UPA2706TP

UPA2706TP NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. MOS FIELD EFFECT TRANSISTOR µ PA2706TP SWITCHING N-CHANNEL POWER MOS FET DATA SHEET Document No. G16621EJ1V0DS00 (1st edition) Date Published January 2004 NS CP(K) Printed in Japan 2003

DESCRIPTION

The µ PA2706TP, which has a heat spreader, is N-channel MOS Field Effect Transistor designed for DC/DC converter and power management application of notebook computer.

FEATURES

• Low on-state resistance R DS(on)1 = 15 mΩ MAX. (VGS = 10 V, ID = 5.5 A) R DS(on)2 = 22.5 mΩ MAX. (VGS = 4.5 V, ID = 5.5 A)
• Low Ciss: Ciss = 660 pF TYP. (VDS = 10 V, VGS = 0 V)
• Small and surface mount package (Power HSOP8) ABSOLUTE MAXIMUM RATINGS (TA = 25°C, Unless otherwise noted, all terminals are connected.) Drain to Source Voltage (VGS = 0 V) V DSS 30 V Gate to Source Voltage (VDS = 0 V) V GSS ±20 V Drain Current (DC) (TC = 25°C) I D(DC)1 ±20 A Drain Current (DC) Note1 ID(DC)2 ±11 A Drain Current (pulse) Note2 ID(pulse) ±44 A Total Power Dissipation (TC = 25°C) PT1 15 W Total Power Dissipation Note1 PT2 3 W Channel Temperature T ch 150 °C Storage Temperature T stg −55 to +150 °C Single Avalanche Current Note3 IAS 11 A Single Avalanche Energy Note3 EAS 12.1 mJ Notes 1. Mounted on glass epoxy board of 1 inch x 1 inch x 0.8 mm, PW = 10 sec 2. PW ≤ 10 µs, Duty Cycle ≤ 1% 3. Starting Tch = 25°C, VDD = 15 V, RG = 25 Ω, L = 100 µH, VGS = 20 → 0 V Caution Strong electric field, when exposed to this device, can cause destruction of the gate oxide and ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred.

ORDERING INFORMATION

µ PA2706TP Power HSOP8

Data Sheet G16621EJ1V0DS 2 µ PA2706TP ELECTRICAL CHARACTERISTICS (TA = 25°C, All terminals are connected.) CHARACTERISTICS SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Zero Gate Voltage Drain Current I DSS V DS = 30 V, VGS = 0 V 10 µA Gate Leakage Current I GSS V GS = ±20 V, VDS = 0 V ±10 µA Gate Cut-off Voltage Note VGS(off) V DS = 10 V, ID = 1 mA 1.5 2.5 V Forward Transfer Admittance | y fs | V DS = 10 V, ID = 5.5 A 4.5 S Drain to Source On-state Resistance Note RDS(on)1 V GS = 10 V, ID = 5.5 A 11 15 m Ω R DS(on)2 V GS = 4.5 V, ID = 5.5 A 16 22.5 m Ω R DS(on)3 V GS = 4.0 V, ID = 5.5 A 19 29 m Ω Input Capacitance C iss V DS = 10 V 660 pF Output Capacitance C oss V GS = 0 V 270 pF Reverse Transfer Capacitance C rss f = 1 MHz 83 pF Turn-on Delay Time t d(on) V DD = 15 V, ID = 5.5 A 9 ns Rise Time t r V GS = 10 V 5 ns Turn-off Delay Time t d(off) R G = 10 Ω 29 ns Fall Time t f 6 ns Total Gate Charge Q G V DD = 15 V 7.1 nC Gate to Source Charge Q GS V GS = 5.0 V 2.1 nC Gate to Drain Charge Q GD I D = 11 A 3.1 nC Body Diode Forward Voltage Note VF(S-D) I F = 11 A, VGS = 0 V 0.84 V Reverse Recovery Time t rr I F = 11 A, VGS = 0 V 25 ns Reverse Recovery Charge Q rr di/dt = 100 A/ µs 17 nC Note Pulsed TEST CIRCUIT 3 GATE CHARGE VGS = 20 → 0 V PG. RG = 25 Ω 50 Ω D.U.T. L VDD TEST CIRCUIT 1 AVALANCHE CAPABILITY PG. D.U.T. RL VDD TEST CIRCUIT 2 SWITCHING TIME RG PG. IG = 2 mA 50 Ω D.U.T. RL VDD ID VDD IAS VDS BVDSS Starting Tch VGS τ = 1 s Duty Cycle ≤ 1% τ VGS Wave Form VDS Wave Form VGS VDS 10%0 90% 90% 90% VGS VDS ton toff td(on) tr td(off) tf 10% 10% µ

Data Sheet G16621EJ1V0DS 3 µ PA2706TP TYPICAL CHARACTERISTICS (TA = 25°C) DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA TOTAL POWER DISSIPATION vs. CASE TEMPERATURE dT - Percentage of Rated Power - % 100 120 0 25 50 75 100 125 150 175 TC - Case Temperature - °C P T - Total Power Dissipation - W 0 25 50 75 100 125 150 175 TC - Case Temperature - °C FORWARD BIAS SAFE OPERATING AREA I D - Drain Current - A 0.01 0.1 100 0.01 0.1 1 10 100 ID(pulse) 10 ms Power Dissipation Limited ID(DC) PW = 100 µs 1 msDC RDS(on) Limited (at VGS = 10 V) TC = 25°C Single pulse VDS - Drain to Source Voltage - V TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH r th(t) - Transient Thermal Resistance - °C/W 0.1 100 1000 Rth(ch-A): Mounted on glass epoxy board of 1 inch x 1 inch x 0.8 mm, TA = 25°C Rth(ch-C): TC = 25°C Rth(ch-A) Rth(ch-C) = 8.33°C/W PW - Pulse Width - s 100 µ 1 m 10 m 100 m 1 10 100 1000

Data Sheet G16621EJ1V0DS 4 µ PA2706TP DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE FORWARD TRANSFER CHARACTERISTICS I D - Drain Current - A 00 . 511 . 52 4.0 V PulsedVGS = 10 V 4.5 V VDS - Drain to Source Voltage - V I D - Drain Current - A 0.01 0.1 100 012345 VDS = 10 V Pulsed TA = −55°C 25°C 75°C 150°C V GS - Gate to Source Voltage - V GATE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT V GS(off) - Gate Cut-off Voltage - V 0.5 1.5 2.5 -50 0 50 100 150 VDS = 10 V ID = 1 mA Tch - Channel Temperature - °C | y fs | - Forward Transfer Admittance - S 0.1 100 0.01 0.1 1 10 100 VDS = 10 V Pulsed TA = −55°C 25°C 75°C 150°C ID - Drain Current - A DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE RDS(on) - Drain to Source On-state Resistance - mΩ 0.1 1 10 100 4.5 V Pulsed 10 V VGS = 4.0 V ID - Drain Current - A RDS(on) - Drain to Source On-state Resistance - mΩ 0 5 10 15 20 Pulsed ID = 5.5 A VGS - Gate to Source Voltage - V

Data Sheet G16621EJ1V0DS 5 µ PA2706TP DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE RDS(on) - Drain to Source On-state Resistance - mΩ -50 0 50 100 150 10 V 4.5 V VGS = 4.0 V Pulsed Tch - Channel Temperature - °C C iss, Coss, Crss - Capacitance - pF 100 1000 0.01 0.1 1 10 100 VGS = 0 V f = 1 MHz Ciss Crss Coss VDS - Drain to Source Voltage - V SWITCHING CHARACTERISTICS DYNAMIC INPUT/OUTPUT CHARACTERISTICS t d(on), tr, td(off), tf - Switching Time - ns 100 1000 0.1 1 10 100 VDD = 15 V VGS = 10 V RG = 10 Ω tr tf td(off) td(on) ID - Drain Current - A V DS - Drain to Source Voltage - V 02468 ID = 11 A VDS VGS VDD = 24 V 15 V 6 V Q G - Gate Charge - nC V GS - Gate to Source Voltage - V SOURCE TO DRAIN DIODE FORWARD VOLTAGE REVERSE RECOVERY TIME vs. DIODE FORWARD CURRENT I F - Diode Forward Current - A 0.01 0.1 100

0 VVGS = 10 V

VF(S-D) - Source to Drain Voltage - V t rr - Reverse Recovery Time - ns 100 1000 1 10 100 VGS = 0 V di/dt = 100 A/µs IF - Diode Forward Current - A

Data Sheet G16621EJ1V0DS 6 µ PA2706TP SINGLE AVALANCHE CURRENT vs. INDUCTIVE LOAD SINGLE AVALANCHE ENERGY DERATING FACTOR I AS - Single Avalanche Current - A 100 0.00001 0.0001 0.001 0.01 VDD = 15 V RG = 25 Ω VGS = 20 → 0 V Starting Tch = 25°C EAS = 12.1 mJ L - Inductive Load - H Energy Derating Factor - % 0 100 120 25 50 75 100 125 150 VDD = 15 V RG = 25 Ω VGS = 20 → 0 V IAS ≤ 11 A Starting Tch - Starting Channel Temperature - °C PACKAGE DRAWING (Unit: mm) Power HSOP8 1.27 TYP. 0.12 M 6.0 ±0.3 1.49 ±0.21 2.0 ±0.2 4.4 ±0.150.8 ±0.2 0.40 +0.10 –0.05 5.2+0.17 –0.2 0.05 ±0.05 1.44 TYP. 1.1 ±0.2 0.15 +0.10 –0.05 1, 2, 3 : Source 4 : Gate 5, 6, 7, 8, 9: Drain 4.1 MAX. 2.9 MAX. S0.10 S EQUIVALENT CIRCUIT Source Body Diode Gate Protection Diode Gate Drain Remark The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is externally required if a voltage exceeding the rated voltage may be applied to this device.

µ PA2706TP The information in this document is current as of January, 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1