UN0402E-0603E UNSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
www.unsemi.com.tw Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/5 MULTILAYER CHIP VARISTORS Application Dimensions Lead free type SMD type zinc oxide based ceramic chip Insulator over coat keeps excellent low and stable leakage current Plating termination provided good solderability characteristic Wide operating voltage range, VDC: 5.5V to 18V Quick response time (<1ns) Low clamping voltage High transient current capability Meet IEC 61000-4-2 standard Low capacitance can meet high speed single transient voltage protection. Low capacitance product applications for high-speed signal lines such as HDMI, DVI, USB, IEEE1394 Port etc. Normal capacitance product applications for I/O Port (RS232, USB, PS2, VGA, Audio) on Mother Board and Notebook, Set-Top Box, MP3 Players, DVD Players, and Docking System etc. Unit: mm UN0402E-0603E Series L CC W T Lead Free Over Coating Metal Oxide Layer Inner Electrode 100% Ag Layer 100% Ni Barrier Layer 100% Sn Plated Layer 1005(0402) 1.00±0.15 0.50±0.10 0.50±0.10 0.25±0.15 1608(0603) 1.60±0.20 0.80±0.20 0.80±0.20 0.30±0.20 Model L W T C
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS MULTILAYER CHIP VARISTORS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Electrical Characteristics @ 25℃ Unless Otherwise Specified ) UN0402E-0603E Series UN0402 UN0603 5.5 5.5 5.5 110* 1.0 3.0 5.0 10.0 12.0 22.0 5.0 330 46-60 22-34 22-34 22-34 22-34 22-34 7.6-12 7.6~12 11~17 7.6~12 <10 <10 <10 <10 <10 <1.0 <10 <10 <10 <10 Part Number UN0402E18V010P UN0402E18V030P UN0402E18V050P UN0402E18V100P UN0402E18V120P UN0402E18V220P UN0402E5.5V050P UN0402E5.5V331P UN0402E09V100P UN0402E5.5V100P NOTE: VDC - Maximum DC operating voltage the varistor can maintain and not exceed 10μA leakage current. VV - Voltage across the device measured at 1mA DC current Equivalent to VB, “break down voltage.” VC - Maximum peak current across the varistor with 8/20μs waveform and 1A pulse current. *: Maximum peak current across the varistor with 8/20μs waveform and 0.5A pulse current. Cp - Device capacitance measured with zero volt bias 1Vrms at 1MHz Working Voltage VDC V(Max) µA(Max) V(Max) Varistor Voltage Leakage Current Clamping Voltage Typical capacitance V VV IL VC CP PF 5.5 5.5 110* 1.0 3.0 5.0 10.0 12.0 22.0 330 5.0 46-60 22-34 22-34 22-34 22-34 22-34 7.6-12 7.6~12 7.6~12 <10 <10 <10 <10 <10 <1.0 <10 <10 <10 UN0603E18V010P UN0603E18V030P UN0603E18V050P UN0603E18V100P UN0603E18V120P UN0603E18V220P UN0603E18V331P UN0603E5.5V050P UN0603E5.5V100P
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS MULTILAYER CHIP VARISTORS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. General Technical Data Environmental Performance Package TAPE AND REEL SPECIFIC ATIONS Item Specifications Test Condition 90%RH, 40℃ , Working Voltage, 1000 hrs -40℃ to 85℃ , 30 min. cycle, 5 cycles Working Voltage, 85℃ , 1000 hrs ¶VV / VV10μA Bias Humidity Thermal Shock Full Load Voltage Size EIA (EIAJ) 0402 (1005) 0603 (1608) 4,00010,000Standard Packing Quantity (pcs / reel) UN0402E-0603E Series Operating Temperature Storage Temperature (on board) Response Time Solderability Solder Leach Resistance -40~+85℃ -40~+125℃ <1ns 2455℃, 31sec. 2605℃đ101sec. feeding direction No Component No Component Component P AO BO PO D1 E W F D KO200mm 400mm PLASTIC CARRIER
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS MULTILAYER CHIP VARISTORS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.4/5 ROHS TAPE AND REEL SPECIFIC ATIONS TAPING DIMENSIONS Unit: mm UN0402E-0603E Series PAPER CARRIER T P AO BO PO E WFD Symbol W P E F D P010 K0(T) t 453215 PLASTIC 12 ± 0.1 8.0 ± 0.1 1.75 ± 0.1 5.5 ± 0.05 1.55 ± 0.05 1.5~1.75 4.0 ± 0.1 40 ± 0.2 2.0 ± 0.05 3.66 ± 0.1 4.95 ± 0.1 1.83 ± 0.1 0.23 ± 0.1 451616 PLASTIC 11.7~12.3 4.0 ± 0.1 1.75 ± 0.1 5.5 ± 0.05 1.55 ± 0.05 1.5~1.75 4.0 ± 0.1 40 ± 0.2 2.0 ± 0.05 1.83 ± 0.1 4.85 ± 0.1 1.83 ± 0.1 0.29 ± 0.1 322513 PLASTIC 7.7~8.3 4.0 ± 0.1 1.75 ± 0.1 3.5 ± 0.05 1.55 ± 0.05 0.95~1.20 4.0 ± 0.1 40 ± 0.2 2.0 ± 0.05 2.57 ± 0.1 3.4 ± 0.1 1.32 ± 0.1 0.25 ± 0.1 321611 PLAST 7.9~8.3 4.0 ± 0.1 1.75 ± 0.1 3.5 ± 0.05 1.55 ± 0.05 0.95~1.20 4.0 ± 0.1 40 ± 0.2 2.0 ± 0.05 1.85 ± 0.1 3.43 ± 0.1 1.22 ± 0.1 0.25 ± 0.1 201212 PLASTIC 7.9~8.3 4.0 ± 0.1 1.75 ± 0.1 3.5 ± 0.05 1.50 ± 0.05 0.95~1.20 4.0 ± 0.1 40 ± 0.2 2.0 ± 0.05 1.42 ± 0.1 2.26 ± 0.1 1.30 ± 0.1 0.23 ± 0.1 201209 PLASTIC 7.9~8.3 4.0 ± 0.1 1.75 ± 0.1 3.5 ± 0.05 1.50 ± 0.10 1.0~1.25 4.0 ± 0.1 40 ± 0.2 2.0 ± 0.05 1.42 ± 0.1 2.24 ± 0.1 1.04 ± 0.10 0.25 ± 0.1 201209 PAPER 8.0 ± 0.1 4.0 ± 0.1 1.75 ± 0.1 3.5 ± 0.1 1.56 ± 0.10 NA 4.0 ± 0.1 40 ± 0.2 2.0 ± 0.1 1.50 ± 0.05 2.30 ± 0.05 0.95 ± 0.05 NA 160808 PAPER 8.0 ± 0.1 4.0 ± 0.1 1.75 ± 0.10 3.5 ± 0.1 1.56 ± 0.10 NA 4.0 ± 0.1 NA 2.0 ± 0.1 1.05 ± 0.05 1.85 ± 0.05 0.95 ± 0.05 NA 100505 PAPER 8.0 ± 0.1 2.0 ± 0.05 1.75 ± 0.05 3.5 ± 0.05 1.55 ± 0.05 NA 4.0 ± 0.1 NA 2.0 ± 0.05 0.62 ± 0.03 1.12 ± 0.03 0.60 ± 0.03 NA
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.5/5 REEL DIMENSIONS ROHS UN0402E-0603E Series The Contents of a boxğ 4532(1812): 4 reels / inner box ; 4516(1806): 4 reels / inner box ; 3225(1210): 5 reels / inner box ; 3216(1206): 5 reels / inner box ; 2012(0805): 5 reels / inner box ; 1608(0603): 5 reels / inner box ; 1005(0402): 5 reels / inner box . 7” REEL 10,000 4,000 4,000 3,000 3,000 2,000 2,000 1,000Qty. (pcs) Reel Packaging Quantity PART SIZE (EIA SIZE) 1005 (0402) 1608 (0603) 201209 (0805) 201212 (0805) 321611 (1206) 3225 (1210) 4516 (1806) 4532 (1812) +0.25 12.75 0 +0.5 11 0 +1.5 8.4 0 2.5±0.5 2.5±0.5 ∅180±1∅65±0.5
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.