UMF0J010MDD NICHICON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
1.5 2.2 3.3 4.7 6.8 100 010 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101 4 × 5 5 × 5 5 × 5 6.3× 5 6.3× 5 6.3 5.0 2.6 2.6 1.3 1.3 115 115 5 × 5 5 × 5 6.3× 5 2.6 2.6 1.3 115 4 × 5 5 × 5 5 × 5 6.3× 5 6.3× 5 5.0 2.6 2.6 1.3 1.3 115 115 4 × 5 4 × 5 5 × 5 6.3× 5 6.3× 5 6.3× 5 5.0 5.0 2.6 1.3 1.3 1.3 115 115 115 4 × 5 4 × 5 4 × 5 4 × 5 4 × 5 5 × 5 5 × 5 6.3× 5 6.3× 5 5.0 5.0 5.0 5.0 5.0 2.6 2.6 1.3 1.3 115 115 P ±0.5 L+1MAX 15 MIN 4 MIN φ D +0.5 MAX φ d φ D P φ d 1.5 0.45 6.3 2.5 0.45 2.0 0.45 Sleeve (P.E.T.) (mm) ALUMINUM ELECTROLYTIC CAPACITORS MFseries 5mmL, Low Impedance Low impedance over wide temperature range of –55 ~ +105°C, with 5mm height. Suited for DC-DC converters where smaller case size and lower impedance are required. Adapted to the RoHS directive (2002/95/EC). Radial Lead Type Dimensions Type numbering system (Example : 25V 10µF) U M F E M D D Configuration Capacitance tolerance (± 20%) Rated capacitance (10µF) Rated voltage (25V) Series name Type φ D 4 ~ 6.3 Pb-free leadwire Pb-free PET sleeve DD Configuration Specifications Category Temperature Range Rated Voltage Range Rated Capacitance Range Rated Capacitance Tolerance Leakage Current tan δ Stability at Low Temperature Endurance Shelf Life Marking Performance CharacteristicsItem –55 ~ +105°C 6.3 ~ 35V 1 ~ 100µF ±20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Printed with white color letter on dark brown sleeve. After 1000 hours' application of rated voltage at 105°C capacitors meet the characteristic requirements listed at right. After storig the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. MF MT Rated voltage (V) tan δ (MAX.) Z–25°C / Z+20°C Z–55°C /Z+20°C Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) 6.3 6.3 0.22 0.20 0.18 0.14 0.12 Max. Impedance (Ω ) at 20°C 100kHz Rated Ripple (mArms) at 105°C 100kHz Case size φ D × L (mm) Impedance Rated ripple Cap.(µF) Code V Low Impedance Measurement frequency : 120Hz Measurement frequency : 120Hz, Temperature : 20°C Leakage current tan δ Capacitance change Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Frequency coefficient of rated ripple current Coefficient Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz ~ CAT.8100V