UGS2J GULFSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rev.A1 www.gulfsemi.com UGS2J THRU UGS2K SURFACE MOUNT SUPERFAST RECTIFIER VOLTAGE ：： ：：600V to 800V CURRENT ：： ：：2.0A Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260 ℃/10sec/at terminals Glass passivated chip Superfast recovery time for high efficiency MECHANICAL DATA Terminal ：Plated axial leads solderable per MIL-STD 202E, method 208C Case ：Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity ：color band denotes cathode Mounting position：any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25 ℃, unless otherwise stated) SYMBOL UGS2J UGS2K units Maximum Recurrent Peak Reverse Voltage Vrrm 600 800 V Maximum RMS Voltage Vrms 420 560 V Maximum DC blocking Voltage Vdc 600 800 V Maximum Average Forward Rectified Current 3/8 ″lead length at T L =120 ℃ If(av) 2.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Ifsm 50 A Maximum Forward Voltage at rated Forward current Vf 1.5 2.5 V Maximum DC Reverse Current Ta =25 ℃ at rated DC blocking voltage Ta =125 ℃ Ir 5.0 200.0 µA Maximum Reverse Recovery Time (Note 1) Trr 25 nS Typical Junction Capacitance (Note 2) Cj 25.0 pF Typical Thermal Resistance (Note 3) Rth(jl) 13 ℃/W Storage and Operating Junction Temperature Tstg,Tj -55 to +1 50 ℃ Note ： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area
Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UGS2J THRU UGS2K