DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
UMB1F-10~~UMB10F-10 SURFACE MOUNT BRIDGE RECTIFIERS Case: MBF molded plastic body Terminals: Solderable per MIL-STD-750， Method 2026 Weight: Approximated 0.075 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half-wave 60 Hz, resistive or inductive load, for capacitive load current derating by 20 %. PARAMETER SYMBOL UMB1F -10 UMB2F -10 UMB4F -10 UMB6F -10 UMB8F -10 UMB10F -10 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current at TC=125℃ IF(AV) 1.0 A Peak Forward Surge Current (Note1) IFSM 35 A Maximum Forward Voltage at 1.0A VF 1.0 1.3 1.5 V Maximum DC Reverse Current at Rated DC Blocking Voltage at TA=25℃ TA=125℃ IR 5.0 100 uA Typical Junction Capacitance (Note2) CJ 18 pF Maximum Reverse Recovery Time (Note3) Trr 50 75 nS Typical Thermal Resistance (Note4) RθJA RθJC 25 ℃/W Operating and Storage Temperature Range TJ,TSTG -55 to +150 ℃ Notes:1. Measured at 8.3 ms single half sine wave superimposed on rated load (JEDEC Method). 2. Measured at 1MHz and applied reverse voltage of 4 V D.V. 3. Measured with IF=0.5A, IR=1A, Irr=0.25A. PIN DESCRIPTION
1 Input Pin（~）
2 Input Pin（~）
3 Output Anode（+）
4 Output Cathode（-）
FEATURES
For surface mount applications Glass passivated chip junction Ultrafast reverse recovery time MECHANICAL DATA PINNING 1 / 3www.pingjingsemi.com Revision:1.0 Oct-2017
RATINGS AND CHARACTERISTIC CURVES 50 ohm Noninductive 25Vdc approx D.U.T 10 ohm Noninductive NonInductive 1 ohm OSCILLOSCOPE Note 1 PULSE GENERATOR Note 2 Note：1.Rise Time = 7ns, max. Input Impedance = 1megohm,22pF. 2. ies Time =10ns, max. Source Impedance = 50 ohms. Fig.1 Reverse Recovery Time Characteristic and Test Circuit Diagram Fig.3 Typical Reverse Characteristics 20 100600 0.1 1.0 % of PIV.VOLTS 100 40 80 300 TJ=25°C TJ=75°C TJ=125°C -0.25 -1.0 +0.5 trr 10ns/div Set time Base for 10ns/div 10 100 Fig.4 Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (A) Number of Cycles 8.3 ms Single Half Sine Wave (JEDEC Method) 0.5 1.0 0.0 25 50 75 100 125 150 175 Average Forward Current (A) Case Temperature (°C) Fig.2 Maximum Average Forward Current Rating Single phase half wave resistive or inductive Fig.3 Typical Instaneous Forward Characteristics Instaneous Forward Current (A) 2.50.0 0.01 0.1 1.0 0.5 1.0 1.5 2.0 Instaneous Forward Voltage (V) pulse with 300μs 1% duty cycle TJ= 25°C UMB1F-10/UMB2F-10 UMB6F-10~UMB10F-10 UMB4F-10 IR- Reverse Current ( μA) UMB1F-10~~UMB10F-10 SURFACE MOUNT BRIDGE RECTIFIERS 2 / 3www.pingjingsemi.com Revision:1.0 Oct-2017
UMB1F-10 thru UMB10F-10 MBF 3,000/Tape & Reel (11 inches) 5,000/ Tape & Reel (13 inches) PACKAGE OUTLINE MBF
ORDERING INFORMATION
e e E D ∠ALL ROUND HE L C a A d MBF mechanical data UNIT A C D E HE d e L L1 a ∠ mm mil max 63 8.7 197 161 276 106 31 67 43 8 min 47 5.9 177 142 252 91 20 51 20 — UMB1F-10~~UMB10F-10 SURFACE MOUNT BRIDGE RECTIFIERS 3 / 3www.pingjingsemi.com Revision:1.0 Oct-2017