UM4501 UNIONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
Signal Lines Protection Cell Phone CCD Camera Lines Clamshell Cell Phones Bidirectional EMI Filter with Integrated TVS for ESD Protection ESD Protection to IEC 61000-4-2 (ESD) Level 4, ±15kV (Air), ±8kV (Contact) Filter Performance: 19dB Minimum Attenuation from 800MHz to 2.7GHz TVS Working Voltage: 5V Inductor: 17nH (Typical) Capacitors: 12pF (Typical at VR=2.5V) Protection and Filtering for Multi Lines UM4501/4511: Four Lines UM6501: Six Lines UM8501/8511: Eight Lines
http://www.union-ic.com Rev.03 Apr.2016 2/12 UM4501/4511/6501/8501/8511
Ordering Information
UM4501 5.0V DFN8 2.0×2.0 4 ABC 3000pcs /7Inch Tape & Reel UM4511 5.0V DFN8 1.7×1.3 4 BB UM6501 5.0V DFN12 3.0×1.6 6 6501 UM8501 5.0V DFN16 4.0×1.6 8 8501 UM8511 5.0V DFN16 3.3×1.3 8 8511 Pin Configurations Top View L Cd Cd Device Schematic (4X) ABC M M: Month Code UM4501 DFN8 2.0×2.0 BB M M: Month Code UM4511 DFN8 1.7×1.3 L Cd Cd Device Schematic (6X) 6501:XX XX: Week Code UM6501 DFN12 3.0×1.6 L Cd Cd Device Schematic (8X) 8501:XX XX: Week Code UM8501 DFN16 4.0×1.6 8511:XX XX: Week Code UM8511 DFN16 3.3×1.3
http://www.union-ic.com Rev.03 Apr.2016 3/12 UM4501/4511/6501/8501/8511 Absolute Maximum Ratings Parameter Symbol Value Unit Junction Temperature TJ 125 °C Operating Temperature Range TOP -40 to 85 °C Storage Temperature Range TSTG -55 to 150 °C
Electrical Characteristics
(TJ =25°C, unless otherwise noted) Parameter Symbol Conditions Min Typ Max Unit TVS Reverse Stand-Off Voltage VRWM 5 V TVS Reverse Breakdown Voltage VBR IT=1mA 6 8 10 V TVS Reverse Leakage Current IR VRWM=3.3V 0.1 μA DC Resistance Rcc 10 Ω Filter Cut-Off Frequency fc Zsource=Zload=50Ω 250 MHZ Inductance L 17 nH Capacitance Cd VR=2.5V, f=1MHz 12 pF Total Capacitance Ctotal Input to GND, Each Line VR=2.5V, f=1MHz 19 24 29 pF Stop Band Attenuation 800MHz to 2.7GHz 19 dB
http://www.union-ic.com Rev.03 Apr.2016 4/12 UM4501/4511/6501/8501/8511 Typical Operating Characteristics Typical Insertion Loss Analog Crosstalk
often described in terms of dB. When examining S parameters, S21 is often described as insertion loss. can be analyzed in terms of insertion loss (S21). Figure 1. Test Conditions: Source Impedance=50Ω starts from DC and ends at the cut off frequency. the effects of parasitic inductance in the board traces. Parasitic inductance (L) present in the board layout will affect the filtering performance of the devi ce.
http://www.union-ic.com Rev.03 Apr.2016 7/12 UM4501/4511/6501/8501/8511
Package Information
UM4501: DFN8 2.0×2.0 Outline Drawing e b L A D E Pin #1 ID Top View Bottom View Side View PIN 1 DOT BY MARKING DIMENSIONS Symbol MILLIMETERS INCHES Min Typ Max Min Typ Max A 0.55 - 0.80 0.022 - 0.031 A1 0.00 - 0.05 0.000 - 0.002 A3 0.20REF 0.008REF b 0.18 - 0.30 0.007 - 0.012 D2 1.35 - 1.80 0.053 - 0.071 E2 0.75 - 1.00 0.030 - 0.039 e 0.50TYP 0.020TYP Land Pattern 0.50 0.25 0.70 2.00 0.55 1.70 2.00 2.40 0.20 NOTES: 1. Compound dimension: 2.00×2.00; 2. Unit: mm; 3. General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. Tape and Reel Orientation ABC M
http://www.union-ic.com Rev.03 Apr.2016 8/12 UM4501/4511/6501/8501/8511 UM4511: DFN8 1.7×1.3 Outline Drawing A Side View D2D e b E L (Pin #1 ID) C'0.2×45º Top View Bottom View DIMENSIONS Symbol MILLIMETERS INCHES Min Typ Max Min Typ Max A1 0.00 - 0.05 0.000 - 0.002 A3 0.15REF 0.006REF D2 0.85 - 1.40 0.033 - 0.055 E2 0.20 - 0.50 0.008 - 0.020 e 0.40TYP 0.016TYP L 0.17 - 0.37 0.007 - 0.015 Land Pattern 0.40 0.20 1.70 1.30 1.70 1.30 0.47 0.20 0.25 NOTES: 1. Compound dimension: 1.70×1.30; 2. Unit: mm; 3.General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. Tape and Reel Orientation BB M
http://www.union-ic.com Rev.03 Apr.2016 9/12 UM4501/4511/6501/8501/8511 UM6501: DFN12 3.0×1.6 Outline Drawing D D2 E e b C'0.2×45º (Pin #1 ID) L E2A1 A Top View Bottom View Side View PIN 1 DOT BY MARKING DIMENSIONS Symbol MILLIMETERS INCHES Min Typ Max Min Typ Max A1 0.00 - 0.05 0.000 - 0.002 A3 0.15REF 0.006REF E2 0.25 - 0.50 0.010 - 0.020 e 0.50TYP 0.020TYP L 0.23 - 0.38 0.009 - 0.015 Land Pattern 0.50 0.40 1.60 0.58 2.20 3.00 2.00 0.20 0.25 NOTES: 1. Compound dimension: 3.00×1.60; 2. Unit: mm; 3. General tolerance ±0.05mm unless other - wise specified; 4. The layout is just for reference. Tape and Reel Orientation 6501:XX
http://www.union-ic.com Rev.03 Apr.2016 10/12 UM4501/4511/6501/8501/8511 UM8501: DFN16 4.0×1.6 Outline Drawing PIN 1 DOT BY MARKING D E Top View e b L Bottom View A Side View (Pin #1 ID) C'0.2×45º DIMENSIONS Symbol MILLIMETERS INCHES Min Typ Max Min Typ Max A 0.50 - 0.80 0.020 - 0.031 A1 0.00 - 0.05 0.000 - 0.002 A3 0.203REF 0.008REF b 0.15 - 0.30 0.006 - 0.012 D2 2.95 - 3.30 0.116 - 0.130 E2 0.30 - 0.60 0.012 - 0.024 e 0.50TYP 0.020TYP L 0.15 - 0.38 0.006 - 0.015 Land Pattern 0.50 0.40 1.60 0.58 3.20 4.00 2.00 0.20 0.25 NOTES: 1. Compound dimension: 4.00×1.60; 2. Unit: mm; 3. General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. Tape and Reel Orientation 8501:XX
http://www.union-ic.com Rev.03 Apr.2016 11/12 UM4501/4511/6501/8501/8511 UM8511: DFN16 3.3×1.3 Outline Drawing Side View L e b Bottom View C'0.2×45º (Pin #1 ID) D E PIN 1 DOT BY MARKING Top View A DIMENSIONS Symbol MILLIMETERS INCHES Min Typ Max Min Typ Max A1 0.00 - 0.05 0.000 - 0.002 A3 0.15REF 0.006REF D2 2.45 - 3.00 0.096 - 0.118 E2 0.20 - 0.50 0.008 - 0.020 e 0.40TYP 0.016TYP L 0.17 - 0.37 0.007 - 0.015 Land Pattern 0.40 0.25 1.30 0.47 2.90 3.30 1.70 0.20 0.20 NOTES: 1. Compound dimension: 3.30×1.30; 2. Unit: mm; 3. General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. Tape and Reel Orientation 8511:XX
http://www.union-ic.com Rev.03 Apr.2016 12/12 UM4501/4511/6501/8501/8511 GREEN COMPLIANCE Union Semiconductor is committed to environmental excellence in all aspects of its operations including meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce the use of hazardous substances and/or emissions. All Union components are compliant with the RoHS directive, which helps to support customers in their compliance with environmental directives. For more green compliance information, please visit: http://www.union-ic.com/index.aspx?cat_code=RoHSDeclaration IMPORTANT NOTICE The information in this document has been carefully reviewed and is believed to be accurate. Nonetheless, this document is subject to change without notice. Union assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any update. Union reserves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Union Semiconductor, Inc Add: Unit 606, No.570 Shengxia Road, Shanghai 201210 Tel: 021-51093966 Fax: 021-51026018 Website: www.union-ic.com