UMD3NFHA ROHM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. EMD3 / UMD3N / IMD3A NPN + PNP Complex Digital Transistors (Bias Resistor Built-in Transistors) <For DTr1(NPN)> lOutline <For DTr2(PNP)> lFeatures lInner circuit 1) Both the DTC114E chip and DTA114E chip i n one package. Built-in bias resistors enable the configuration of an inverter circuit without connecting external i nput resistors (see inner circuit). The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of compl etely eliminating parasitic effects. Only the on/off conditions need to be set for op eration, making the circuit design easy. Lead Free/RoHS Compliant. lApplication Inverter circuit, Interface circuit, Driver circuit lPackaging specifications Parameter Value EMT6 UMT6 VCC 50V IC(MAX.) 100mA R2 10kW R1 10kW Part No. Package Package size (mm) Taping code Reel size (mm) Tape width (mm) Basic ordering unit (pcs) Marking R2 10kW IC(MAX.) -100mA 8,000 D3 UMD3N UMT6 2021 TR 180 8 3,000 D3 EMD3 EMT6 1616 T2R 180 8 3,000 D3IMD3A SMT6 2928 T108 180 8 R1 10kW SMT6 Parameter Value VCC -50V (3) (2) (1) (4) (5) (6) EMD3 (SC-107C) UMD3N SOT-363 (SC-88) IMD3A SOT-457 (SC-74) (1) (2) (3) (6) (5) (4) (1) (2) (3) (6) (5) (4) EMD3 / UMD3N IMD3A OUT (6) (2) IN (1) GND (3) OUT IN (5) GND (4) DTr1 DTr2 OUT (4) (2) IN (3) GND (1) OUT IN (5) GND (6) DTr1 DTr2 R1 R2 R2 R1 1/8 2013.07 - Rev.E EMD3FHA / UMD3NFHA / IMD3AFRA EMD3FHA EMD3FHA / UMD3NFHA UMD3NFHA EMD3FHA UMD3NFHA IMD3AFRA IMD3AFRA IMD3AFRA AEC-Q101 Qualified
www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. Data Sheet EMD3 / UMD3N / IMD3A lAbsolute maximum ratings (Ta = 25C) lElectrical characteristics(Ta = 25°C) <For DTr1(NPN)> lElectrical characteristics(Ta = 25°C) <For DTr2(PNP)> *1 Characteristics of built-in transistor *2 Each terminal mounted on a reference footprint *3 120mW per element must not be exceeded. *4 200mW per element must not be exceeded. Parameter Symbol DTr1(NPN) DTr2(PNP) Unit Supply voltage V CC 50 -50 V Input voltage VIN -10 to +40 -40 to +10 V Output current IO 50 -50 mA Collector current IC(MAX.) *1 100 -100 mA Power dissipation EMD3 / UMD3N PD *2 150 (Total)*3 mW Range of storage temperature Tstg -55 to +150 °C Min. Typ. Max. Unit IMD3A 300 (Total)*4 mW Junction temperature Tj 150 °C 7 10 13 kW 30 - - mA - - 0.5 mA - - 0.88 Min. Typ. Max. Unit - 250 - MHz 0.8 1 1.2 7 10 13 kW 30 - - mA - - -0.5 mA - - -0.88 - 250 - MHz 0.8 1 1.2Resistance ratio R2/R1 - Transition frequency fT *1 VCE = -10V, IE = 5mA f = 100MHz VVI(on) VO = 0.3V, IO = 10mA Output voltage VO(on) IO / II = 10mA / 0.5mA V Input current II VI = 5V - 0.1 0.3 3.0 - - - - 0.5 Input voltage VI(off) VCC = 5V, IO = 100mA fT *1 VCE = 10V, IE = -5mA f = 100MHz Parameter Symbol Conditions Parameter Symbol Conditions Output current IO(off) VCC = 50V, VI = 0V DC current gain GI VO = 5V, IO = 5mA Input resistance R1 - Resistance ratio R2/R1 - Transition frequency VVI(on) VO = -0.3V, IO = -10mA Output voltage VO(on) IO / II = -10mA / -0.5mA V Input current II VI = -5V - -0.1 -0.3 -3.0 - - - - -0.5Input voltage VI(off) VCC = -5V, IO = -100mA Output current IO(off) VCC = -50V, VI = 0V DC current gain GI VO = -5V, IO = -5mA Input resistance R1 - 2/8 2013.07 - Rev.E EMD3FHA / UMD3NFHA / IMD3AFRA EMD3FHA / UMD3NFHA IMD3AFRA
www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. Data Sheet EMD3 / UMD3N / IMD3A lElectrical characteristic curves (Ta = 25°C) <For DTr1(NPN)> Fig.4 DC current gain vs. output current Fig.1 Input voltage vs. output current (ON characteristics) INPUT VOLTAGE : VI(on) [V] OUTPUT CURRENT : IO [A] Fig.2 Output current vs. input voltage (OFF characteristics) OUTPUT CURRENT : IO [A] INPUT VOLTAGE : VI(off)[V] Fig.3 Output current vs. output voltage OUTPUT CURRENT : IO [mA] OUTPUT VOLTAGE : VO [V] DC CURRENT GAIN : GI OUTPUT CURRENT : IO [A] 0 5 10 140mA 160mA 200mA 220mA 240mA 260mA 180mA II= Ta=25ºC 120mA 100mA 3/8 2013.07 - Rev.E EMD3FHA / UMD3NFHA / IMD3AFRA
www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. Data Sheet EMD3 / UMD3N / IMD3A lElectrical characteristic curves (Ta = 25°C) <For DTr1(NPN)> lElectrical characteristic curves (Ta = 25°C) <For DTr2(PNP)> Fig.5 Output voltage vs. output current OUTPUT VOLTAGE : VO(on) [V] OUTPUT CURRENT : IO [A] Fig.6 Input voltage vs. output current (ON characteristics) INPUT VOLTAGE : VI(on) [V] OUTPUT CURRENT : IO [A] Fig.7 Output current vs. input voltage (OFF characteristics) OUTPUT CURRENT : IO [A] INPUT VOLTAGE : VI(off)[V] 4/8 2013.07 - Rev.E EMD3FHA / UMD3NFHA / IMD3AFRA
www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. Data Sheet EMD3 / UMD3N / IMD3A lElectrical characteristic curves (Ta = 25°C) <For DTr2(PNP)> Fig.9 DC current gain vs. output current Fig.8 Output current vs. output voltage OUTPUT CURRENT : IO [mA] OUTPUT VOLTAGE : VO [V] DC CURRENT GAIN : GI OUTPUT CURRENT : IO [A] Fig.10 Output voltage vs. output current OUTPUT VOLTAGE : VO(on) [V] OUTPUT CURRENT : IO [A] -10 -20 -30 -40 -50 0 -5 -10 -100mA -120mA -140mA -160mA -180mA -200mA -220mA -240mA -260mA -280mA -300mA II=Ta=25ºC 5/8 2013.07 - Rev.E EMD3FHA / UMD3NFHA / IMD3AFRA
www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. Data Sheet EMD3 / UMD3N / IMD3A lDimensions (Unit : mm) Dimension in mm / inches EMT6 㼎 㻰 㼑 㻸㼜㻸㼜 㻱 㻴㻱 㻸㻸 㼤 㻿㻭 㻭 㼏 㻭㻝 㻭 㼥 㻿 㻿 㼑㻝 㼎㻞 㼘㻝 㼑 Pattern of terminal position areas [Not a recommended pattern of soldering pads] 㻹㻵㻺 㻹㻭㼄 㻹㻵㻺 㻹㻭㼄 㻭 㻜㻚㻠㻡 㻜㻚㻡㻡 㻜㻚㻜㻝㻤 㻜㻚㻜㻞㻞 㻭㻝 㻜㻚㻜㻜 㻜㻚㻝㻜 㻜㻚㻜㻜㻜 㻜㻚㻜㻜㻠 㼎 㻜㻚㻝㻣 㻜㻚㻞㻣 㻜㻚㻜㻜㻣 㻜㻚㻜㻝㻝 㼏 㻜㻚㻜㻤 㻜㻚㻝㻤 㻜㻚㻜㻜㻟 㻜㻚㻜㻜㻣 㻰 㻝㻚㻡㻜 㻝㻚㻣㻜 㻜㻚㻜㻡㻥 㻜㻚㻜㻢㻣 㻱 㻝㻚㻝㻜 㻝㻚㻟㻜 㻜㻚㻜㻠㻟 㻜㻚㻜㻡㻝 㼑 㻴㻱 㻝㻚㻡㻜 㻝㻚㻣㻜 㻜㻚㻜㻡㻥 㻜㻚㻜㻢㻣 㻸 㻜㻚㻝㻜 㻜㻚㻟㻜 㻜㻚㻜㻜㻠 㻜㻚㻜㻝㻞 㻸㼜 㻙 㻜㻚㻟㻡 㻙 㻜㻚㻜㻝㻠 㼤 㻙 㻜㻚㻝㻜 㻙 㻜㻚㻜㻜㻠 㼥 㻙 㻜㻚㻝㻜 㻙 㻜㻚㻜㻜㻠 㻹㻵㻺 㻹㻭㼄 㻹㻵㻺 㻹㻭㼄 㼎㻞 㻙 㻜㻚㻟㻣 㻙 㻜㻚㻜㻝㻡 㼑㻝 㼘㻝 㻙 㻜㻚㻠㻡 㻙 㻜㻚㻜㻝㻤 㻰㻵㻹 㻹㻵㻸㻵㻹㻱㼀㻱㻾㻿 㻵㻺㻯㻴㻱㻿 㻜㻚㻡㻜 㻜㻚㻜㻞㻜 㻰㻵㻹 㻹㻵㻸㻵㻹㻱㼀㻱㻾㻿 㻵㻺㻯㻴㻱㻿 㻝㻚㻞㻡 㻜㻚㻜㻠㻥 6/8 2013.07 - Rev.E EMD3FHA / UMD3NFHA / IMD3AFRA
www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. Data Sheet EMD3 / UMD3N / IMD3A lDimensions (Unit : mm) Dimension in mm / inches UMT6 㻱 㼤 㻿 㻭 㻭 㻱 㻴 㼑 㻰 㼎 㼏 㻽 㻭㻟 㻸㻝 㻸㼜 㼥 㻿 㻭㻝 㼑㻝 㼎㻞 㼘㻝 㼑 㻭 㻿 Pattern of terminal position areas [Not a recommended pattern of soldering pads] 㻹㻵㻺 㻹㻭㼄 㻹㻵㻺 㻹㻭㼄 㻭 㻜㻚㻤㻜 㻝㻚㻜㻜 㻜㻚㻜㻟㻝 㻜㻚㻜㻟㻥 㻭㻝 㻜㻚㻜㻜 㻜㻚㻝㻜 㻜㻚㻜㻜㻜 㻜㻚㻜㻜㻠 㻭㻟 㼎 㻜㻚㻝㻡 㻜㻚㻟㻜 㻜㻚㻜㻜㻢 㻜㻚㻜㻝㻞 㼏 㻜㻚㻝㻜 㻜㻚㻞㻜 㻜㻚㻜㻜㻠 㻜㻚㻜㻜㻤 㻰 㻝㻚㻥㻜 㻞㻚㻝㻜 㻜㻚㻜㻣㻡 㻜㻚㻜㻤㻟 㻱 㻝㻚㻝㻡 㻝㻚㻟㻡 㻜㻚㻜㻠㻡 㻜㻚㻜㻡㻟 㼑 㻴㻱 㻞㻚㻜㻜 㻞㻚㻞㻜 㻜㻚㻜㻣㻥 㻜㻚㻜㻤㻣 㻸㻝 㻜㻚㻞㻜 㻜㻚㻡㻜 㻜㻚㻜㻜㻤 㻜㻚㻜㻞㻜 㻸㼜 㻜㻚㻞㻡 㻜㻚㻡㻡 㻜㻚㻜㻝㻜 㻜㻚㻜㻞㻞 㻽 㻜㻚㻝㻜 㻜㻚㻟㻜 㻜㻚㻜㻜㻠 㻜㻚㻜㻝㻞 㼤 㻙 㻜㻚㻝㻜 㻙 㻜㻚㻜㻜㻠 㼥 㻙 㻜㻚㻝㻜 㻙 㻜㻚㻜㻜㻠 㻹㻵㻺 㻹㻭㼄 㻹㻵㻺 㻹㻭㼄 㼎㻞 㻙 㻜㻚㻠㻜 㻙 㻜㻚㻜㻝㻢 㼑㻝 㼘㻝 㻙 㻜㻚㻢㻡 㻙 㻜㻚㻜㻞㻢 㻝㻚㻡㻡 㻜㻚㻜㻢㻝 㻰㻵㻹 㻹㻵㻸㻵㻹㻱㼀㻱㻾㻿 㻵㻺㻯㻴㻱㻿 㻜㻚㻞㻡 㻜㻚㻜㻝㻜 㻜㻚㻢㻡 㻜㻚㻜㻞㻢 㻰㻵㻹 㻹㻵㻸㻵㻹㻱㼀㻱㻾㻿 㻵㻺㻯㻴㻱㻿 7/8 2013.07 - Rev.E EMD3FHA / UMD3NFHA / IMD3AFRA
www.rohm.com © 2013 ROHM Co., Ltd. All rights reserved. Data Sheet EMD3 / UMD3N / IMD3A lDimensions (Unit : mm) Dimension in mm / inches SMT6 㻱 㼑 㻰 㻱 㻴 㼎 㼤 㻿 㻭 㻭 㼏 㻽 㻭㻟 㻸㻝 㻸㼜 㻭㻝 㻭 㻿 㼥 㻿 㼑㻝 㼑 㼘㻝 㼎㻞 Pattern of terminal position areas [Not a recommended pattern of soldering pads] 㻹㻵㻺 㻹㻭㼄 㻹㻵㻺 㻹㻭㼄 㻭 㻝㻚㻜㻜 㻝㻚㻟㻜 㻜㻚㻜㻟㻥 㻜㻚㻜㻡㻝 㻭㻝 㻜㻚㻜㻜 㻜㻚㻝㻜 㻜㻚㻜㻜㻜 㻜㻚㻜㻜㻠 㻭㻟 㼎 㻜㻚㻞㻡 㻜㻚㻠㻜 㻜㻚㻜㻝㻜 㻜㻚㻜㻝㻢 㼏 㻜㻚㻜㻥 㻜㻚㻞㻡 㻜㻚㻜㻜㻠 㻜㻚㻜㻝㻜 㻰 㻞㻚㻤㻜 㻟㻚㻜㻜 㻜㻚㻝㻝㻜 㻜㻚㻝㻝㻤 㻱 㻝㻚㻡㻜 㻝㻚㻤㻜 㻜㻚㻜㻡㻥 㻜㻚㻜㻣㻝 㼑 㻴㻱 㻞㻚㻢㻜 㻟㻚㻜㻜 㻜㻚㻝㻜㻞 㻜㻚㻝㻝㻤 㻸㻝 㻜㻚㻟㻜 㻜㻚㻢㻜 㻜㻚㻜㻝㻞 㻜㻚㻜㻞㻠 㻸㼜 㻜㻚㻠㻜 㻜㻚㻣㻜 㻜㻚㻜㻝㻢 㻜㻚㻜㻞㻤 㻽 㻜㻚㻞㻜 㻜㻚㻟㻜 㻜㻚㻜㻜㻤 㻜㻚㻜㻝㻞 㼤 㻙 㻜㻚㻞㻜 㻙 㻜㻚㻜㻜㻤 㼥 㻙 㻜㻚㻝㻜 㻙 㻜㻚㻜㻜㻠 㻹㻵㻺 㻹㻭㼄 㻹㻵㻺 㻹㻭㼄 㼎㻞 㻜㻚㻢㻜 㻙 㻜㻚㻜㻞㻠 㼑㻝 㼘㻝 㻙 㻜㻚㻥㻜 㻙 㻜㻚㻜㻟㻡 㻞㻚㻝㻜 㻜㻚㻜㻤㻟 㻰㻵㻹 㻹㻵㻸㻵㻹㻱㼀㻱㻾㻿 㻵㻺㻯㻴㻱㻿 㻜㻚㻞㻡 㻜㻚㻜㻝㻜 㻜㻚㻥㻡 㻜㻚㻜㻟㻣 㻰㻵㻹 㻹㻵㻸㻵㻹㻱㼀㻱㻾㻿 㻵㻺㻯㻴㻱㻿 8/8 2013.07 - Rev.E EMD3FHA / UMD3NFHA / IMD3AFRA
Notice-PAA-E Rev.001 © 2015 ROHM Co., Ltd. All rights reserved. Notice Precaution on using ROHM Products 1. If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), aircraft/spacecraft, nuclear power controllers, etc.) and whos e malfunction or failure may cause loss of human life, bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writ ing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses in curred by you or third parties arising from the use of any ROHM’s Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASSⅢ CLASSⅢ CLASSⅡb CLASSⅢ CLASSⅣ CLASS Ⅲ 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe desi gn against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are not designed under any special or extr aordinary environments or conditi ons, as exemplified below. Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products ar e exposed to sea wind or corrosive gases, including Cl 2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (ev en if you use no-clean type fluxes, cleaning residue of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subjec t to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short per iod of time, such as pulse. is applied, confirmation of performance characteristics after on-boar d mounting is strongly recomm ended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation (Pd) depending on Ambient temper ature (Ta). When used in sealed area, confirm the actual ambient temperature. 8. Confirm that operation temperat ure is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for fa ilure induced under deviant condi tion from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlori ne, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be us ed on a surface-mount products, the flow soldering method must be used on a through hole mount products. If the flow sol dering method is preferred on a surface-mount products, please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification
Notice-PAA-E Rev.001 © 2015 ROHM Co., Ltd. All rights reserved. Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, pl ease allow a sufficient margin considering variations of the characteristics of the Products and external components, including transient characteri stics, as well as static characteristics. 2. You agree that application notes, re ference designs, and associated data and in formation contained in this document are presented only as guidance for Products use. Theref ore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and storage so that voltage exceeding t he Products maximum rating will not be applied to Products. Please take special care under dry condit ion (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriora te if the Products are stored in the places where: [a] the Products are exposed to sea winds or corros ive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to di rect sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage c ondition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm sol derability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the co rrect direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a hum idity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label QR code printed on ROHM Products label is for ROHM’s internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign trade act, please consult with ROHM in case of export. Precaution Regarding Intellectual Property Rights 1. All information and data including but not limited to application example contain ed in this document is for reference only. ROHM does not warrant that foregoi ng information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. 2. ROHM shall not have any obligations where the claims, actions or demands arising from the co mbination of the Products with other articles such as components, circuits, systems or external equipment (including software). 3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to manufacture or sell products containing the Products, subject to the terms and conditions herein. Other Precaution 1. This document may not be reprinted or reproduced, in whol e or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any wa y whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, incl uding but not limited to, the development of mass-destruction weapons. 4. The proper names of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties.
Notice – WE Rev.001 © 2015 ROHM Co., Ltd. All rights reserved. General Precaution 1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents. ROHM shall n ot be in an y way responsible or liabl e for failure, malfunction or acci dent arising from the use of a ny ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this docume nt is current as of the issuing date and subj ec t to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s representative. 3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or concerning such information.
Minimum Package Quantity 3000 Packing Type Taping Constitution Materials List inquiry RoHS Yes UMD3NFHA - Web Page Distribution Inventory