UPB1506GV RENESAS | Alldatasheet

Document overview

  • PDF pages: 22

Technical content

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.

  1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipment; co mmunications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

Caution: Electro-static sensitive devices BIPOLAR DIGITAL INTEGRATED CIRCUITS PP PPPB1506GV, PP PPPB1507GV 3GHz INPUT DIVIDE BY 256, 128, 64 PRESCALER IC FOR ANALOG DBS TUNERS 1996© Document No. P10767EJ3V0DS00 (3rd edition) Date Published January 1998 N CP(K) Printed in Japan DATA SHEET The PPB1506GV and PPB1507GV are 3.0 GHz input, high division silicon prescaler ICs for analog DBS tuner applications. These ICs divide-by-256, 128 and 64 contribute to produce analog DBS tuners with kit-use of 17 K series DTS controller or standard CMOS PLL synthesizer IC. The PPB1506GV/ PPB1507GV are shrink package versions of the PPB586G/588G or PPB1505GR so that these smaller packages contribute to reduce the mounting space replacing from conventional ICs. The PPB1506GV and PPB1507GV are manufactured using NEC’s high fT NESAT™IV silicon bipolar process. This process uses silicon nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution and prevent corrosion/migration. Thus, these ICs have excellent performance, uniformity and reliability.

FEATURES

x High toggle frequency : f in = 0.5 GHz to 3.0 GHz x High-density surface mounting : 8-pin plastic SSOP (175 mil) x Low current consumption : 5 V, 19 mA x Selectable high division : y256, y128, y64 x Pin connection variation : PPB1506GV and PPB1507GV APPLICATION These ICs can use as a prescaler between local oscillator and PLL frequency synthesizer included modulus prescaler. For example, following application can be chosen; x Analog DBS tuner’s synthesizer x Analog CATV converter synthesizer

ORDERING INFORMATION

PART NUMBER PACKAGE MARKING SUPPLYING FORM PPB1506GV-E1 8-pin plastic 1506 Embossed tape 8 mm wide. Pin 1 is in tape pull-out PPB1507GV-E1 SSOP (175 mil) 1507 direction. 1 000 p/reel. Remarks To order evaluation samples, please contact your local NEC sales office. (Part number for sample order: PPB1506GV, PPB1507GV)

PP PPPB1506GV, PP PPPB1507GV PIN CONNECTION (Top View) Pin NO. PPB1506GV PPB1507GV 1S W 1 I N 2I N V CC 3I N S W 1 4G N D O U T 5N C G N D 6S W 2 S W 2

7 OUT NC

(division, Freq.) Part No. ICC (mA) fin (GHz) VCC (V) Package Pin connection y256, y128, y64 PPB1505GR 14 0.5 to 3.0 4.5 to 5.5 Standard PPB1507GV 19 0.5 to 3.0 4.5 to 5.5 Standard Remarks x This table shows the TYP values of main parameters. Please refer to ELECTRICAL CHARACTERISTICS. x PPB586G and PPB588G are discontinued. INTERNAL BLOCK DIAGRAM D CLK CLK Q Q D CLK Q Q D CLK Q Q D CLK Q Q D CLK Q Q D CLK Q Q D CLK Q Q D CLK Q Q SW1 SW2 AMP OUT IN IN

PP PPPB1506GV, PP PPPB1507GV SYSTEM APPLICATION EXAMPLE RF unit block of Analog DBS tuners CMOS PLL synthesizer BPF SAW AGC amp. FM demo. LPF OSC MIX Baseband output High division prescaler PB1506GV or PB1507GV µ µ To 2150 MHz To 2650 MHz loop filter 1stIF input from DBS converter RF unit block of Analog CATV converter CMOS PLL synthesizer BPF BPF LPF OSC upconverterTo 800 MHz To 2000 MHz loop filter To 1300 MHz downconverter High division prescaler PB1506GV or PB1507GV µ µ

PP PPPB1506GV, PP PPPB1507GV PIN EXPLANATION Pin no. PPB1506GV PPB1507GV IN  2.9 Signal input pin. This pin should be coupled to signal source with capacitor (e.g. 1 000 pF) for DC cut. IN  2.9 Signal input bypass pin. This pin must be equipped with bypass capacitor (e.g. 1 000 pF) to minimize ground impedance. GND 0  Ground pin. Ground pattern on the board should be formed as wide as possible to minimize ground impedance. SW1 H/L  Divide ratio input pin. The ratio can be determined by following applied level to these pins. SW2 These pins should be equipped with bypass capacitor (e.g. 1 000 pF) to minimize ground impedance. VCC 4.5 to 5.5  Power supply pin. This pin must be equipped with bypass capacitor (e.g. 10 000 pF) to minimize ground impedance. OUT  2.6 to 4.7 Divided frequency output pin. This pin is designed as emitter follower output. This pin can be connected to CMOS input due to 1.2 V P-P MIN output. NC  Non connection pin. This pin must be openned. 5 7 SW1 Applied voltage V Pin voltage V Pin name Functions and explanation SW2 HL H y64 y128 L y128 y256

PP PPPB1506GV, PP PPPB1507GV ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL CONDITION RATINGS UNIT Supply voltage VCC TA = +25 qC ð0.5 to +6.0 V Input voltage Vin TA = +25 qC ð0.5 to VCC + 0.5 V Total power dissipation PD Mounted on double sided copper clad 50 u 50 u 1.6 mm epoxy glass PWB (TA = +85 qC) 250 mW Operating ambient temperature T A ð40 to +85 qC Storage temperature Tstg ð55 to +150 qC RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL MIN. TYP. MAX. UNIT NOTICE Supply voltage VCC 4.5 5.0 5.5 V Operating ambient temperature T A ð40 +25 +85 qC ELECTRICAL CHARACTERISTICS (T A = ðð ðð40 to +85 qq qqC, VCC = 4.5 to 5.5 V, ZS = 50 :: ::) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Circuit current ICC No signals 12.5 19 26.5 mA Upper limit operating frequency fin(u) Pin = ð15 to +6 dBm 3.0  GHz Lower limit operating frequency 1 fin(L)1 Pin = ð10 to +6 dBm  0.5 GHz Lower limit operating frequency 2 fin(L)2 Pin = ð15 to +6 dBm  1.0 GHz Input power 1 Pin1 fin = 1.0 to 3.0 GHz ð15  +6 dBm Input power 2 Pin2 fin = 0.5 to 1.0 GHz ð10  +6 dBm Output Voltage Vout C L = 8 pF 1.2 1.6  VP-P Divide ratio control input high VIH1 Connection in the test circuit VCC VCC VCC Divide ratio control input low V IL1 Connection in the test circuit OPEN or GND OPEN or GND OPEN or GND Divide ratio control input high VIH2 Connection in the test circuit V CC VCC VCC Divide ratio control input low V IL2 Connection in the test circuit OPEN or GND OPEN or GND OPEN or GND

PP PPPB1506GV, PP PPPB1507GV TYPICAL CHARACTERISTICS (Unless otherwise specified TA = +25 qq qqC) 00123 V CC - Supply Voltage - V ICC - Circuit Current - mA 456 CIRCUIT CURRENT vs. SUPPLY VOLTAGE No signals TA = +85°C TA = +25°C TA = –40°C Divide by 64 mode +20 +10 –10 –20 –30 –40 –50 –60100 1000 4000 f in - Input Frequency - MHz Pin - Input Power - dBm INPUT POWER vs. INPUT FREQUENCY +20 +10 –10 –20 –30 –40 –50 –60100 1000 4000 f in - Input Frequency - MHz Pin - Input Power - dBm INPUT POWER vs. INPUT FREQUENCY 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2100 1000 4000 f in - Input Frequency - MHz Vout - Output Voltage - VP-P OUTPUT VOLTAGE vs.INPUT FREQUENCY 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4100 1000 4000 f in - Input Frequency - MHz Vout - Output Voltage - VP-P OUTPUT VOLTAGE vs.INPUT FREQUENCY TA = +25°C TA = +25°C Pin = –10 dBm TA = –40°C Pin = –10 dBm VCC = 4.5 to 5.5 V Guaranteed Operating Window Guaranteed Operating Window VCC = 4.5 to 5.5 V VCC = 4.5 to 5.5 V VCC = 4.5 V VCC = 5.0 V VCC = 5.5 V VCC = 5.5 V VCC = 5.0 V VCC = 4.5 V TA = –40°C TA = –40°C TA = +25°C TA = +25 °C TA = +85°C TA = +85°C

PP PPPB1506GV, PP PPPB1507GV 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4100 1000 4000 f in - Input Frequency - MHz Vout - Output Voltage - VP-P OUTPUT VOLTAGE vs. INPUT RFEQUENCY TA = +85°C Pin = –10 dBm VCC = 5.0 V VCC = 5.5 V VCC = 4.5 V Divide by 128 mode +20 +10 –10 –20 –30 –40 –50 –60100 1000 4000 f in - Input Frequency - MHz Pin - Input Power - dBm INPUT POWER vs. INPUT FREQUENCY +20 +10 –10 –20 –30 –40 –50 –60100 1000 4000 f in - Input Frequency - MHz Pin - Input Power - dBm INPUT POWER vs. INPUT FREQUENCY 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2100 1000 4000 f in - Input Frequency - MHz Vout - Output Voltage - VP-P OUTPUT VOLTAGE vs. INPUT FREQUENCY 100 1000 4000 fin - Input Frequency - MHz Vout - Output Voltage - VP-P OUTPUT VOLTAGE vs. INPUT FREQUENCY TA = +25°C TA = +25°C Pin = –10 dBm TA = –40°C Pin = –10 dBm VCC = 4.5 to 5.5 V Guaranteed Operating Window Guaranteed Operating Window VCC = 4.5 to 5.5 V VCC = 4.5 to 5.5 V TA = –40°C TA = –40°C TA = +25°C TA = +25°C TA = +85°C TA = +85°C VCC = 4.5 V VCC = 5.0 V VCC = 5.5 V VCC = 4.5 V VCC = 5.0 V VCC = 5.5 V

PP PPPB1506GV, PP PPPB1507GV 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2100 1000 4000 f in - Input Frequency - MHz Vout - Output-Voltage - VP-P OUTPUT VOLTAGE vs. INPUT FREQUENCY TA = +85°C Pin = –10 dBm VCC = 4.5 V VCC = 5.0 V VCC = 5.5 V Divide by 256 mode +20 +10 –10 –20 –30 –40 –50 –60100 1000 4000 f in - Input Frequency - MHz Pin - Input Power - dBm INPUT POWER vs. INPUT FREQUENCY +20 +10 –10 –20 –30 –40 –50 –60100 1000 4000 f in - Input Frequency - MHz Pin - Input Power - dBm INPUT POWER vs. INPUT FREQUENCY 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2100 1000 4000 f in - Input Frequency - MHz Vout - Output Voltage - VP-P OUTPUT VOLTAGE vs. INPUT FREQUENCY 100 1000 4000 fin - Input Frequency - MHz Vout - Output Voltage - VP-P OUTPUT VOLTAGE vs. INPUT FREQUENCY TA = +25°C TA = +25°C Pin = –10 dBm TA = –40°C Pin = –10 dBm VCC = 4.5 to 5.5 V VCC = 4.5 to 5.5 V VCC = 4.5 to 5.5 V TA = –40°C TA = –40 °C TA = +25°C TA = +25°C TA = +85°C TA = +85°C VCC = 4.5 V VCC = 5.0 V VCC = 5.5 V VCC = 4.5 V VCC = 5.0 V VCC = 5.5 V Guaranteed Operating Window Guaranteed Operating Window

PP PPPB1506GV, PP PPPB1507GV 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2100 1000 4000 f in - Input Frequency - MHz Vout - Output Voltage - VP-P OUTPUT VOLTAGE vs. INPUT FREQUENCY TA = +85°C Pin = –10 dBm VCC = 4.5 V VCC = 5.0 V VCC = 5.5 V PP PPPB1506GV S11 vs. INPUT FREQUENCY VCC = 5.0 V S11 Z REF 1.0 Units 200.0 mUnits/ 33.881 Ω –52.875 Ω START STOP

0.500000000 GHz

3.000000000 GHz

2.0 GHz

C D : 500 MHz : 1000 MHz : 2000 MHz : 3000 MHz FREQUENCY S11 MHz MAG ANG 500.0000 .868 –26.6 600.0000 .828 –32.6 700.0000 .794 –37.4 800.0000 .761 –41.9 900.0000 .721 –46.5 1000.0000 .706 –49.3 1100.0000 .662 –54.0 1200.0000 .629 –57.2 1300.0000 .595 –60.2 1400.0000 .554 –62.9 1500.0000 .516 –64.8 1600.0000 .440 –61.9 1700.0000 .428 –51.0 1800.0000 .543 –61.5 1900.0000 .555 –68.4 2000.0000 .560 –74.7 2100.0000 .558 –79.5 2200.0000 .564 –84.9 2300.0000 .570 –90.9 2400.0000 .574 –98.3 2500.0000 .574 –107.9 2600.0000 .564 –118.3 2700.0000 .530 –131.4 2800.0000 .476 –144.6 2900.0000 .411 –159.1 3000.0000 .331 –175.8

PP PPPB1506GV, PP PPPB1507GV PP PPPB1506GV S22 vs. OUTPUT FREQUENCY Divide by 64 mode, VCC = 5.0 V S22 Z REF 1.0 Units 200.0 mUnits/ 171.22 Ω –04.438 Ω START STOP

0.045000000 GHz

0.100000000 GHz

45.0 MHz

C D : 45 MHz : 100 MHz PP PPPB1506GV S22 vs. OUTPUT FREQUENCY Divide by 128 mode, VCC = 5.0 V S22 REF 1.0 Units 200.0 mUnits/ 192.34 Ω 03.109 Ω Z START STOP C D : 45 MHz : 100 MHz FREQUENCY S22 MHz MAG ANG 45.000 .542 –1.4 50.000 .602 –.3 55.000 .616 0.0 60.000 .605 1.1 65.000 .609 .7 70.000 .616 .3 75.000 .620 .1 80.000 .622 0.0 85.000 .619 .6 90.000 .610 .9 95.000 .626 –.7 100.000 .623 –1.7 FREQUENCY S MHz MAG ANG 45.000 .590 .4 50.000 .604 –1.0 55.000 .610 –1.1 60.000 .607 –.8 65.000 .548 –5.9 70.000 .630 –0.0 75.000 .615 –1.0 80.000 .618 –1.4 85.000 .617 –1.2 90.000 .616 –2.2 95.000 .623 –2.4 100.000 .624 –2.3

PP PPPB1506GV, PP PPPB1507GV PP PPPB1506GV S22 vs. OUTPUT FREQUENCY Divide by 256 mode, VCC = 5.0 V S22 REF 1.0 Units 200.0 mUnits/ 199.25 Ω –05.992 Ω Z START STOP C D : 45 MHz : 100 MHz PP PPPB1507GV S11 vs. INPUT FREQUENCY VCC = 5.0 V S11 REF 1.0 Units 200.0 mUnits/ 38.111 Ω 0.9707 Ω Z START STOP

3.0 GHz

C D : 500 MHz : 1000 MHz : 2000 MHz : 3000 MHz FREQUENCY S22 MHz MAG ANG 45.000 .601 –.9 50.000 .609 –1.6 55.000 .611 –1.5 60.000 .620 –1.4 65.000 .607 –2.1 70.000 .615 –1.9 75.000 .613 –3.2 80.000 .611 –2.8 85.000 .607 –2.5 90.000 .605 –2.4 95.000 .610 –3.0 100.000 .608 –2.8 FREQUENCY S MHz MAG ANG 500.0000 .857 –27.5 600.0000 .849 –32.0 700.0000 .800 –38.9 800.0000 .764 –43.8 900.0000 .725 –49.0 1000.0000 .665 –50.9 1100.0000 .619 –55.3 1200.0000 .573 –59.3 1300.0000 .531 –61.3 1400.0000 .484 –62.8 1500.0000 .439 –63.0 1600.0000 .377 –59.1 1700.0000 .340 –54.1 1800.0000 .377 –54.7 1900.0000 .441 –59.5 2000.0000 .464 –67.2 2100.0000 .443 –67.4 2200.0000 .466 –74.5 2300.0000 .465 –81.3 2400.0000 .454 –89.4 2500.0000 .433 –99.2 2600.0000 .383 –109.6 2700.0000 .350 –114.0 2800.0000 .332 –124.2 2900.0000 .271 –141.2 3000.0000 .185 –163.6

PP PPPB1506GV, PP PPPB1507GV PP PPPB1507GV S22 vs. OUTPUT FREQUENCY Divide by 64 mode, VCC = 5.0 V S22 REF 1.0 Units 200.0 mUnits/ 185.13 Ω 17.789 Ω Z START STOP C D : 45 MHz : 100 MHz PP PPPB1507GV S22 vs. OUTPUT FREQUENCY Divide by 128 mode, VCC = 5.0 V S22 REF 1.0 Units 200.0 mUnits/ 185.02 Ω 18.953 Ω Z START STOP C D : 45 MHz : 100 MHz FREQUENCY S22 MHz MAG ANG 45.000 .580 3.4 50.000 .572 2.5 55.000 .574 3.0 60.000 .574 2.7 65.000 .584 3.0 70.000 .587 2.6 75.000 .592 2.4 80.000 .587 2.6 85.000 .589 2.9 90.000 .591 2.9 95.000 .573 1.7 100.000 .604 2.9 FREQUENCY S MHz MAG ANG 45.000 .578 3.2 50.000 .571 2.8 55.000 .572 3.3 60.000 .576 3.0 65.000 .584 3.1 70.000 .587 2.8 75.000 .589 2.4 80.000 .589 2.8 85.000 .588 3.0 90.000 .593 2.8 95.000 .598 3.0 100.000 .602 2.9

PP PPPB1506GV, PP PPPB1507GV PP PPPB1507GV S22 vs. OUTPUT FREQUENCY Divide by 256 mode, VCC = 5.0 V S22 REF 1.0 Units 200.0 mUnits/ 186.76 Ω 17.82 Ω Z START STOP C D : 45 MHz : 100 MHz FREQUENCY S22 MHz MAG ANG 45.000 .580 3.0 50.000 .572 2.8 55.000 .571 2.9 60.000 .576 2.9 65.000 .585 3.2 70.000 .590 2.8 75.000 .589 2.5 80.000 .590 2.6 85.000 .588 2.9 90.000 .597 2.9 95.000 .600 3.1 100.000 .601 3.1

PP PPPB1506GV, PP PPPB1507GV TEST CIRCUIT PP PPPB1506GV C7 Stray cap. 50 Ω IN VCCSW1 OUT IN NC SW2 GND VCC = +5.0 V ±10 % S.G OPEN 1 MΩ 0.6 pF Oscilloscope Monitor 50 Ω or Counter x SG (HP-8665A) Divide ratio setting x Counter (HP5350B) : To measure input sensitivity or Oscilloscope : To measure output voltage swing COMPONENT LIST PPB1506GV PPB1507GV C1 to C5 1 000 pF 1 000 pF C6 10 000 pF 10 000 pF Stray cap. Aprox 4 pF Aprox 5 pF C7 3.5 pF* 2.5 pF* * Capacitance CL = 8 pF for DUT includes C7 value + stray capacitance on the board and measurement equipment. SW2 HL SW1 H 1/64 1/128 L 1/128 1/256 H: Connect to VCC L: Connect to GND or OPEN

PP PPPB1506GV, PP PPPB1507GV TEST CIRCUIT PP PPPB1507GV C1 C4 C7 Stray cap. 50 Ω IN VCC SW1 OUT IN NC SW2 GND 1 MΩ 0.6 pF Oscilloscope Monitor VCC = +5.0 V ±10% S.G OPEN 50 Ω or Counter x SG (HP-8665A) Divide ratio setting x Counter (HP5350B) : To measure input sensitivity or Oscilloscope : To measure output voltage swing SW2 HL SW1 H 1/64 1/128 L 1/128 1/256 H: Connect to VCC L: Connect to GND or OPEN

PP PPPB1506GV, PP PPPB1507GV ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD PP PPPB1506GV C5C2 IN OUT PB1506/08/09GV SW1 VCC OUT SW2 OPEN IN µ PP PPPB1507GV VCC SW2 PB1507GVOUT IN C6C1 SW1 IN OUT µ EVALUATION BOARD CHARACTERS (1) 35 Pm thick double-sided copper clad 50 u 50 u 0.4 mm polyimide board (2) Back side: GND pattern (3) Solder plated patterns (4) q : Through holes

PP PPPB1506GV, PP PPPB1507GV PACKAGE DIMENSIONS

8 PIN PLASTIC SSOP (UNIT: mm) (175 mil)

3.0 MAX. 1.5 ±0.1 1.8 MAX. 0.1±0.1 0.575 MAX. 0.65 0.3 +0.10 –0.05 0.10 M 0.15 0.15 +0.10 –0.05 0.5 ±0.2 3.2 ±0.1 4.94 ±0.2 0.87 ±0.2 +7˚ –3˚ detail of lead end

PP PPPB1506GV, PP PPPB1507GV NOTE CORRECT USE (1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as wide as possible to minimize ground impedance (to prevent undesired operation). (3) Keep the wiring length of the ground pins as short as possible. (4) Connect a bypass capacitor (e.g. 10 000 pF) to the V CC pin. RECOMMENDED SOLDERING CONDITIONS This product should be soldered in the following recommended conditions. Other soldering methods and conditions than the recommended conditions are to be consulted with our sales representatives. PP PPPB1506GV, PP PPPB1507GV Soldering method Soldering conditions Recommended condition symbol Infrared ray reflow Package peak temperature: 235 qC, Hour: within 30 s. (more than 210 qC), Time: 3 times, Limited days: no.* IR35-00-3 Hour: within 40 s. (more than 200 qC), Time: 3 times, Limited days: no.* VP15-00-3 Wave soldering Soldering tub temperature: less than 260 qC, Hour: within 10 s., Time: 1 time, Limited days: no. WS60-00-1 Pin part heating Pin area temperature: less than 300 qC, Hour: within 3 s./pin, Limited days: no.* * It is the storage days after opening a dry pack, the storage conditions are 25 qC, less than 65 % RH. Caution The combined use of soldering method is to be avoided (However, except the pin area heating method). For details of recommended soldering conditions for surface mounting, refer to information document SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).

PP PPPB1506GV, PP PPPB1507GV [MEMO]

PP PPPB1506GV, PP PPPB1507GV ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product. M4 96. 5