UPA

UPA NICHICON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100M UPA Miniature Sized, Low lmpedance, High Reliability For Switching Power Supplies Lower impedance than UPW. Smaller case size and high ripple current. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Dimension table in next page. UPA Low Impedance UPW 15min. 4min. d Configuration φD Pb-free leadwire Pb-free PET sleeve 8 10 12.5 to 18 PD HD Sleeve (PET) Pressure relief vent φD+ 0.5max. (L < 20) 1.5 (L 20) 2.0 P±0.5 φD P φd 3.5 0.6 5.0 0.6 12.5 5.0 0.6 7.5 0.8 7.5 0.8 (mm) U P A A M P D 1 1 12 Size code Configuration Series name Type Capacitance tolerance ( ±20%) Rated capacitance (470µF) Rated voltage (10V)L ± Radial Lead Type Type numbering system (Example : 10V 470µF) 50Hz 120Hz 300Hz 1kHz 10kHz or more 0.75 0.80 0.90 0.85 0.90 0.95 Cap. (µF) Frequency 1.00 1.00 1.00 Frequency coefficient of rated ripple current 180 to 330 390 to 1000 1200 to 10000 0.65 0.75 0.85 0.55 0.70 0.80 Specifications Performance Characteristicsltem Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current ※ Tangent of loss angle (tan δ) Stability at Low Temperature Endurance Marking –55 to +105˚C 6.3 to 35V 180 to 10000µF ± 20% at 120Hz, 20˚C After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) Rated voltage (V) tan δ (max.) For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Printed with white color letter on dark brown sleeve. Impedance ratio (max.) Z(–55˚C) / Z(+20˚C) Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The specifications listed below shall be met when the capacitors are restored to 20 ˚C after D.C. bias plus rated ripple current is applied at 105 ˚C for the condition listed at right.The peak voltage shall not exceed the rated voltage. Rated Voltage φD(mm) φ8 φ10 >= φ12.5 6.3〜35V 3000hrs. 4000hrs. 5000hrs. Capacitance change Leakage current tan δ Within ± 20% of the initial capacitance value(6.3V, 10V : ± 30%) Less than or equal to the initial specified value 200% or less than the initial specified value(6.3V, 10V : 300%) Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. ※ I : Leakage Current(µA), C : Rated Capacitance(µF), V : Rated Voltage(V) 6.3 10 16 25 35 3 3 3 3 3 6.3 10 16 25 35 120Hz 20˚C 120Hz

ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100M UPA Rated Voltage （V） （code） Rated Capacitance （µF） Case Size φD×L （mm） tan δ Leakage Current （µA） Impedance （Ω） max. Rated Ripple （mArms） （105℃/100kHz） Part Number at 20℃ after 1 minute ） 20℃/ 100kHz －10℃/ 100kHz 6.3 （0J） 1000 8×15 0.22 189 0.062 0.124 860 UPA0J102MPD 1000 10×12.5 0.22 189 0.063 0.126 900 UPA0J102MPD6 1200 10×16 0.22 226.8 0.049 0.098 1240 UPA0J122MPD3 1500 8×20 0.22 283.5 0.044 0.088 1220 UPA0J152MPD 1500 10×16 0.22 283.5 0.049 0.098 1240 UPA0J152MPD6 1500 10×20 0.22 283.5 0.035 0.070 1490 UPA0J152MPD3 2200 10×20 0.24 415.8 0.035 0.070 1490 UPA0J222MPD 2200 10×25 0.24 415.8 0.033 0.066 1680 UPA0J222MPD3 2700 10×25 0.24 510.3 0.033 0.066 1680 UPA0J272MPD 5600 16×20 0.30 1058.4 0.026 0.052 2330 UPA0J562MHD6 8200 16×25 0.36 1549.8 0.019 0.038 2760 UPA0J822MHD 8200 18×20 0.36 1549.8 0.025 0.050 2640 UPA0J822MHD6 10000 16×30.5 0.40 1890 0.017 0.034 2810 UPA0J103MHD 10000 18×25 0.40 1890 0.018 0.036 2850 UPA0J103MHD6 （1A） 470 8×11.5 0.19 141 0.090 0.18 630 UPA1A471MPD 560 8×11.5 0.19 168 0.090 0.18 630 UPA1A561MPD 820 8×15 0.19 246 0.062 0.124 860 UPA1A821MPD 820 10×12.5 0.19 246 0.063 0.126 900 UPA1A821MPD6 1000 8×20 0.19 300 0.044 0.088 1220 UPA1A102MPD 1000 10×12.5 0.19 300 0.063 0.126 900 UPA1A102MPD6 1000 10×16 0.19 300 0.049 0.098 1240 UPA1A102MPD3 1200 8×20 0.19 360 0.044 0.088 1220 UPA1A122MPD 1200 10×16 0.19 360 0.049 0.098 1240 UPA1A122MPD6 1500 10×20 0.19 450 0.035 0.070 1490 UPA1A152MPD 1800 10×20 0.19 540 0.035 0.070 1490 UPA1A182MPD 1800 10×25 0.19 540 0.033 0.066 1680 UPA1A182MPD6 2200 10×25 0.21 660 0.033 0.066 1680 UPA1A222MPD 2200 12.5×20 0.21 660 0.029 0.058 1890 UPA1A222MHD3 2700 12.5×20 0.21 810 0.029 0.058 1890 UPA1A272MHD 3300 12.5×25 0.23 990 0.022 0.044 2280 UPA1A332MHD 3900 12.5×25 0.23 1170 0.022 0.044 2280 UPA1A392MHD 4700 16×20 0.25 1410 0.026 0.052 2330 UPA1A472MHD6 6800 16×25 0.29 2040 0.019 0.038 2760 UPA1A682MHD 8200 16×30.5 0.33 2460 0.017 0.034 2810 UPA1A822MHD 8200 18×25 0.33 2460 0.018 0.036 2850 UPA1A822MHD6 ■ Dimensions For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code “1” and then add the appropriate code.

ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100M UPA Rated Voltage （V） （code） Rated Capacitance （µF） Case Size φD×L （mm） tan δ Leakage Current （µA） Impedance （Ω） max. Rated Ripple （mArms） （105℃/100kHz） Part Number at 20℃ after 1 minute ） 20℃/ 100kHz －10℃/ 100kHz （1C） 680 8×15 0.16 326.4 0.062 0.124 860 UPA1C681MPD 820 8×20 0.16 393.6 0.044 0.088 1220 UPA1C821MPD 820 10×16 0.16 393.6 0.049 0.098 1240 UPA1C821MPD6 1000 10×16 0.16 480 0.049 0.098 1240 UPA1C102MPD 1000 10×20 0.16 480 0.035 0.070 1490 UPA1C102MPD3 1200 10×20 0.16 576 0.035 0.070 1490 UPA1C122MPD 1500 10×25 0.16 720 0.033 0.066 1680 UPA1C152MPD 2200 12.5×20 0.18 1056 0.029 0.058 1890 UPA1C222MHD 2200 12.5×25 0.18 1056 0.022 0.044 2280 UPA1C222MHD3 2700 12.5×25 0.18 1296 0.022 0.044 2280 UPA1C272MHD 3300 16×20 0.20 1584 0.026 0.052 2330 UPA1C332MHD6 4700 16×25 0.22 2256 0.019 0.038 2760 UPA1C472MHD 4700 18×20 0.22 2256 0.025 0.050 2640 UPA1C472MHD6 5600 16×30.5 0.24 2688 0.017 0.035 2810 UPA1C562MHD 5600 18×25 0.24 2688 0.018 0.036 2850 UPA1C562MHD6 6800 18×25 0.26 3264 0.018 0.036 2850 UPA1C682MHD （1E） 390 8×15 0.14 292.5 0.062 0.124 860 UPA1E391MPD 470 8×15 0.14 352.5 0.062 0.124 860 UPA1E471MPD 560 8×20 0.14 420 0.044 0.088 1220 UPA1E561MPD 560 10×16 0.14 420 0.049 0.098 1240 UPA1E561MPD6 680 10×16 0.14 510 0.049 0.098 1240 UPA1E681MPD 820 10×20 0.14 615 0.035 0.070 1490 UPA1E821MPD 1000 10×25 0.14 750 0.033 0.066 1680 UPA1E102MPD 1000 12.5×20 0.14 750 0.029 0.058 1890 UPA1E102MHD3 1200 12.5×20 0.14 900 0.029 0.058 1890 UPA1E122MHD 1800 12.5×25 0.14 1350 0.022 0.044 2280 UPA1E182MHD 2200 16×20 0.16 1650 0.026 0.052 2330 UPA1E222MHD6 3300 16×25 0.18 2475 0.019 0.038 2760 UPA1E332MHD 3300 18×20 0.18 2475 0.025 0.050 2640 UPA1E332MHD6 4700 18×25 0.20 3525 0.018 0.036 2850 UPA1E472MHD ■ Dimensions For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code “1” and then add the appropriate code.

ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100M Rated Voltage （V） （code） Rated Capacitance （µF） Case Size φD×L （mm） tan δ Leakage Current （µA） Impedance （Ω） max. Rated Ripple （mArms） （105℃/100kHz） Part Number at 20℃ after 1 minute ） 20℃/ 100kHz －10℃/ 100kHz （1V） 180 8×11.5 0.12 189 0.090 0.18 630 UPA1V181MPD 270 8×15 0.12 283.5 0.062 0.124 860 UPA1V271MPD 390 8×20 0.12 409.5 0.044 0.088 1220 UPA1V391MPD 390 10×16 0.12 409.5 0.049 0.098 1240 UPA1V391MPD6 560 10×20 0.12 588 0.035 0.070 1490 UPA1V561MPD 680 10×25 0.12 714 0.033 0.066 1680 UPA1V681MPD 820 12.5×20 0.12 861 0.029 0.058 1890 UPA1V821MHD 1000 12.5×20 0.12 1050 0.029 0.058 1890 UPA1V102MHD 1200 12.5×25 0.12 1260 0.022 0.044 2280 UPA1V122MHD 1500 16×20 0.12 1575 0.026 0.052 2330 UPA1V152MHD6 1800 16×20 0.12 1890 0.026 0.052 2330 UPA1V182MHD6 2200 16×25 0.14 2310 0.019 0.038 2760 UPA1V222MHD 2200 18×20 0.14 2310 0.025 0.050 2640 UPA1V222MHD6 2700 16×30.5 0.14 2835 0.017 0.035 2810 UPA1V272MHD 2700 18×25 0.14 2835 0.018 0.036 2850 UPA1V272MHD6 3300 18×30.5 0.16 3465 0.016 0.032 2910 UPA1V332MHD UPA ■ Dimensions For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors.