UPA2701TP

UPA2701TP NEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. © 2002 MOS FIELD EFFECT TRANSISTOR µµµµ PA2701TP SWITCHING N-CHANNEL POWER MOS FET DATA SHEET Document No. G15844EJ2V0DS00 (2nd edition) Date Published May 2002 NS CP(K) Printed in Japan The mark # shows major revised points.

DESCRIPTION

The µPA2701TP, which has a heat spreader, is N-Channel MOS Field Effect Transistor designed for DC/DC converter and power management applications of notebook computers.

FEATURES

• Low on-state resistance RDS(on)1 = 7.5 mΩ MAX. (VGS = 10 V, ID = 7.0 A) RDS(on)2 = 11.6 mΩ MAX. (VGS = 4.5 V, ID = 7.0 A)
• Low Ciss: Ciss = 1200 pF TYP. (VDS = 10 V, VGS = 0 V)
• Small and surface mount package (Power HSOP8)

ORDERING INFORMATION

µPA2701TP Power HSOP8 ABSOLUTE MAXIMUM RATINGS (TA = 25°C, Unless otherwise noted, All terminals are connected.) Drain to Source Voltage (VGS = 0 V) V DSS 30 V Gate to Source Voltage (VDS = 0 V) V GSS ±20 V Drain Current (DC) (TC = 25°C) I D(DC)1 ±35 A Drain Current (DC) (TA = 25°C) Note1 ID(DC)2 ±16 A Drain Current (pulse) Note2 ID(pulse) ±80 A Total Power Dissipation (TC = 25°C) P T1 28 W Total Power Dissipation (TA = 25°C) Note1 PT2 3W Channel Temperature T ch 150 °C Storage Temperature T stg –55 to +150 °C Single Avalanche Current Note3 IAS 18 A Single Avalanche Energy Note3 EAS 32.4 mJ Notes 1. Mounted on a glass epoxy board (1 inch x 1 inch x 0.8 mm), PW = 10 sec 2. PW ≤ 10 µs, Duty Cycle ≤ 1% 3. Starting Tch = 25°C, VDD = 15 V, RG = 25 Ω , L = 100 µH, VGS = 20 → 0 V Remark The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is extemally required if a voltage exceeding the rated voltage may be applied to this device. PACKAGE DRAWING (Unit: mm) 1.27 TYP. 0.12 M 6.0 ±0.3 2.0 ±0.2 4.4 ±0.15 0.40 +0.17 –0.2 +0.10 –0.05 0.05 ±0.05 1.49 ±0.21 1.1 ±0.2 1.44 TYP. 0.8 ±0.2 0.15+0.10 –0.05 5.2 0.10 4.1 MAX. 2.9 MAX. 1, 2, 3 ; Source 4 ; Gate 5, 6, 7, 8, 9 ; Drain S S EQUIVALENT CIRCUIT Source Body Diode Gate Protection Diode Gate Drain

µµµµPA2701TP ELECTRICAL CHARACTERISTICS (TA = 25°C, Unless otherwise noted, All terminals are connected.) CHARACTERISTICS SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Zero Gate Voltage Drain Current I DSS VDS = 30 V, VGS = 0 V 10 µA Gate Leakage Current I GSS VGS = ±20 V, VDS = 0 V ±10 µA Gate Cut-off Voltage V GS(off) VDS = 10 V, ID = 1 mA 1.5 2.0 2.5 V Forward Transfer Admittance | y fs |V DS = 10 V, ID = 7.0 A 7 14 S Drain to Source On-state Resistance R DS(on)1 VGS = 10 V, ID = 7.0 A 6.2 7.5 m Ω RDS(on)2 VGS = 4.5 V, ID = 7.0 A 8.7 11.6 m Ω RDS(on)3 VGS = 4.0 V, ID = 7.0 A 10.3 13.7 m Ω Input Capacitance C iss VDS = 10 V 1200 pF Output Capacitance C oss VGS = 0 V 500 pF Reverse Transfer Capacitance C rss f = 1 MHz 160 pF Turn-on Delay Time t d(on) VDD = 15 V, ID = 7.0 A 10 ns Rise Time t r VGS = 10 V 13 ns Turn-off Delay Time t d(off) RG = 10 Ω 44 ns Fall Time t f 11 ns Total Gate Charge Q G VDD = 15 V 12 nC Gate to Source Charge Q GS VGS = 5 V 4n C Gate to Drain Charge Q GD ID = 14 A 6 nC Body Diode Forward Voltage V F(S-D) IF = 14 A, VGS = 0 V 0.8 1.2 V Reverse Recovery Time t rr IF = 14 A, VGS = 0 V 32 ns Reverse Recovery Charge Q rr di/dt = 100 A/ µs2 7 n C TEST CIRCUIT 3 GATE CHARGE VGS = −20 → 0 V PG. R G = 25 Ω 50 Ω D.U.T. L VDD TEST CIRCUIT 1 AVALANCHE CAPABILITY PG. D.U.T. R L VDD TEST CIRCUIT 2 SWITCHING TIME R G PG. IG = 2 mA 50 Ω D.U.T. R L VDD ID VDD IAS VDS BV DSS Starting Tch VGS = 1 s Duty Cycle ≤ 1% τ µ τ VGS Wave Form VDS Wave Form VGS VDS 10%0 90% 90% 90% VGS VDS ton toff td(on) tr td(off) tf 10% 10%

Data Sheet G15844EJ2V0DS 3 µµµµPA2701TP TYPICAL CHARACTERISTICS (TA = 25°C) DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA TC - Case Temperature - ˚C dT - Percentage of Rated Power - % 04 0 20 60 100 140 80 120 160 100 TC - Case Temperature - ˚C PT - Total Power Dissipation - W 08 0 20 40 60 100 140 120 160 TOTAL POWER DISSIPATION vs. CASE TEMPERATURE FORWARD BIAS SAFE OPERATING AREA VDS - Drain to Source Voltage - V ID - Drain Current - A 0.01 1000 100 0.1 0.1 1 10 TC = 25˚C Single Pulse 100 ID(pulse) = 80 A ID(DC) = 35 A RDS(on) Limited (at V GS = 10 V) PW = 1 ms 10 ms 100 ms Power Dissipation Limited PW - Pulse Width - s TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH rth(t) - Transient Thermal Resistance - ˚C/W 1000 100 0.1 0.1 1 10 100 10000.0001 0.001 0.01 R th(ch-A) = 89.3˚C/W R th(ch-C) = 4.46˚C/W Single Pulse R th(ch-A): Mounted on a glass epoxy board (1 inch x 1 inch x 0.8 mm), TA = 25˚C R th(ch-C): TC = 25˚C Remark

µµµµPA2701TP FORWARD TRANSFER CHARACTERISTICS VGS - Gate to Source Voltage - V ID - Drain Current - A Pulsed 12345 0.1 0.01 100 VDS = 10 V TA = −25˚C 25˚C 75˚C 150˚C DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE VDS - Drain to Source Voltage - V ID - Drain Current - A 0.2 0.3 0.40.10 VGS = 10 V 4.5 V 4.0 V Pulsed FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT ID - Drain Current - A | yfs | - Forward Transfer Admittance - S 0.01 0.1 1 100 10 100 0.1 Pulsed VDS = 10 V TA = 150˚C 75˚C 25˚C −25˚C DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE VGS - Gate to Source Voltage - V R DS(on) - Drain to Source On-state Resistance - mΩ 408 1 22 6 10 14 16 20 18 Pulsed ID = 7.0 A DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT ID - Drain Current - A R DS(on) - Drain to Source On-state Resistance - mΩ 10.01 0.1 10 100 Pulsed VGS = 4.0 V 4.5 V 10 V GATE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE Tch - Channel Temperature - ˚C VGS(off) - Gate Cut-off Voltage - V VDS = 10 V ID = 1 mA −50 0 50 100 150−25 25 75 125

Data Sheet G15844EJ2V0DS 5 µµµµPA2701TP DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE Tch - Channel Temperature - ˚C R DS(on) - Drain to Source On-state Resistance - mΩ −50 −25 0 50 100 15025 75 125 175 Pulsed 4.5 V 10 V VGS = 4 V SOURCE TO DRAIN DIODE FORWARD VOLTAGE 1.0 ISD - Diode Forward Current - A 0 1.2 VSD - Source to Drain Voltage - V 0.2 0.4 0.6 0.8 Pulsed 0.01 0.1 100 VGS = 0 V VDS - Drain to Source Voltage - V C iss, Coss, Crss - Capacitance - pF 100 1000 10000 0.1 1 10 100 VGS = 0 V f = 1 MHz CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE C rss C oss C iss SWITCHING CHARACTERISTICS ID - Drain Current - A td(on), tr, td(off), tf - Switching Time - ns 10.1 100 10 100 VDD = 15 V VGS = 10 V R G = 10 Ω tf tr td(on) td(off) REVERSE RECOVERY TIME vs. DRAIN CURRENT IF - Drain Current - A trr - Reverse Recovery Time - ns di/dt = 100 A/ s VGS = 0 V 0.1 1 10 100 1000 100 µ DYNAMIC INPUT/OUTPUT CHARACTERISTICS VGS - Gate to Source Voltage - V Q G - Gate Charge - nC VDS - Drain to Source Voltage - V 1641 2 2 061 421 0 1 8 I D = 14 A VDD = 24 V 15 V 6 V VDS VGS

µµµµPA2701TP [MEMO]

Data Sheet G15844EJ2V0DS 7 µµµµPA2701TP [MEMO]

µµµµPA2701TP M8E 00. 4 The information in this document is current as of May, 2002. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard":Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).