UMD4N

EMD4 ROHM | Alldatasheet

Document overview

• Manufacturer or author: ROHM CO., LTD.
• PDF pages: 5

Technical content

Rev.B 1/4 General purpose (dual digital transistors) EMD4 / UMD4N zFeatures 1) Both the DTA114Y chip and DTC144E chip in an EMT6 or UMT6 package. 2) Mounting possible with EMT3 or UMT3 automatic mounting machines. 3) Transistor elements are independent, eliminating interference. 4) Mounting cost and area can be cut in half. zStructure A PNP and NPN digital transistor (each with a single built in resistor) The following characteristics apply to both the DTr1 and DTr2, however, the “ −” sign on DTr2 values for the PNP type have been omitted. zEquivalent circuit EMD4 / UMD4N DTr2 DTr1 (3) (2) (1) (4) (5) (6) DTr1 R1/R2=47kΩ / 47kΩ DTr2 R1/R2=10kΩ / 47kΩ zExternal dimensions (Unit : mm) ROHM : EMT6 EMD4 ROHM : UMT6 EIAJ : SC-88 UMD4N Abbreviated symbol :D4 Abbreviated symbol : D4 0.22 1.2 1.6 (1) (2)(5) (3) (6) (4) 0.13 0.5 0.50.5 1.0 1.6 Each lead has same dimensions Each lead has same dimensions 0∼0.1 (6) 2.0 1.30.9 0.15 0.7 0.1Min. 2.1 0.65 0.2 1.25 (1) 0.65 (4) (3) (2) (5) zPackaging specifications Taping Code Basic ordering unit (pieces) Package TR 3000 UMD4N T2R 8000 EMD4 Type

Rev.B 2/4 zAbsolute maximum ratings (Ta = 25°C) Limits DTr1(DTC144E) DTr2(DTA114Y) Parameter Symbol VCC −50 −40 to +6 −70 −100 −10 to +40 100 120(1ELEMENT)150(TOTAL) V V mA mW VIN IO IC(Max.) Pd 150 −55 to +150 Tj Tstg Unit Supply voltage Input voltage Output current Power dissipation Junction temperature Storage temperature zElectrical characteristics (Ta = 25°C) DTr 1 Parameter Symbol VI(off) VI(on) VO(on) II IO(off) GI R2/R1 fT Min. 32.9 0.8 0.1 250 0.5 0.3 0.18 0.5 61.1 1.2 V VCC=5V, IO=100µA VO=0.3V, IO=2mA IO/II=10mA/0.5mA VI=5V VCC=50V, VI=0V VO=5V, IO=5mA VCE=10V, IE=−5mA, f=100MHz ∗ V mA µA kΩ MHz Typ. Max. Unit Conditions Input voltage Output voltage Input current Output current Input resistance DC current gain Resistance ratio Transition frequency ∗ Transition frequency of the device DTr 2 Parameter Symbol VI(off) VI(on) VO(on) II IO(off) GI R2/R1 fT Min. −1.4 3.7 −0.1 4.7 250 −0.3 −0.3 −0.88 −0.5 5.7 V VCC= −5V, IO= −100µA VO= −0.3V, IO= −1mA IO/II= −5mA / −0.25mA VI= −5V VCC= −50V, VI=0V VO= −5V, IO= −5mA VCE= −10V, IE=5mA, f=100MHz ∗ V mA µA kΩ MHz Typ. Max. Unit Conditions Input voltage Output voltage Input current Output current Input resistance DC current gain Resistance ratio Transition frequency ∗ Transition frequency of the device

Rev.B 3/4 zElectrical characteristic curves DTr1 (NPN) VO=0.3V 100µ 200µ 500µ 1m 2m 5m 10m 20m 50m 100m 100 500m 200m 100m INPUT VOLTAGE : VI(on) (V) OUTPUT CURRENT : IO (A) Fig.1 Input voltage vs. output current (ON characteristics) 25°C 100°C Ta=−40°C VCC=5V 10m 500µ 200µ 100µ 50µ 20µ 10µ INPUT VOLTAGE : VI(off) (V) OUTPUT CURRENT : Io (A) Ta=100°C 25°C −40°C Fig.2 Output current vs. input voltage (OFF characteristics) OUTPUT CURRENT : IO (A) DC CURRENT GAIN : GI VO=5V 100µ 200µ 500µ 1m 2m 5m 10m 20m 50m 100m 500 200 100 Fig.3 DC current gain vs. output current Ta=100°C 25°C −40°C 100µ 200µ 500µ 1m 2m 5m 10m 20m 50m 100m 500m 200m 100m 50m 20m 10m lO/lI=20 OUTPUT CURRENT : IO (A) OUTPUT VOLTAGE : VO(on) (V) Fig.4 Output voltage vs. output current Ta=100°C 25°C −40°C DTr2 (NPN) INPUT VOLTAGE : VI(on) (V) OUTPUT CURRENT : IO (A) Fig.5 Input voltage vs. output current (ON characteristics) VO=−0.3V−100 −50 −20 −10 −200m −100m −500m 25°C 100°C Ta=−40°C INPUT VOLTAGE : VI(off) (V) OUTPUT CURRENT : Io (A) Fig.6 Output current vs. input voltage (OFF characteristics) VCC=−5V 0 −3.0 −10m −1µ −2m −5m −1m −200µ −500µ −100µ −20µ −50µ −10µ −2µ −5µ Ta=100°C 25°C −40°C OUTPUT CURRENT : IO (A) DC CURRENT GAIN : GI Fig.7 DC current gain vs. output current VO=−5V1k 500 200 100 Ta=100°C 25°C −40°C

Rev.B 4/4 OUTPUT CURRENT : IO (A) OUTPUT VOLTAGE : VO(on) (V) Fig.8 Output voltage vs. output current lO/lI=20 −500m −200m −100m −10m −50m −5m −20m −2m −1m Ta=100°C 25°C −40°C

Appendix1-Rev1.1 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.