UPA502T NEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

MOS FIELD EFFECT TRANSISTOR µPA502T PACKAGE DIMENSIONS (in millimeters) 2.8 ±0.2 1.5 0.95 1.9 2.9 ±0.2 0.8 1.1 to 1.4 0 to 0.1 0.16+0.1 –0.06 0.65+0.1 –0.15 0.32+0.1 –0.05 0.95 PIN CONNECTION (Top view) The µPA502T is a mini-mold device provided with two MOS FET circuits. It achieves high-density mounting and saves mounting costs.

FEATURES

  • Two source common MOS FET circuits in package the same size as SC-59
  • Complement to µPA503T
  • Automatic mounting supported Document No. G11238EJ1V0DS00 (1st edition) Date Published June 1996 P Printed in Japan N-CHANNEL MOS FET (5-PIN 2 CIRCUITS) ABSOLUTE MAXIMUM RATINGS (T A = 25 ˚C) PARAMETER SYMBOL RATINGS UNIT Drain to Source Voltage V DSS 50 V Gate to Source Voltage V GSS ±20 V Drain Current (DC) I D(DC) 100 mA Drain Current (pulse) I D(pulse)* 200 mA Total Power Dissipation P T 300 (TOTAL) mW Channel Temperature T ch 150 ˚C Storage Temperature T stg –55 to 150 ˚C * PW ≤ 10 ms, Duty Cycle ≤ 50 %

µPA502T ELECTRICAL CHARACTERISTICS (T A = 25 ˚C) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Drain Cut-off Current I DSS VDS = 50 V, VGS = 0 1.0 µA Gate Leakage Current I GSS VGS = ±20 V, VDS = 0 ±1.0 µA Forward Transfer Admittance |y fs|V DS = 5.0 V, ID = 10 mA 20 mS Drain to Source On-State Resistance RDS(on)1 VGS = 4.0 V, ID = 10 mA 19 30 Ω Drain to Source On-State Resistance RDS(on)2 VGS = 10 V, ID = 10 mA 15 25 Ω Input Capacitance C iss VDS = 5.0 V, VGS = 0, f = 1.0 MHz 16 pF Output Capacitance C oss 12 PF Reverse Transfer Capacitance C rss 3p F Turn-On Delay Time t d(on)VGS(on) = 5.0 V, RG = 10 Ω 17 ns Rise Time t r VDD = 5.0 V, ID = 10 mA 10 ns Turn-Off Delay Time t d(off) R L = 500 Ω 68 ns Fall Time t f 38 ns Marking: DA SWITCHING TIME MEASUREMENT CIRCUIT AND MEASUREMENT CONDITIONS (RESISTANCE LOADED) R G PG. DUT VGS τ = 1 sµ τ Duty Cycle ≤ 1 % R L VDD Gate Voltage Waveform Drain Current Waveform V GS ID 10 % 10 % td(on) td(off) ton toff tr tf 10 % 90 % 90 % 90 % ID VGS(on)

µPA502T TYPICAL CHARACTERISTICS (T A = 25 ˚C) dT - Derating factor - % DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA 100 TC - Case Temperature - ˚C 20 40 80 100 140 160 PT - Total Power Dissipation - mW TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE Free air 300 250 200 150 100 TA - Ambient Temperature - ˚C 25 50 75 100 125 150 350 Per one unit TOTAL 60 120 DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE 120 100 0 1234567 VDS - Drain to Source Voltage - V ID - Drain Current - mA 3.5 V 4.0 V 3.0 V VGS = 2.5 V Pulsed measurement TRANSFER CHARACTERISTICS 1000 100 02 46 8 VGS - Gate to Source Voltage - V ID - Drain Current - mA 0.1 VDS = 5 V Pulsed measurement GATE TO SOURCE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE –30 0 30 60 90 120 150 Tch - Channel Temperature - ˚C VGS(off) - Gate Cut-off Voltage - V VDS = 5 V ID = 1.0 Aµ FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT 100 1 10 100 1000 I D - Drain Current - mA |yfs| - Forward Transfer Admittance - mS VDS = 5 V 25 ˚C TA = 75 ˚C –25 ˚C TA = 75 ˚C 25 ˚C –25 ˚C

µPA502T DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 1000 500 100 10 50 500 1000 ID - Drain Current - mA R DS(on) - Drain to Source On-State Resistance - Ω 100 VGS = 10 V Pulsed measurement TA = 75 ˚C 25 ˚C –25 ˚C DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 100 1 5 50 100 V GS - Gate to Source Voltage - V R DS(on) - Drain to Source On-State Resistance - Ω ID = 10 mA Pulsed measurement DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE –30 0 30 60 90 120 150 T ch - Channel Temperature - ˚C R DS(on) - Drain to Source On-State Resistance - Ω CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 100 0.1 1 10 100 VDS - Drain to Source Voltage - V C iss, Coss, Crss - Capacitance - pF 0.1 VGS = 10 V Pulsed measurement SWITCHING CHARACTERISTICS 100 10 20 50 100 ID - Drain Current - mA td(on), tr, td(off), tf - Switching Time - ns td(off) tf tr td(on) VDD = 5 V VGS = 5 V R G = 10 Ω SOURCE TO DRAIN DIODE FORWARD VOLTAGE 100 0.6 VSD - Source to Drain Voltage - V ID - Drain Current - mA 0.1 VGS = 0 f = 1 MHz C iss C oss C rss

µPA502T REFERENCE Document Name Document No. NEC semiconductor device reliability/quality control system TEI-1202 Quality grade on NEC semiconductor devices IEI-1209 Semiconductor device mounting technology manual C10535E Guide to quality assurance for semiconductor devices MEI-1202 Semiconductor selection guide X10679E

µPA502T No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: “Standard“, “Special“, and “Specific“. The Specific quality grade applies only to devices developed based on a customer designated “quality assurance program“ for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard : Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special : Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific : Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices in “Standard“ unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact NEC Sales Representative in advance. Anti-radioactive design is not implemented in this product. M4 94.11