UM7000_05 MICROSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
Page 1Copyright 2005 Rev. 0, 2005-09-08 WWW.Microsemi .COM UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES
DESCRIPTION
The UM7000 and UM7100 series offer moderately high power handling in combination with reasonably low levels of both series resistance and capacitance. The UM7200 series offers the lowest series resistance, but the highest capacitance of the group. The differences in specified performance, for each of the series, results from different I-region thickness. The three series have broad applicability in many RF and microwave switch and attenuator circuits. Additionally, the UM7100 in leaded versions is usually the most cost-effective diode choice in high volume usage. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED) Package Condition PD θ A 25 OC Pin Temperature 10 W 15 OC/W B & E ½ in. total length to 25 OC Contact Free Air 5.5 W 1.5 W
27.5 OC/W
C 25 OC Stud Temperature 10 W 15 OC/W D 25 OC Stud Temperature 7.5 W 20 OC/W SM 25 OC End Cap Temperature 8 W 17 OC/W All 1 us pulse (Single) UM7000 UM7100 UM7200 60 kW 35 kW 20 kW VOLTAGE RATINGS Reverse Voltage @ 10 uA
100 UM7001 UM7101 UM7201
200 UM7002 UM7102 UM7202
600 UM7006 - -
1000 UM7010 - -
Voltage ratings to 1000V (UM7000) Average power dissipation to 10 W Series resistance as low as 0.25 Ω Carrier lifetime greater than 2.5 µs Non cavity design Thermally matched configuration Low capacitance at 0 V bias Low conductance at 0 V bias Compatible with automatic insertion equipment APPLICATI ONS/BENEFITS Isolated stud package available Surface mount package available Style “B” Style “SM” UUMM77000000 SSEERRIIEESS
Page 2Copyright 2005 Rev. 0, 2005-09-08 WWW.Microsemi .COM UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES 010 110 210 310 Vr (V) CAPACITANCE (pF) UM7000 TYPICAL
1 MHz
5 MHz
10 MHz
=> 100 MHz ELECTRICAL PARAMETERS @ 25°C (unless otherwise specified) Parameter Symbol Conditions UM7000 UM7100 UM7200 Units Reverse Current (Max) IR At rated voltage 10 10 10 uA Series Resistance(Max) R S If = 100 mA, F= 100 MHz 1.0 0.6 0.25 Ohm Capacitance (Max) C T VR = 100 V, F = 1 MHZ 0.9 1.2 2.2 pF Parallel Resistance(Min) RP VR = 100 V, F = 100 MHz 200k 150k 70k Ohms Carrier Lifetime(Min) τ IF = 10 mA 2.5 2.0 1.5 us I-Region Width (Min) W - 150 80 40 um EELLEECCTTRRIICCAALLSS
Page 3Copyright 2005 Rev. 0, 2005-09-08 WWW.Microsemi .COM UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES 010 110 210 310 Vr (V) CAPACITANCE (pF) UM7100 TYPICAL =>100 MHz 010 110 210 310 Vr (V) CAPACITANCE (pF) UM7200 TYPICAL
100 MHz
=>100 MHz EELLEECCTTRRIICCAALLSS
Page 4Copyright 2005 Rev. 0, 2005-09-08 WWW.Microsemi .COM UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES 010 110 210 310 Vr (V) 010 110 210 310 Rp (kOhms) UM7000 TYPICAL
0.5 GHz
1.0 GHz
3.0 GHz
Vr (V) 010 110 210 310 Rp (kOhms) UM7100 TYPICAL
Page 5Copyright 2005 Rev. 0, 2005-09-08 WWW.Microsemi .COM UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES 010 110 210 310 Vr (V) -110 010 110 210 Rp (kOhms) UM7200 TYPICAL -310 -210 -110 010 110 210 310 If (mA) -110 010 110 210 310 410 510 Rs (Ohms) Rs versus If TYPICAL UM7000 UM7100 UM7200 EELLEECCTTRRIICCAALLSS
Page 6Copyright 2005 Rev. 0, 2005-09-08 WWW.Microsemi .COM UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES Vf (V) -510 -410 -310 -210 -110 010 If (mA) If versus Vf TYPICAL UM7000UM7100UM7200 0 25 50 75 100 125 150 175 STUD TEMPERATURE (C) MAX POWER DISSIPATION (W) POWER RATING STUD MOUNTED DIODES TYPICAL "C" PACKAGE "D" PACKAGE EELLEECCTTRRIICCAALLSS
Page 7Copyright 2005 Rev. 0, 2005-09-08 WWW.Microsemi .COM UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES -610 -510 -410 -310 -210 -110 010 PULSE WIDTH (SEC) -210 -110 010 110 210 PULSE THERMAL IMPEDANCE (C/W) PULSE THERMAL IMPEDANCE VERSUS WIDTH TYPICAL UM7000 THETA = 15 C/W MAX. EELLEECCTTRRIICCAALLSS
Page 8Copyright 2005 Rev. 0, 2005-09-08 WWW.Microsemi .COM UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES STYLE “A” STYLE “B” STYLE “C” STYLE “CR” MMEECCHHAANNIICCAALL MMEECCHHAANNIICCAALL
Page 9Copyright 2005 Rev. 0, 2005-09-08 WWW.Microsemi .COM UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES STYLE “D” STYLE “DR” STYLE “E” STYLE “SM” MMEECCHHAANNIICCAALL
Page 10Copyright 2005 Rev. 0, 2005-09-08 WWW.Microsemi .COM UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES UM7000/UM7100/UM7200 STYLE “SM” FOOTPRINT NOTES: 1. These dimensions will match the terminals and provide for additional solder fillets at the outboard ends at least as wide as the terminals themselves, assuming accuracy of placement within 0.005” 2. If the mounting method chosen requires use of an adhesive separate from the solder compound, a round (or square) spot of cement as shown should be centrally located. MMEECCHHAANNIICCAALL
Page 11Copyright 2005 Rev. 0, 2005-09-08 WWW.Microsemi .COM UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES NOTES: NNOOTTEESS