UMW1H330MDD

UMW NICHICON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 2

Technical content

ALUMINUM ELECTROLYTIC CAPACITORS P.412 CAT.8100J UMW 5mmL, For General Audio Equipment Acoustic series, with 5mm height. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Specifications Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ ) Stability at Low Temperature Endurance Shelf Life Marking Performance CharacteristicsItem –40 to +85°C 4 to 50V 1 to 470µF ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Printed with black color letter on gold sleeve. Measurement frequency : 120Hz Capacitance change Leakage current The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C. After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. tan δ Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Rated voltage (V) tan δ(MAX.) 0.35 6.3 0.24 0.20 0.16 0.14 Z–25°C / Z+20°C Z–40°C / Z+20°C Rated voltage (V) Impedance ratio (MAX.) 6.3 UMW 0.12 0.10 Measurement frequency : 120Hz at 20°C U M W E M D D Configuration Capacitance tolerance (±20%) Rated capacitance (10µF) Rated voltage (25V) Series name Type φD P φd 1.5 0.45 2.0 0.45 6.3 2.5 0.45 2.5 0.45 P±0.5 L+1MAX. 15MIN 4MIN φD+0.5 MAX. Sleeve (P.E.T.) φ d (mm) φ D 4 to 8 Pb-free leadwire Pb-free PET sleeve DD Configuration Radial Lead Type Type numbering system (Example : 25V 10 µF) U M W E M D D Configuration Capacitance tolerance (±20%) Rated capacitance (10µF) Rated voltage (25V) Series name Type φD P φd 1.5 0.45 2.0 0.45 6.3 2.5 0.45 2.5 0.45 P±0.5 L+1MAX. 15MIN 4MIN φD+0.5 MAX. Sleeve (P.E.T.) φ d (mm) φ D 4 to 8 Pb-free leadwire Pb-free PET sleeve DD Configuration Frequency coefficient of rated ripple current Coefficient Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more USW Smaller Dimension table in next page. ALUMINUM ELECTROLYTIC CAPACITORS P.413 CAT.8100J UMW Rated Voltage （V） （code） Rated Capacitance （µF） Case Size φD×L （mm） tan δ Leakage Current （µA） Rated Ripple （mArms） （85℃/120Hz） Part Number at 20℃ after 2 minutes ） （0G） 33 4×5 0.35 3 28 UMW0G330MDD 47 4×5 0.35 3 33 UMW0G470MDD 100 5×5 0.35 4 56 UMW0G101MDD 220 6.3×5 0.35 8.8 96 UMW0G221MDD 330 8×5 0.35 13.2 145 UMW0G331MDD 470 8×5 0.35 18.8 185 UMW0G471MDD 6.3 （0J） 22 4×5 0.24 3 28 UMW0J220MDD 33 5×5 0.24 3 37 UMW0J330MDD 47 5×5 0.24 3 45 UMW0J470MDD 100 6.3×5 0.24 6.3 70 UMW0J101MDD 220 8×5 0.24 13.86 110 UMW0J221MDD 330 8×5 0.24 20.79 170 UMW0J331MDD （1A） 22 5×5 0.20 3 33 UMW1A220MDD 33 5×5 0.20 3.3 41 UMW1A330MDD 47 6.3×5 0.20 4.7 52 UMW1A470MDD 100 8×5 0.20 10 80 UMW1A101MDD 220 8×5 0.20 22 135 UMW1A221MDD （1C） 10 4×5 0.16 3 23 UMW1C100MDD 22 5×5 0.16 3.52 37 UMW1C220MDD 33 6.3×5 0.16 5.28 49 UMW1C330MDD 47 6.3×5 0.16 7.52 58 UMW1C470MDD 100 8×5 0.16 16 92 UMW1C101MDD （1E） 4.7 4×5 0.14 3 16 UMW1E4R7MDD 10 5×5 0.14 3 27 UMW1E100MDD 22 6.3×5 0.14 5.5 42 UMW1E220MDD 33 6.3×5 0.14 8.25 52 UMW1E330MDD 47 8×5 0.14 11.75 70 UMW1E470MDD 100 8×5 0.14 25 110 UMW1E101MDD （1V） 3.3 4×5 0.12 3 15 UMW1V3R3MDD 4.7 4×5 0.12 3 18 UMW1V4R7MDD 10 5×5 0.12 3.5 29 UMW1V100MDD 22 6.3×5 0.12 7.7 46 UMW1V220MDD 33 8×5 0.12 11.55 62 UMW1V330MDD 47 8×5 0.12 16.45 80 UMW1V470MDD （1H） 1 4×5 0.10 3 8.4 UMW1H010MDD 2.2 4×5 0.10 3 13 UMW1H2R2MDD 3.3 4×5 0.10 3 17 UMW1H3R3MDD 4.7 5×5 0.10 3 20 UMW1H4R7MDD 10 6.3×5 0.10 5 33 UMW1H100MDD 22 8×5 0.10 11 52 UMW1H220MDD 33 8×5 0.10 16.5 71 UMW1H330MDD Dimensions Please refer to page 18, 19 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code “1” and then add the appropriate code.

ALUMINUM ELECTROLYTIC CAPACITORS P.412 CAT.8100J UMW 5mmL, For General Audio Equipment Acoustic series, with 5mm height. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Specifications Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ ) Stability at Low Temperature Endurance Shelf Life Marking Performance CharacteristicsItem –40 to +85°C 4 to 50V 1 to 470µF ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Printed with black color letter on gold sleeve. Measurement frequency : 120Hz Capacitance change Leakage current The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C. After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. tan δ Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Rated voltage (V) tan δ(MAX.) 0.35 6.3 0.24 0.20 0.16 0.14 Z–25°C / Z+20°C Z–40°C / Z+20°C Rated voltage (V) Impedance ratio (MAX.) 6.3 UMW 0.12 0.10 Measurement frequency : 120Hz at 20°C U M W E M D D Configuration Capacitance tolerance (±20%) Rated capacitance (10µF) Rated voltage (25V) Series name Type φD P φd 1.5 0.45 2.0 0.45 6.3 2.5 0.45 2.5 0.45 P±0.5 L+1MAX. 15MIN 4MIN φD+0.5 MAX. Sleeve (P.E.T.) φ d (mm) φ D 4 to 8 Pb-free leadwire Pb-free PET sleeve DD Configuration Radial Lead Type Type numbering system (Example : 25V 10 µF) U M W E M D D Configuration Capacitance tolerance (±20%) Rated capacitance (10µF) Rated voltage (25V) Series name Type φD P φd 1.5 0.45 2.0 0.45 6.3 2.5 0.45 2.5 0.45 P±0.5 L+1MAX. 15MIN 4MIN φD+0.5 MAX. Sleeve (P.E.T.) φ d (mm) φ D 4 to 8 Pb-free leadwire Pb-free PET sleeve DD Configuration Frequency coefficient of rated ripple current Coefficient Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more USW Smaller Dimension table in next page. ALUMINUM ELECTROLYTIC CAPACITORS P.413 CAT.8100J UMW Rated Voltage （V） （code） Rated Capacitance （µF） Case Size φD×L （mm） tan δ Leakage Current （µA） Rated Ripple （mArms） （85℃/120Hz） Part Number at 20℃ after 2 minutes ） （0G） 33 4×5 0.35 3 28 UMW0G330MDD 47 4×5 0.35 3 33 UMW0G470MDD 100 5×5 0.35 4 56 UMW0G101MDD 220 6.3×5 0.35 8.8 96 UMW0G221MDD 330 8×5 0.35 13.2 145 UMW0G331MDD 470 8×5 0.35 18.8 185 UMW0G471MDD 6.3 （0J） 22 4×5 0.24 3 28 UMW0J220MDD 33 5×5 0.24 3 37 UMW0J330MDD 47 5×5 0.24 3 45 UMW0J470MDD 100 6.3×5 0.24 6.3 70 UMW0J101MDD 220 8×5 0.24 13.86 110 UMW0J221MDD 330 8×5 0.24 20.79 170 UMW0J331MDD （1A） 22 5×5 0.20 3 33 UMW1A220MDD 33 5×5 0.20 3.3 41 UMW1A330MDD 47 6.3×5 0.20 4.7 52 UMW1A470MDD 100 8×5 0.20 10 80 UMW1A101MDD 220 8×5 0.20 22 135 UMW1A221MDD （1C） 10 4×5 0.16 3 23 UMW1C100MDD 22 5×5 0.16 3.52 37 UMW1C220MDD 33 6.3×5 0.16 5.28 49 UMW1C330MDD 47 6.3×5 0.16 7.52 58 UMW1C470MDD 100 8×5 0.16 16 92 UMW1C101MDD （1E） 4.7 4×5 0.14 3 16 UMW1E4R7MDD 10 5×5 0.14 3 27 UMW1E100MDD 22 6.3×5 0.14 5.5 42 UMW1E220MDD 33 6.3×5 0.14 8.25 52 UMW1E330MDD 47 8×5 0.14 11.75 70 UMW1E470MDD 100 8×5 0.14 25 110 UMW1E101MDD （1V） 3.3 4×5 0.12 3 15 UMW1V3R3MDD 4.7 4×5 0.12 3 18 UMW1V4R7MDD 10 5×5 0.12 3.5 29 UMW1V100MDD 22 6.3×5 0.12 7.7 46 UMW1V220MDD 33 8×5 0.12 11.55 62 UMW1V330MDD 47 8×5 0.12 16.45 80 UMW1V470MDD （1H） 1 4×5 0.10 3 8.4 UMW1H010MDD 2.2 4×5 0.10 3 13 UMW1H2R2MDD 3.3 4×5 0.10 3 17 UMW1H3R3MDD 4.7 5×5 0.10 3 20 UMW1H4R7MDD 10 6.3×5 0.10 5 33 UMW1H100MDD 22 8×5 0.10 11 52 UMW1H220MDD 33 8×5 0.10 16.5 71 UMW1H330MDD Dimensions Please refer to page 18, 19 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code “1” and then add the appropriate code.