UMV1170L WHIRLPOOL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

DETAILED PLANNING DIMENSION W11521615A PRODUCT DIMENSIONS Model# UMV1170L Unit of Measurement in cm Overall width (A) 30 76 Overall height (B) 171∕8 43.5 Height of the door (C) 123∕4 32.3 Depth without door (D) 141∕8 35.9 Depth with door (E) 151∕2 39.3 Depth with door open 90° (F) 393∕8 100 Depth with Bump Out Kit (G) 16 40.6 A BC FRONT VIEW SIDE VIEW Back of Cabinet F E D A D E F G Bump out Kit TOP VIEW WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS and INSTALLATION INSTRUCTIONS, located in your appliance's Owner's Manual, before installing and operating this appliance. Electrical Requirements Model# UMV1170L Amperage Rating 15 - 20 A Operating Voltage 120 V Operating Frequency 60 Hz ELECTRICAL REQUIREMENTS NOTE: A time-delay fuse or dedicated circuit is recommended. Do not use an extension cord.

DETAILED PLANNING DIMENSION 2 of 8 Model# UMV1170L Unit of Measurement in cm Cavity height (J) 91∕2 24.2 Cavity height including highest point of the turntable (K) 99∕16 24.3 Cavity width (L) 211∕8 53.7 Cavity depth (M) 14 35.6 Turntable diameter (N) 12 30.5 MICROWAVE INTERIOR CAVITY DIMENSIONS L K J N CAVITY INTERIOR FRONT VIEW Back of Cabinet M CAVITY INTERIOR SIDE VIEW

DETAILED PLANNING DIMENSION FRONT VIEW OPENING/CLEARANCE DIMENSIONS Model# UMV1170L Opening/Clearance Measurement in cm Minimum width of cabinet opening (A) 30 76.2 Typical height from cooking surface to floor based on 36" countertops (B) 36 91.4 Typical height from top of cabinet to cooking surface based on 36" countertops (C) 30 76.2 Minimum height from floor to top of cabinet opening (B+C=D) (D) 66 167.6 Recommended electrical connection location (E) See below schematic E A C B D LOCATION REQUIREMENTS Support structure must be able to support 150 lb (68 kg) including microwave oven and upper cabinet including contents. Mounting plate must attach to a minimum of one 2" x 4" (5.1 cm x 10.2 cm) wall stud. Mounting distance between a fixed wall on the higed-side of the door and the microwave oven is 1/2" (1.3 cm) VENTING REQUIREMENTS The microwave oven is factory set for recirculating ventilation. To vent through the roof or wall, refer to installation instructions for further information.

DETAILED PLANNING DIMENSION 4 of 8 OPENING/CLEARANCE DIMENSIONS Model# UMV1170L Opening/Clearance Measurement in cm Depth of upper cabinet (minimum - maximum) *(F) 12-15 30.5-38.1 Can this product be installed flush? Flush refers to the appliance not protruding past the cabinet depth. (Y/N) N * This microwave oven is factory set for 12" - 14" depth of upper cabinet, install with the provided mouting plate. For 15" depth of upper cabinet, install with the optional bump out mounting kit W11185746, the bump out mounting kit is not provided, but can be purchased from Whirlpool. Side Cabinet F 12" DEPTH 14" Mounting Plate SIDE VIEW Bump out mounting kit 14" DEPTH 15" Side Cabinet F SIDE VIEW Mounting Plate Bump Out Mounting Plate IMPORTANT: Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information. Refer to the Installation Guide before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation. All Whirlpool® appliances are appropriately UL, CUL or CSA approved.

DIMENSIÓN DE PLANIFICACIÓN EN DETALLE DIMENSIONES DEL PRODUCTO N.° de modelo UMV1170L Unidad de medida pul cm Ancho total (A) 30 76 Altura total (B) 171∕8 43,5 Altura de la puerta (C) 123∕4 32,3 Profundidad sin puerta (D) 141∕8 35,9 Profundidad con puerta (E) 151∕2 39,3 Profundidad con puerta abierta a 90° (F) 393∕8 100 Profundidad sin kit de montaje sobresaliente (G) 16 40,6 A BC VISTA FRONTAL VISTA LATERAL Parte posterior del gabinete F E D A D E F G Kit de montaje sobresaliente VISTA SUPERIOR ADVERTENCIA: A fin de reducir el riesgo de incendio, choque eléctrico o lesiones personales, lea las INSTRUCCIONES IMPORTANTES DE SEGURIDAD Y LAS INSTRUCCIONES DE INSTALACIÓN, que se encuentran en el Manual del propietario, antes de instalar y usar el electrodoméstico. Requisitos eléctricos N.° de modelo UMV1170L Índice de amperaje 15 - 20 A Voltaje de funcionamiento 120 V Frecuencia de funcionamiento 60 Hz REQUISITOS ELÉCTRICOS NOTA: Se recomienda un fusible retardador o un disyuntor dedicado. No use un cable de extensión.

DIMENSIÓN DE PLANIFICACIÓN EN DETALLE 6 de 8 N.° de modelo UMV1170L Unidad de medida pul cm Altura de la cavidad (J) 91∕2 24,2 Altura de la cavidad desde el punto más alto de la bandeja giratoria (K) 99∕16 24,3 Ancho de la cavidad (L) 211∕8 53,7 Profundidad de la cavidad (M) 14 35,6 Diámetro de la bandeja giratoria (N) 12 30,5 DIMENSIONES DE LA CAVIDAD INTERIOR DEL MICROONDAS L K J N VISTA FRONTAL DE LA CAVIDAD INTERIOR Parte posterior del gabinete M VISTA LATERAL DE LA CAVIDAD INTERIOR

DIMENSIÓN DE PLANIFICACIÓN EN DETALLE VISTA FRONTAL MEDIDAS DE ABERTURA/ESPACIO N.° de modelo UMV1170L Medidas de la abertura/espacio pul cm Ancho mínimo de la apertura del gabinete (A) 30 76,2 Altura típica desde la superficie de cocción hasta el piso según mostradores de 36" (B) 36 91,4 Altura típica desde la parte superior del gabinete hasta la superficie de cocción según mostradores de 36" (C) 30 76,2 Altura mínima desde al piso hasta la parte superior de la abertura del gabinete Ubicación recomendada para la conexión eléctrica (E) Consulte el esquema que aparece a continuación E A C B D REQUISITOS DE UBICACIÓN La estructura de soporte debe poder sostener un peso de 150 libras (68 kg) incluido el peso del horno de microondas, el gabinete y sus contenidos. La placa de montaje debe fijarse como mínimo a una viga de pared de 2" x 4" (5,1 cm x 10,2 cm). La distancia de montaje entre una pared fija del lado de la puerta con bisagras y el horno de microondas es de 1/2" (1,3 cm) REQUISITOS DE VENTILACIÓN El horno de microondas está configurado de fábrica en ventilación recirculante. Para obtener más información para instalar la ventilación en la pared o en el techo, consulte las instrucciones de instalación.

DIMENSIÓN DE PLANIFICACIÓN EN DETALLE 8 de 8 MEDIDAS DE ABERTURA/ESPACIO N.° de modelo UMV1170L Medidas de la abertura/espacio pul cm Profundidad del gabinete superior (mín. - máx.)* (F) 12-15 30,5-38,1 ¿Este producto se puede instalar al ras? Al ras significa que el electrodoméstico no sobresale del gabinete. (S/N) N Gabinete lateral F 12" ≤ PROFUNDIDAD ≤ 14" Placa de montaje * Este horno de microondas está configurado de fábrica para un gabinete superior de 12" - 14" de profundidad, instalar con la placa de montaje proporcionada. Para gabinetes superiores de 15" de profundidad, instalar con el kit de montaje sobresaliente opcional W11185746. No se incluye el kit de montaje sobresaliente, pero puede adquirirse en Whirlpool. VISTA LATERAL Kit de montaje sobresaliente 14" ≤ PROFUNDIDAD ≤ 15" Gabinete lateral F VISTA LATERAL Placa de montaje Placa de montaje sobresaliente IMPORTANTE: Las especificaciones de medidas son solo para fines de planificación. No realice ningún corte basado en esta información. Consulte la Guía de instalación antes de la selección de gabinetes, verificar las conexiones eléctricas/de gas, realizar cortes o iniciar la instalación. Todos los electrodomésticos Whirlpool® poseen la homologación UL, CUL o CSA pertinente. ©2021 All rights reserved. Todos los derechos reservados. 04/21W11521615A