerline is located within 0.12 mm (0.005 inch) of its true position (T.P.) at maximum material condition. 0.043 0.059 0.050 (T.P.) +0.10 –0.05 +0.004 –0.003 0.15 +0.10 –0.05 0.006 +0.004 –0.002 N 0.10 0.004 Discontinued Product
µPB587G NOTE ON CORRECT USE (1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as wide as possible to keep the minimum ground impedance (to prevent undesired operation). (3) Keep the wiring length of the ground pins as short as possible. (4) Connect a bypass capacitor (e.g. 1 000 pF) to the V CC pin. RECOMMENDED SOLDERING CONDITIONS This product should be soldered in the following recommended conditions. Other soldering methods and conditions than the recommended conditions are to be consulted with our sales representatives. µPB587G Soldering method Soldering conditions Recommended condition symbol Infrared ray reflow Package peak temperature: 235 °C, Hour: within 30 s. (more than 210 °C), IR35-00-2 Time: 2 times, Limited days: no. * Hour: within 40 s. (more than 200 °C), VP15-00-2 Time: 2 times, Limited days: no. * Wave soldering Soldering tub temperature: less than 260 °C, Hour: within 10 s. WS60-00 Time: 1 time, Limited days: no. Pin part heating Pin area temperature: less than 300 °C, Hour: within 10 s. Limited days: no. * *: It is the storage days after opening a dry pack, the storage conditions are 25 °C, less than 65 % RH. Note 1. The combined use of soldering method is to be avoided (However, except the pin area heating method). For details of recommended soldering conditions for surface mounting, refer to information document SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (IEI-1207). Discontinued Product
µPB587G [MEMO] No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. The devices listed in this document are not suitable for use in aerospace equipment, submarine cables, nuclear reactor control systems and life support systems. If customers intend to use NEC devices for above applications or they intend to use "Standard" quality grade NEC devices for applications not intended by NEC, please contact our sales people in advance. Application examples recommended by NEC Corporation Standard: Computer, Office equipment, Communication equipment, Test and Measurement equipment, Machine tools, Industrial robots, Audio and Visual equipment, Other consumer products, etc. Special: Automotive and Transportation equipment, Traffic control systems, Antidisaster systems, Anticrime systems, etc. M4 92.6 Discontinued Product