UPA1523B RENESAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 10
Technical content
To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry.
- All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing th e information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. Renesas Electronics products ar e classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: Computers; office equipmen t; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti- crime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics pr oducts described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesa s Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesa s Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority- owned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
© 1996 DATA SHEET COMPOUND FIELD EFFECT POWER TRANSISTOR µPA1523B Document No. G11331EJ1V0DS00 Date Published May 1996 P Printed in Japan The information in this document is subject to change without notice. P-CHANNEL POWER MOS FET ARRAY SWITCHING INDUSTRIAL USE
DESCRIPTION
The µPA1523B is P-channel Power MOS FET Array that built in 4 circuits designed for solenoid, motor and lamp driver.
FEATURES
- Full Mold Package with 4 Circuits
- –4 V driving is possible
- Low On-state Resistance R DS(on)1 = 0.8 Ω MAX. (@V GS = –10 V, ID = –1 A) R DS(on)2 = 1.3 Ω MAX. (@V GS = –4 V, ID = –1 A)
- Low Input Capacitance Ciss = 190 pF TYP.
ORDERING INFORMATION
µPA1523BH 10 Pin SIP ABSOLUTE MAXIMUM RATINGS (T A = 25 ˚C) Drain to Source Voltage (VGS = 0) VDSS –60 V Gate to Source Voltage (VDS = 0) VGSS(AC) 20 V Drain Current (DC) I D(DC) 2.0 A/unit Drain Current (pulse) I D(pulse) *1 8.0 A/unit Total Power Dissipation P T1 *2 28 W Total Power Dissipation P T2 *3 3.5 W Channel Temperature T CH 150 ˚C Storage Temperature T stg –55 to + 150 ˚C Single Avalanche Current I AS *4 –2.0 A Single Avalanche Energy E AS *4 0.4 mJ *1 PW ≤ 10 µs, Duty Cycle ≤ 1% *2 4 Circuits, TC = 25 ˚C *3 4 Circuits, TA = 25 ˚C *4 Starting TCH = 25 ˚C, VDD = –30 V, VGS = –20 V → 0, RG = 25 Ω , L = 100 µH Build-in Gate Diodes are for protection from static electricity in handing. In case high voltage over VGSS is applied, please append gate protection circuits. 26.8 MAX. 2.5 1.40.6 ± 0.1 2.54 4.0 10 MIN. 1.4 0.5 ± 0.1 123456789 1 0 PACKAGE DIMENSIONS in millimeters CONNECTION DIAGRAM ELECTRODE CONNECTION 2, 4, 6, 8 3, 5, 7, 9 1, 10 : Gate : Drain : Source
µPA1523B ELECTRICAL CHARACTERISTICS (T A = 25 ˚C) CHARACTERISTIC SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Drain Leakage Current I DSS VDS = –60 V, VGS = 0 –10 µA Gate Leakage Current I GSS VGS = 20 V, VDS = 0 10 µA Gate Cutoff Voltage V GS(off) VDS = –10 V, ID = –1.0 mA –1.0 –2.0 V Forward Transfer Admittance | Y fs |V DS = –10 V, ID = –1.0 A 0.8 S Drain to Source ON-Resistance RDS(on)1 VGS = –10 V, ID = –1.0 A 0.5 0.8 Ω Drain to Source ON-Resistance RDS(on)2 VGS = –4.0 V, ID = –1.0 A 0.8 1.3 Ω Input Capacitance C iss VDS = –10 V, VGS = 0, f = 1.0 MHz 190 pF Output Capacitance C oss 115 pF Reverse Transfer Capacitance C rss 43 pF Turn-on Delay Time t d(on) ID = –1.0 A, VGS(on) = –10 V, 8 ns Rise Time t r VDD = –30 V, RL = 30 Ω 53 ns Turn-off Delay Time t d(off) 400 ns Fall Time t f 230 ns Total Gate Charge Q G VGS = –10 V, ID = –2.0 A, VDD = –48 V 10 nC Gate to Source Charge Q GS 1.1 nC Gate to Drain Charge Q GD 3.5 nC Body Diode Forward Voltage V F(S-D) IF = 2.0 A, VGS = 0 1.0 V Reverse Recovery Time t rr IF = 2.0 A, VGS = 0, di/dt = 50 A/µs 180 ns Reverse Recovery Charge Q rr 250 nC . . ± ±
µPA1523B Test Circuit 1 Avalanche Capability PG. VGS = –20 V → 0 R G = 25 Ω 50 Ω D.U.T. L VDD VDD ID IAS BV DSS VDS Starting TCH Test Circuit 2 Switching Time PG. R G R G = 10 Ω D.U.T. R L VDD t t = 1 s Duty cycle ≤ 1 % µ VGS VGS ID (—) VGS Wave Form I D Wave Form 0 10 % 90 %VGS(on) ID 0 10 % 90 % 10 % 90 % td(on) tr ton td(off) tf toff Test Circuit 3 Gate Charge PG. IG = 2 mA 50 Ω D.U.T. R L VDD
µPA1523B TYPICAL CHARACTERISTICS (T A = 25 ˚C) FORWARD BIAS SAFE OPERATING AREA VDS - Drain to Source Voltage - V ID - Drain Current - A –0.1 –0.1 –1.0 –10 –100 –1.0 –10 –100 TC = 25 ˚C Single Pulse TA - Ambient Temperature - ˚C PT - Total Power Dissipation - W 0 50 100 150 3.0 2.0 1.0 TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE 0.5 1.5 2.5 TC - Case Temperature - ˚C PT - Total Power Dissipation - W 0 100 150 TOTAL POWER DISSIPATION vs. CASE TEMPERATURE
4 Circuits operation
2 Circuits operation
3 Circuits operation
1 Circuit operation
RDS(on) Limited(V GS = –10 V) DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA T C - Case Temperature - ˚C dT - Percentage of Rated Power - % 0 20 40 60 80 100 120 140 160 100 DC ID(Pulse) 3.5 Under Same dissipation in each circuit Tc is grease Temperature on back surface ID(DC) Pw = 100 s 1 ms10 ms 500 s FORWARD TRANSFER CHARACTERISTICS VGS - Gate to Source Voltage - V ID - Drain Current - A –0.01 –0.1 –10 0 –4 –8 Pulsed VDS = –10 V DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE VDS - Drain to Source Voltage - V ID - Drain Current - A 0 –4 –6–2 Pulsed VGS = – 10 V VGS = –4 V Power Dissipation Limited –2 –6 –10 TA=125 ˚C 75 ˚C 25 ˚C –25 ˚C /,/, NEC PA1523BHµ µµ Lead Print Circuit Boad Under Same dissipation in each circuit
µPA1523B TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH PW - Pulse Width - s rth(t) - Transient Thermal Resistance - ˚C/W 1 000 100 10010 m1 m100 µ 1 10 1 000 FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT ID - Drain Current - A –0.01 –0.1 100 –1.0 –10 0.1 | yfs | - Forward Transfer Admittance - S DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE V GS - Gate to Source Voltage - V R DS(on) - Drain to Source On-State Resistance - Ω 0 –10 0.5 –20 Pulsed 1.0 1.5 ID = –2 A –1 A –0.4 A DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT ID - Drain Current - A R DS(on) - Drain to Source On-State Resistance - mΩ –10–0.10 1 000 1 500 GATE TO SOURCE CUTOFF VOLTAGE vs. CHANNEL TEMPERATURE T CH - Channel Temperature - ˚C VGS(off) - Gate to Source Cutoff Voltage - V –50 0 50 100 150 –2 VDS = –10 V ID = –1 mA 0.1 1.0 100 m Single Pulse R th(CH-A) 4ircuits 3ircuits 2ircuits 1ircuit R th(CH-C) 1.0 TA = –25 ˚C 25 ˚C 75 ˚C 125 ˚C VDS = –10 V Pulsed –1.0 500 Pulsed VGS = –4 V VGS = –10 V
µPA1523B VGS - Gate to Source Voltage - V DYNAMIC INPUT/OUTPUT CHARACTERISTICS Q G - Gate Charge - nC VDS - Drain to Source Voltage - V 04 2608 1 2 10 –20 –40 –60 –80 –10 –12 –14 –16 VGS VDS VDD = –12 V –30 V –48 V ID = –2 A CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE V DS - Drain to Source Voltage - V C iss, Coss, Crss - Capacitance - pF –0.1 100 1 000 10 000 –1 –10 –100 VGS = 0 f = 1 MHz C iss C oss C rss DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE T CH - Channel Temperature - ˚C R DS(on) - Drain to Source On-State Resistance - mΩ –50 0 50 100 150 1600 1200 800 400 VGS = –4 V VGS = –10 V ID = –1 A SOURCE TO DRAIN DIODE FORWARD VOLTAGE VSD - Source to Drain Voltage - V ISD - Diode Forward Current - A0.1 1.0 SWITCHING CHARACTERISTICS ID - Drain Current - A td(on), tr, td(off), tf - Switching Time - ns 1.0 100 1 000 –0.01 –1.0 –10 VDD = –30 V VGS = –10 V R G = 10 Ω REVERSE RECOVERY TIME vs. DRAIN CURRENT I D - Drain Current - A trr - Reverse Recovery time - ns 100 1 000 –0.1 –1.0 –10 di/dt = 50A/ s VGS = 0 µ –0.1 td(off) tr tf td(on) 1.0 2.0 Pulsed VGS = –2 V VGS =0
µPA1523B SINGLE AVALANCHE CURRENT vs. INDUCTIVE LOAD L - Inductive Load - H IAS - Single Avalanche Current - A –0.1 –1.0 –10 –0.1 100 1 m10 µµ 10 m IAS = –2 A SINGLE AVALANCHE ENERGY DERATING FACTOR Starting TCH - Starting Channel Temperature - ˚C Energy Derating Factor - % 50 75 100 125 150 100 EAS = 0.4 mJ VDD = –30 V R G = 25 Ω VGS = –20 V → 0 IAS ≤ 1.0 A VDD = –30 V VGS = –20 V → 0 R G = 25 Ω Starting TCH = 25 ˚C REFERENCE Document Name Document No. NEC semiconductor for device reliability/quality control system TEI-1202 Quality grade on NEC semiconductor devices IEI-1209 Semiconductor device mounting technology manual C10535E Semiconductor device package manual C10943X Guide to quality assurance for semiconductor devices MEI-1202 Semiconductor selection guide X10679E Power MOS FET features and application switching power supply TEA-1034 Application circuits using Power MOS FET TEA-1035 Safe operating area of Power MOS FET TEA-1037
µPA1523B No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: “Standard“, “Special“, and “Specific“. The Specific quality grade applies only to devices developed based on a customer designated “quality assurance program“ for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices in “Standard“ unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact NEC Sales Representative in advance. Anti-radioactive design is not implemented in this product. M4 94.11 [MEMO]