UM5204_16 UNIONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

 USB 2.0  USB OTG  10/100/1000Mbit Ethernet  Monitors and Flat Panel Displays  Digital Visual Interface (DVI)  High-Definition Multimedia Interface (HDMI)  SIM Ports  IEEE 1394 Firewire Ports  Transient Protection for High-Speed Data Lines to IEC 61000 -4-2 (ESD) ±20kV ( Air), ±12kV (Contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lighting) 10A (8/20µs)  Array of Surge Rated Diodes with Internal TVS Diode  Protects up to Four I/O Lines & Power Line  Low Capacitance (< 1pF) for High-Speed Interfaces, No Insertion Loss to 2.0GHz  Low Leakage Current and Clamping Voltage  Low Operating Voltage: 5.0V

http://www.union-ic.com Rev.04 Mar.2016 2/11 UM5204 Pin Configurations Top View 1 6 I/O 1 GND I/O 3 I/O 2 VCC I/O 4 UCF XX XX: Week Code UM5204EECD SOT23-6 I/O 1 VCC I/O 3 I/O 2 GND I/O 4 UCC XX XX: Week Code UM5204EECE SOT23-6

Ordering Information

Voltage Packaging Type Channel Marking Code Shipping Qty UM5204EECD 5.0V SOT23-6 4 UCF 3000pcs/7 Inch Tape & Reel UM5204EECE 5.0V SOT23-6 4 UCC 3000pcs/7 Inch Tape & Reel Absolute Maximum Ratings Rating Symbol Value Unit Peak Pulse Power (tP=8/20µs) Ppk 200 Watts Peak Pulse Current (tP=8/20µs) IPP 10 A Peak Pulse Current (tP=5/50ns) IPP 40 A ESD per IEC 61000-4-2 (Air) ESD per IEC 61000-4-2 (Contact) VESD ±20 ±12 kV Operating Temperature TJ -55 to +125 °C Storage Temperature TSTG -55 to +150 °C

http://www.union-ic.com Rev.04 Mar.2016 3/11 UM5204 Electrical Characteristics (Note 1) Parameter Symbol Test Conditions Min Typ Max Unit Reverse Stand-Off Voltage VRWM VCC to GND 5.0 V Reverse Breakdown Voltage VBR IT=1mA, VCC to GND 6.0 V Reverse Leakage Current IR VRWM=5V, VCC to GND 2 µA Clamping Voltage VC IPP=1A, 8/20µs Any I/O Pin to GND 8 10 V Clamping Voltage VC IPP=5A, 8/20µs Any I/O Pin to GND 12 15 V Junction Capacitance Cj VR=0V, f=1MHz Any I/O Pin to GND 2 pF VR=0V, f=1MHz , Between I/O Pins 1 pF VR=0V, f=1MHz VCC to GND 60 pF VR=2.5V, f=1MHz VCC to GND 40 pF Reverse Recovery Time Trr Any I/O Pin to VCC 130 ns GND to VCC 300 ns GND to any I/O Pin 400 ns Note 1: I/O pins are pin 1, 3, 4, and 6

http://www.union-ic.com Rev.04 Mar.2016 4/11 UM5204 Typical Operating Characteristics 0 25 50 75 100 125 150 100 Ambient Temperature - TA(°C) Power Derating Curve % of Rated Power or Ipp 110 0 5 10 15 20 25 30 100 Time (µs) Pulse Waveform Percent of Ipp 110 Waveform Parameters: tr=8µs td=20µs e-t td=IPP/2 0 1 2 3 4 5 0.5 1.5 2.5 Capacitance – Cj (pF) Reverse Voltage – VR (V) Junction Capacitance vs. Reverse Voltage f=1MHz Any I/O Pin to GND 0.1 1 10 100 1000 0.01 0.1 Peak Pulse Power – PPK (kW) Pulse Duration – tp (µs) Non-Repetitive Peak Pulse Power vs. Pulse Time 0 2 4 6 8 10 16Clamping Voltage – Vc (V) Peak Pulse Current – Ipp (A) Waveform Parameters: tr=8µs td=20µs Clamping Voltage vs. Peak Pulse Current Any I/O Pin to GND VCC to GND 0 2 4 6 8 10 Forward Voltage – VF (V) Forward Current – IF (A) Waveform Parameters: tr=8µs td=20µs Forward Voltage vs. Forward Current

http://www.union-ic.com Rev.04 Mar.2016 5/11 UM5204 Typical Operating Characteristics (Continued) Single End Bandwidth Differential Bandwidth Crosstalk

http://www.union-ic.com Rev.04 Mar.2016 9/11 UM5204

Package Information

b D E e A Top View Side View 1 3 c L θ End View 6 5 DIMENSIONS Symbol MILLIMETERS INCHES Min Typ Max Min Typ Max b 0.30 - 0.50 0.012 - 0.020 D 2.82 - 3.10 0.111 - 0.122 e 0.95REF 0.037REF e1 1.90REF 0.075REF L 0.30 - 0.60 0.012 - 0.024 θ 0° - 8° 0° - 8° Land Pattern 0.56 0.95 0.95 2.35 1.20 NOTES: 1. Compound dimension: 2.92×1.60； 2. Unit: mm; 3. General tolerance ±0.0 5mm unless otherwise specified; 4. The layout is just for reference. Tape and Reel Orientation XXUCF

http://www.union-ic.com Rev.04 Mar.2016 10/11 UM5204 UM5204EECE SOT23-6 Outline Drawing b D E e A Top View Side View 1 3 c L θ End View 6 5 DIMENSIONS Symbol MILLIMETERS INCHES Min Typ Max Min Typ Max b 0.30 - 0.50 0.012 - 0.020 D 2.82 - 3.10 0.111 - 0.122 e 0.95REF 0.037REF e1 1.90REF 0.075REF L 0.30 - 0.60 0.012 - 0.024 θ 0° - 8° 0° - 8° Land Pattern 0.56 0.95 0.95 2.35 1.20 NOTES: 1. Compound dimension: 2.92×1.60； 2. Unit: mm; 3. General tolerance ±0.0 5mm unless otherwise specified; 4. The layout is just for reference. Tape and Reel Orientation XXUCC

http://www.union-ic.com Rev.04 Mar.2016 11/11 UM5204 GREEN COMPLIANCE Union Semiconductor is committed to environmental excellence in all aspects of its operations including meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerou s successful programs have been implemented to reduce the use of hazardous substances and/or emissions. All Union components are compliant with the RoHS directive, which helps to support customers in their compliance with environmental directives. For more green compliance information, please visit: http://www.union-ic.com/index.aspx?cat_code=RoHSDeclaration IMPORTANT NOTICE The information in this document has been carefully re viewed and is believed to be accurate. Nonetheless, this document is subject to change without notice. Union assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the con tained information, or to notify a person or organization of any update. Union reserves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Union Semiconductor, Inc Add: Unit 606, No.570 Shengxia Road, Shanghai 201210 Tel: 021-51093966 Fax: 021-51026018 Website: www.union-ic.com