UM3204 UNIONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Features
z SPI, MICROWIRE, and I 2C Level Translation z Low-Voltage ASIC Level Translation z Smart Card Readers z Cell-phone Cradles z Portable POS Systems z Portable Communication Devices z Low-Cost Serial Interfaces z Cell-Phones z GPS z Telecommunications Equipment z Max Data Rates: 24Mbps(Push Pull),
2 M b p s ( O p e n D r a i n )
z Bidirectional Level Translation z 1.65V to 3.6V on A port and 2.3V to 5.5V on B port(VCCA≤VCCB) z ±5kV ESD Protection on B port z No Power-Supply Sequencing Required VCCA or VCCB Can Be Ramped First z CSP12, QFN14 and TSSOP14 Packages P i n C o n f i g u r a t i o n s T o p V i e w (CSP12 Top View) M: Month Code UM3204H
http://www.union-ic.com Rev.06 May.2012 2 / 1 3 UM3204 (TSSOP14 Top View) XX: Week Code UM3204UE Pin Description Pin Name Function VCCA A-Port supply voltage. 1.65V ≤VCCA≤3.6V and VCCA≤VCCB A1 Input/Output 1. Referenced to V CCA A2 Input/Output 2. Referenced to V CCA A3 Input/Output 3. Referenced to V CCA A4 Input/Output 4. Referenced to V CCA GND Ground OE 3-state output enable. Pull OE low to place all outputs in 3-state mode. Referenced to VCCA B4 Input/Output 4. Referenced to V CCB B3 Input/Output 3. Referenced to V CCB B2 Input/Output 2. Referenced to V CCB B1 Input/Output 1. Referenced to V CCB VCCB B-Port supply voltage. 2.3V ≤VCCB≤5.5V (QFN14 Top View) XX: Week Code UM3204Q
http://www.union-ic.com Rev.06 May.2012 3 / 1 3 UM3204
Ordering Information
Part Number Packaging Type Marking Code Shipping Qty UM3204H CSP12 1.9×1.4 AAB 3000pcs/7Inch Tape & Reel UM3204Q QFN14 3.5×3.5 UM3204Q 3000pcs/13Inch Tape & Reel UM3204UE TSSOP14 UM3204UE 3000pcs/13Inch Tape & Reel Absolute Maximum Ratings (Note 1) Over operating free-air temperature range (unless otherwise noted) Symbol Parameter Value Unit VCCA Supply Voltage Range -0.5 to +4.5 V VCCB Supply Voltage Range -0.5 to +6.5 V A ports -0.5 to +4.5 VI Input Voltage Range B ports -0.5 to +6.5 V A ports -0.5 to +4.5 VO Voltage Range applied to any output in the high-impedance or power-off state B ports -0.5 to +6.5 V A ports -0.5 to ( V CCA+0.5) VO Voltage Range applied to any output in the high or low state (Note 2) B ports -0.5 to ( V CCB+0.5) V IIK Input Clamp Current VI＜0 -50 mA IOK Output Clamp Current VO＜0 -50 mA IO Continuous Output Current ±50 mA Continuous Current through V CCA, VCCB, or GND ±100 mA TOP Operating Temperature Range -40 to +85 °C TSTG Storage Temperature Range -65 to +150 °C Note1. Stresses beyond those listed under "a bsolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to ab solute-maximum-rated conditions for extended periods may affect device reliability. Note2. The value of VCCA and VCCB are provided in the recommended operating conditions table. Recommended Operating Conditions (Note 1, 2) Symbol Parameter V CCA V CCB M i n M a x U n i t VCCA 1.65 3.6 V VCCB Supply Voltage 2 . 3 5 . 5 V B- Port V CCI - 0 . 4 V CCI V VIH High Level Input Voltage A - P o r t 0 0 . 1 5 B - P o r t 0 0 . 1 5 V VIL Low Level Input Voltage OE 1.65V to 3.6V 2.3V to 5.5V 0 V CCA×0.35 V A-Port push-pull driving 1 0 B-Port push-pull driving 1 0 Δt/Δv Input Transition Rise or Fall Time Control input 1.65V to 3.6V 2.3V to 5.5V 1 0 ns/V Note1. VCCI is the supply voltage associated with the input port. Note2. VCCA must be less than or equal to VCCB and must not exceed 3.6 V.
http://www.union-ic.com Rev.06 May.2012 4 / 1 3 UM3204 Electrical Characteristics (Note 1, 2, 3) Over recommended operating free-air temperature range (unless otherwise noted) TA=25℃ -40 ℃ to 85℃ Parameter Test Conditions V CCA V CCB T y p M a x M i n M a x Unit II OE V I=VCCI or GND 1.65V to 3.6V 2.3V to 5.5V ±1 ±2 μA IOZ A or B Port OE=V IL 1.65V to 3.6V 2.3V to 5.5V ±1 ±2 μA 1.65V to VCCB 2.3V to 5.5V 2.4 3.6V 0V 2.2ICCA VI=VO=open, IO=0 0V 5.5V -1 μA 1.65V to VCCB 2.3V to 5.5V 12 3.6V 0V -1ICCB VI=VO=open, IO=0 0V 5.5V 1 μA ICCA +ICCB VI=VO=open, Ci OE 3.3V 3.3V 2.5 3.5 pF A Port 5 6.5CiO B Port 3.3V 3.3V 12 16.5 pF Note1. VCCI is the supply voltage associated with the input port. Note2. VCCO is the supply voltage associated with the output port. Note3. VCCA must be less than or equal to VCCB and must not exceed 3.6 V. Timing Requirements Over recommended operating free-air temperature range, VCCA= 1.8V±0.15V (unless otherwise noted) VCCB=2.5V± 0.2V VCCB=3.3V ±0.3V VCCB=5V± 0.5V Min Max Min Max Min Max Unit P u s h - p u l l d r i v i n g 2 4 2 4 2 4 Data Rate O p e n - d r a i n d r i v i n g 2 2 2 Mbps Push-pull driving 41 41 41 tw Pulse duration Open-drain driving Data inputs 500 500 500 ns Timing Requirements Over recommended operating free-air temperature range, VCCA= 2.5V±0.2V (unless otherwise noted) VCCB=2.5V± 0.2V VCCB=3.3V ±0.3V VCCB=5V± 0.5V Min Max Min Max Min Max Unit P u s h - p u l l d r i v i n g 2 4 2 4 2 4 Data Rate O p e n - d r a i n d r i v i n g 2 2 2 Mbps Push-pull driving 41 41 41 tw Pulse duration Open-drain driving Data inputs 500 500 500 ns Timing Requirements Over recommended operating free-air temperature range, VCCA= 3.3V±0.3V (unless otherwise noted) VCCB=3.3V ±0.3V VCCB=5V± 0.5V Min Max Min Max Unit Push-pull driving 24 24 Data Rate O p e n - d r a i n d r i v i n g 2 2 Mbps Push-pull driving 41 41 tw Pulse duration Open-drain driving Data inputs 500 500 ns
http://www.union-ic.com Rev.06 May.2012 5 / 1 3 UM3204 Switching Characteristics Over recommended operating free-air temperature range, VCCA= 1.8V±0.15V (unless otherwise noted) VCCB=2.5V ±0.2V VCCB=3.3V ±0.3V VCCB=5V± 0.5V Paramete r From (Input) To (Output) Test Conditions Min Max Min Max Min Max Unit P u s h - p u l l 6 . 8 6 . 8 7 tPLH A B Open-drain 45 260 36 208 27 198 ns Push-pull 5.3 4.5 0.5 tPLH B A Open-drain 45 175 36 140 27 102 ns A 200 200 200 tdis OE B 200 200 200 ns A 50 40 35 ten OE B 50 40 35 ns tSK(O) Channel-to-channe l 1 1 1 ns Push-pull 24 24 24 Max data rate Open-drain 2 2 2 Mbps
http://www.union-ic.com Rev.06 May.2012 6 / 1 3 UM3204 Switching Characteristics Over recommended operating free-air temperature range, VCCA= 2.5V±0.2V (unless otherwise noted) VCCB=2.5V ±0.2V VCCB=3.3V ±0.3V VCCB=5V± 0.5V Paramete r From (Input) To (Output) Test Conditions Min Max Min Max Min Max Unit P u s h - p u l l 3 . 5 4 . 1 4 . 4 tPLH A B Open-drain 43 250 36 206 27 190 ns Push-pull 2.5 1.6 0.7 tPLH B A Open-drain 44 170 37 140 27 103 ns A 200 200 200 tdis OE B 200 200 200 ns A 50 40 35 ten OE B 50 40 35 ns tSK(O) Channel-to-channe l 1 1 1 ns Push-pull 24 24 24 Max data rate Open-drain 2 2 2 Mbps
http://www.union-ic.com Rev.06 May.2012 7 / 1 3 UM3204 Switching Characteristics Over recommended operating free-air temperature range, VCCA= 3.3V±0.3V (unless otherwise noted) VCCB=3.3V ±0.3V VCCB=5V± 0.5V Paramete r From (Input) To (Output) Test Conditions Min Max Min Max Unit P u s h - p u l l 4 . 2 4 . 4 tPLH A B Open-drain 36 204 28 165 ns Push-pull 2.5 3.3 tPHL O p e n - d r a i n 1 1 2 4 1 9 7 Push-pull 2.5 2.6 tPLH B A O p e n - d r a i n 3 1 3 9 3 1 0 5 ns A 200 200 tdis OE B 200 200 ns A 40 35 ten OE B 40 35 ns Push-pull 2.3 5.6 1.9 4.8 trA A port rise time Open-drain 25 116 19 85 ns Push-pull 2.5 6.4 2.1 7.4 trB B port rise time Open-drain 26 116 14 72 ns tSK(O) Channel-to-channel 1 1 ns Push-pull 24 24 Max data rate Open-drain 2 2 Mbps
http://www.union-ic.com Rev.06 May.2012 8 / 1 3 UM3204 Applications Information The UM3204 can be used in level-translation applications for interfacing devices or systems operating at different interface voltages with one another. The UM3204 is ideal for use in application where an open-drain driver is connect ed to the data I/Os. The UM3204 can also be used in applications where a push-pull driver is connected to the data I/Os, but the UM3304 might be a better option for such push-pull applications. Block Diagram The UM3204 (block diagram see Figure 1) does not require a direction-control signal to control the direction of data flow from A to B or from B to A. Each A-port I/O has an internal 10-k Ω pull-up resistor to V CCA, and each B-port I/O has an internal 10-k Ω pull-up resistor to V CCB. During a rising edge, the one-shot turns on the PMOS transistors (PU1, PU2) for a short duration, which speeds up the low-to-high transition. Figure 1 Block Diagram of UM3204 I/O Cell Input Driver Requirements The fall time (tfA, tfB) of a signal depends on the output impedance of the external device driving the data I/Os of the UM3204. Similarly, the tPHL and the maximum date rates also depend on the output impedance of the external driver. The values for tfA, tfB, tPHL, and the maximum date rates in the data sheet assume that the output impedance of the external driver is less than 50Ω. Power Up During operation, ensure that V CCA≤VCCB at all times. During power-up sequencing, V CCA≥ VCCB does not damage the device, so any power supply can be ramped up first. Enable and Disable The UM3204 has an OE input that is used to di sable the device by setting OE = low, which places all I/Os in the high-impedance (Hi-Z) state. The disable time (tdis) indicates the delay between the time when OE goes low and when the outputs actua lly get disabled (Hi-Z). The enable time (ten) indicates the amount of time the user must allow for the one-shot circuitry to become operational after OE is taken high.
http://www.union-ic.com Rev.06 May.2012 9 / 1 3 UM3204 Pull-up or Pull-down Resistors on I/O Lines Each A-port I/O has an internal 10-k Ω pull-up resistor to V CCA, and each B-port I/O has an internal 10-k Ω pull-up resistor to V CCB. If a smaller value of pull-up resistor is required, an external resistor must be added from the I/O to V CCA or V CCB (in parallel with the internal 10-k Ω resistor). Test Circuits A. CL i n c l u d e s p r o b e a n d j i g c a p a c i t a n c e s . B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR≤100MHz, ZO=50Ω, dv/dt≥1V/ns. D. The outputs are measured one at a time, with one transition per measurement. E. TPLZ and TPHZ are the same as tdis. F. TPZL and TPZH are the same as ten. G. TPLH and TPHL are the same as tpd. H. VCCI is the VCC associated with the input port. I. VCCO is the VCC associated with the output port. J. All parameters and waveforms are not applicable to all devices. Figure 2 Load Circuits and Voltage Waveforms
http://www.union-ic.com Rev.06 May.2012 1 0 / 1 3 UM3204
Package Information
UM3204H: CSP12 1.90×1.40 Outline Drawing DIMENSIONS Millimeters Inch Symbol Min Max Min Max A 0.65 0.026 A1 0.21 0.24 0.008 0.010 A2 0.40 0.42 0.016 0.017 D 1.82 1.90 0.073 0.076 E 1.32 1.40 0.053 0.056 D1 1.50TYP 0.060TYP E1 1.00 TYP 0.040 TYP e 0.50 TYP 0.020 TYP b 0.27 0.32 0.011 0.013 C 0.50 TYP 0.020 TYP L 0.15 0.17 0.006 0.007 Land Pattern NOTES: 1. Bump is Lead Free Sn/Ag/Cu. 2. Non-solder mask defined copper landing pad. 3. Laser Mark on silicon die back; back-lapped. Tape and Reel Orientation
http://www.union-ic.com Rev.06 May.2012 1 1 / 1 3 UM3204 UM3204Q: QFN14 3.50×3.50 Outline Drawing DIMENSIONS Millimeters Inch Symbol Min Max Min Max A - 0.9 - 0.035 A1 - 0.7 - 0.028 A2 0.2 REF 0.008REF A3 0 0.05 0 0.002 b 0.2 0.3 0.008 0.012 D 3.50bsc 0.140bsc D2 1.9 2.1 0.132 0.14 E 3.50bsc 0.140bsc E2 1.9 2.1 0.132 0.14 L 0.35 0.45 0.014 0.028 e 0.50BSC 0.020BSC R 0.08 - 0.003 - TOLERANCES OF FROM AND POSITION aaa 0.1 0.004 bbb 0.1 0.004 ccc 0.05 0.002 Land Pattern NOTES: 1. Compound dimension: 3.50×3.50; 2. Unit: mm; 3.General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. Tape and Reel Orientation
http://www.union-ic.com Rev.06 May.2012 1 2 / 1 3 UM3204 UM3204UE: TSSOP14 Outline Drawing DIMENSIONS Millimeters Inch Symbol Min Max Min Max A - 1.20 - 0.047 A1 0.05 0.15 0.002 0.006 A2 0.90 1.05 0.035 0.041 A3 0.34 0.54 0.013 0.021 D 4.86 5.06 0.191 0.199 E 6.20 6.60 0.244 0.260 E1 4.30 4.50 0.169 0.177 b 0.20 0.28 0.008 0.011 e 0.65BSC 0.026 Land Pattern NOTES: 1. Compound dimension: 4.96×4.40; 2. Unit: mm; 3.General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. Tape and Reel Orientation
http://www.union-ic.com Rev.06 May.2012 1 3 / 1 3 UM3204 IMPORTANT NOTICE The information in this document has been ca refully reviewed and is believed to be accurate. Nonetheless, this document is subjec t to change without notice. Union assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any update. Union rese rves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Union Semiconductor, Inc Add: 2F, No. 3, Lane 647 Songtao Road, Shanghai 201203 Tel: 021-51093966 Fax: 021-51026018 Website: www.union-ic.com