UM3156 UNIONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Features
z Sample-and-Hold Circuits z Battery powered Equipment z Audio and Video Signal Routing z Communication Circuits z Control Inputs Are 5V Tolerant z Low Charge Injection z Excellent ON-State Resistance Matching z Low Total Harmonic Distortion (THD) z 1.65V to 5.5V Single-Supply Operation z ESD Performance: Human Body Model＞2KV Machine Model＞200V z SC70-6/SC88/SOT363 Package z Pb-Free Package P i n C o n f i g u r a t i o n s T o p V i e w M: Monthly Code UM3156 SC70-6/SC88/SOT363
http://www.union-ic.com Rev.01 Dec.2009 2 / 9 UM3156
Ordering Information
Part Number Packaging Type Marking Code Shipping Qty UM3156 SC70-6/SC88/SOT363 U73 3000pcs/7 Inch Tape & Reel Function Table Select Input Function L B0 Connected to A H B1 Connected to A Absolute Maximum Ratings Symbol Parameter Limit Unit VCC Supply Voltage - 0.5 to + 6.5 VS DC Switch Voltage (Note 1) - 0.5 to (V CC + 0.5) VIN DC IN Voltage (Note 1) - 0.5 to + 6.5 V IIK DC Input Diode Current@ VIN＜0V -50 IOUT DC Output Current 128 ICC/ IGND DC V CC or Ground Current +100 mA TJ Junction Temperature Under Bias +150 TSTG Storage Temperature - 65 to +150 TL Junction Lead Temperature (Soldering, 10seconds) 260 θJA Thermal Resistance 350 °C/W PD Power Dissipation @ +85°C 180 mW 1: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Recommended Ratings (Note2) Symbol Parameter Limit Unit VCC Supply Voltage Operating 1.65 to 5.5 VIN Switch Input Voltage 0 to V CC VIN Select Input Voltage 0 to V CC VOUT Output Voltage 0 to V CC V TA Operating Temperature -55 to +125 °C tr, tf Input Rise and Fall Time Control Input Vcc=2.3V to 3.6V Control Input Vcc=4.5V to 5.5V 0 to 10 0 to 5.0 ns/V 2: Select input must be held HIGH or LOW, it must not float.
http://www.union-ic.com Rev.01 Dec.2009 3 / 9 UM3156
Electrical Characteristics
Limits (–40 to 85 °C) Symbol Parameter Test Conditions Vcc(V) Temp Min Typ Max Unit Analog Signal Range Vcc Full 0 V cc V IIN Input Leakage Current 0≤ VIN≤5 . 5 V 0 to 5.5 Room Full ± 0.05 ±0.1 μA IOFF OFF State Leakage Current 0≤ A, B≤V c c 1.65 to 5.5 Room Full ±0.05 ±0.1 μA 1.65 to 2.3 1.1 2.3 to 2.7 1.4 2.7 to 3.6 1.8 3.6 to 4.3 2.1 VIH Input High Voltage 4.3 to 5.5 Full 2.6 V 1.65 to 2.3 0.4 2.3 to 2.7 0.7 2.7 to 3.6 1.0 3.6 to 4.3 1.3 VIL Input Low Voltage 4.3 to 5.5 Full 1.5 V ICC Quiescent Supply Current VIN =Vcc or GND IO=0 5.5 Room Full 1.0 10 μA VIN = 0V, IO=30mA VIN = 2.4V, IO=-30mA VIN = 4.5V, IO=-30mA
4.5 Full
3.0 4.0 4.5 7.0 VIN = 0V, IO=24mA VIN = 3V, IO=-24mA 3.0 Full 4.0 6.0 9.0 VIN = 0V, IO=8mA VIN = 2.3V, IO=-8mA 2.3 Full 5.0 8.0 RON On-Resistance (Note3) VIN = 0V, IO=4mA VIN = 1.65V, IO=-4mA 1.65 Full 6.5 Ω IA=-30mA 0≤ VBn≤V c c 4.5 Full 25 IA=-24mA 0≤ VBn≤ Vcc 3.0 Full 50 IA=-8mA, 0≤ VBn≤V c c 2.3 Full 100 RRANGE On Resistance Over Signal Range (Note3,7) IA=-4mA, 0≤ VBn≤V c c 1.65 Full 300 Ω IA=-30mA, VBn = 3.15V 4.5 Room 0.15 IA=-24mA, VBn = 2.1V 3.0 Room 0.2 IA=-8mA, VBn = 1.6V 2.3 Room 0.5 ΔRON On Resistance Match Between Channels (Note3,4,5) IA=-4mA, VBn = 1.15V 1.65 Room 0.5 Ω IA=-30mA 0≤ VBn≤V c c 5.0 Room 6.0 IA=-24mA 0≤ VBn≤V c c 3.3 Room 12 IA=-8mA, 0≤ VBn≤V c c 2.5 Room 28 RFLAT On Resistance Flatness (Note3,4,6) IA=-4mA, 0≤ VBn≤V c c 1.8 Room 125 Ω
http://www.union-ic.com Rev.01 Dec.2009 4 / 9 UM3156 Electrical Characteristics (Continued) Limits (–40 to 85 °C) Symbol Parameter Test Conditions Vcc(V) Temp Min Typ Max Unit tPHL t PLH Propagation Delay Bus to Bus (Note 9) VI = OPEN 1.65 to1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 Full 1.5 1.0 0.8 ns tPZL tPZH Output Enable Time Turn On Time (A to Bn) VI = 2×VCC for tPZL VI = 0 V for tPZH 1.65 to1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 Full 7.0 3.5 2.5 1.5 8.6 6.2 ns tPLZ tPHZ Output Disable Time Turn Off Time (A Port to B Port) VI = 2×VCC for tPLZ VI = 0 V for tPHZ 1.65 to1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 Full 3.0 2.0 1.7 0.8 7.5 5.3 3.8 ns tD Break Before Make Time (Note 8) 1.65 to1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 Full 0.5 0.5 0.5 0.5 ns QINJ Charge Injection (Note 8) CL = 0.1 nF, VGEN = 0 V RGEN = 0Ω 5.0 3.3 Room 9.0 4.0 pC OIRR Off Isolation (Note 10) R L=50Ω, f = 10 MHz 1.65 to 5.5 Room -60 dB Xtalk Crosstalk R L=50Ω, f = 10 MHz 1.65 to 5.5 Room -54 dB BW -3 dB Bandwidth R L=50Ω 1.65 to 5.5 Room 230 MHz THD Total Harmonic Distortion (Note8) RL=600Ω 0.5VP-P f=600Hz to 20kHz 5.0 Room 0.011 % Capacitance CIN IN Pin Input Capacitance (Note11) VCC = 0V 2.5 pF CIO-B B Port Off Capacitance (Note11) VCC =5.0V 7.5 pF CIOA-ON A Port Capacitance when Switch is Enabled (Note11) VCC =5.0V 20.1 pF 3: Measured by the voltage drop between A and B pins at the i ndicated current through the switch. On Resistance is determined b y the lower of the voltages on the two (A or B Ports). 4: Parameter is characterized but not tested in production. 5: ΔRON = ︱RON (B0) − RON(B1) ︱measured at identical VCC, temperature and voltage levels. 6: Flatness is defined as the difference between the maximum a nd minimum value of On Resistan ce over the specified range of conditions. 7: Guaranteed by Design. 8: Guaranteed by Design. 9: This parameter is guaranteed by design but not tested. The bus switch contributes no propaga tion delay other than the RC del ay of the On Resistance of the switch and the 50 pF load capacitance, when driven by an ideal voltage source (zero output impedance). 10: Off Isolation = 20 log10 [V A/VBn]. 11: TA = +25, f = 1 MHz, Capacitance is characterized but not tested in production.
Figure 3. Break-Before-Make Timing
Figure 8. Bandwidth
http://www.union-ic.com Rev.01 Dec.2009 8 / 9 UM3156
Package Information
MILLIMETERS INCHES Symbol Min Max Min Max A 0.900 1.100 0.035 0.043 A1 0.000 0.100 0.000 0.004 A2 0.877 1.000 0.035 0.039 b 0.150 0.350 0.006 0.014 c 0.080 0.220 0.003 0.009 D 1.800 2.200 0.071 0.087 E 1.150 1.350 0.045 0.053 E1 2.000 2.450 0.079 0.096 e 0.650REF 0.026REF e1 1.200 1.400 0.047 0.055 L 0.488REF 0.020REF L1 0.260 0.460 0.010 0.018 θ 0° 8° 0° 8° Land Pattern NOTES: 1. Compound dimension: 2.10×1.25; 2. Unit: mm; 3.General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. Tape and Reel Orientation
http://www.union-ic.com Rev.01 Dec.2009 9 / 9 UM3156 IMPORTANT NOTICE The information in this document has been ca refully reviewed and is believed to be accurate. Nonetheless, this document is subjec t to change without notice. Union assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any update. Union rese rves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Union Semiconductor, Inc Add: 7F, No. 5, Bibo Road, Shanghai 201203 Tel: 021-51097928 Fax: 021-51026018 Website: www.union-ic.com