UG12XT VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

UG12xT, UGF12xT, UGB12xT www.vishay.com Vishay General Semiconductor Revision: 24-Feb-16 1 Document Number: 88758 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 High Voltage Ultrafast Rectifier

FEATURES

  • Power pack
  • Glass passivated pellet chip junction
  • Ultrafast recovery time
  • Soft recovery characteristics
  • Low switching losses, high efficiency
  • High forward surge capability
  • Meets MSL level 1, per J-ST D-020, LF maximum peak of 245 °C (for TO-263AB package)
  • Solder dip 275 °C max., 10 s per JESD 22-B106 (for TO-220AC and ITO-220AC package)
  • AEC-Q101 qualified
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in high voltage and high frequency power factor correction, freewheeling diodes and secondary DC/DC rectification application. MECHANICAL DATA Case: TO-220AC, ITO-220AC, TO-263AB Molding compound meets UL 94V-0 flammab ility rating Base P/N-E3 - RoHS-co mpliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs max. PRIMARY CHARACTERISTICS IF(AV) 12 A VRRM 500 V to 600 V IFSM 135 A trr 30 ns VF at IF = 12 A 1.5 V TJ max. 150 °C Package TO-220AC, ITO-220AC, TO-263AB Diode variation Single die CASEPIN 2 PIN 1 TO-220AC UG12xT ITO-220AC UGF12xT UGB12xT PIN 1 PIN 2 K HEATSINK K PIN 2 PIN 1 TO-263AB MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL UG12HT UG12JT UNIT Max. repetitive peak reverse voltage V RRM 500 600 V Max. working reverse voltage V RWM 400 480 V Max. RMS voltage V RMS 350 420 V Max. DC blocking voltage V DC 500 600 V Max. average forward rectified current (fig. 1) I F(AV) 12 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 135 A Operating junction and storage temperature range T J, TSTG -55 to +150 °C Isolation voltage (ITO-220AC only) from terminals to heatsink t = 1 min VAC 1500 V

UG12xT, UGF12xT, UGB12xT www.vishay.com Vishay General Semiconductor Revision: 24-Feb-16 2 Document Number: 88758 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle Note (1) AEC-Q101 qualified ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL UG12HT UG12JT UNIT Max. instantaneous forward voltage (1) IF = 12 A T J = 25 °C VF 1.75 V IF = 12 A T J = 125 °C 1.50 Max. reverse current TJ = 25 °C IR 30 μA TJ = 125 °C 4.0 mA Max. reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 30 ns IF = 1.0 A, dI/dt = 50 A/μs,  VR = 30 V, Irr = 0.1 IRM trr 50 ns Typical softness factor (tb/ta) IF = 12 A, dI/dt = 240 A/μs,  VR = 400 V, Irr = 0.1 IRM S 0.9 - Max. reverse recovery current IF = 12 A, dI/dt = 96 A/μs,  VR = 400 V, TC = 125 °C IRM 7.5 A Peak forward recovery time IF = 12 A, dI/dt = 96 A/μs, VF = 1.1 V x VF max. tfr 500 ns THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL UG12 UGF12 UGB12 UNIT Typical thermal resistance from junction to case R ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PAC KAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC UG12JT-E3/45 1.80 45 50/tube Tube ITO-220AC UGF12JT-E3/45 1.95 45 50/tube Tube TO-263AB UGB12JT-E3/45 1.33 45 50/tube Tube TO-263AB UGB12JT-E3/81 1.33 81 800/reel Tape and reel TO-220AC UG12JTHE3/45 (1) 1.80 45 50/tube Tube ITO-220AC UGF12JTHE3/45 (1) 1.95 45 50/tube Tube TO-263AB UGB12JTHE3/45 (1) 1.33 45 50/tube Tube TO-263AB UGB12JTHE3/81 (1) 1.33 81 800/reel Tape and reel

UG12xT, UGF12xT, UGB12xT www.vishay.com Vishay General Semiconductor Revision: 24-Feb-16 3 Document Number: 88758 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Fig. 1 - Forward Current Derating Curve Fig. 2 - Max. Non-Repetitive Peak Forward Surge Current Fig. 3 - Typical Instantaneous Forward Characteristics Per Leg Fig. 4 - Typical Reverse Leakage Characteristics Per Leg Fig. 5 - Typical Junction Capacitance Per Leg Fig. 6 - Reverse Switching Characteristics Per Leg 0 25 50 75 100 125 150 Average Forward Current (A) Case Temperature (°C) UG12HT, UG12JT UGF12HT, UGF12JT 1 10 100 125 150 175 200 100 Peak Forward Surge Current (A) Number of Cycles at 60 Hz TJ = 125 °C 0.01 0.1 100 Instantaneous Forward Voltage (V) Instantaneous Forward Current (A) TJ = 100 °C TJ = 25 °C 0 20 40 60 80 100 100 1000 10 000 Instantaneous Reverse Leakage Current (µA) Percent of Rated Peak Reverse Voltage (%) TJ = 100 °C TJ = 125 °C TJ = 25 °C 1 10 100 100 Reverse Voltage (V) Junction Capacitance (pF) 25 50 75 100 100 150 200 250 300 350 400 125 trr Qrr Stored Charge/Reverse Recovery Time (nC/ns)

12 A, 240 A/µs, 400 V

1 A, 50 A/µs, 30 V

Junction Temperature (°C)

UG12xT, UGF12xT, UGB12xT www.vishay.com Vishay General Semiconductor Revision: 24-Feb-16 4 Document Number: 88758 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC CASEPIN 2 PIN 1 0.635 (16.13) 0.625 (15.87) 0.415 (10.54) MAX. 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) PIN 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 1.148 (29.16) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.350 (8.89) 0.330 (8.38) 0.145 (3.68) 0.135 (3.43) 0.603 (15.32) 0.573 (14.55) 0.055 (1.39) 0.045 (1.14) 0.185 (4.70) 0.175 (4.44) ITO-220AC PIN 1 2 0.025 (0.64) 0.015 (0.38) 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) REF. 0.076 (1.93) REF. 45° REF. 0.600 (15.24) 0.580 (14.73) 0.560 (14.22) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.191 (4.85) 0.171 (4.35) 0.057 (1.45) 0.045 (1.14) 0.671 (17.04) 0.651 (16.54) 0.028 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7° REF. 7° REF. 7° REF. 0.350 (8.89) 0.330 (8.38) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.110 (2.79) 0.100 (2.54) 0.190 (4.83) 0.170 (4.32) TO-263AB Mounting Pad Layout 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) MIN. 0.15 (3.81) MIN. 0.33 (8.38) MIN. 0.42 (10.66) MIN. K K 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN.

www.vishay.com Vishay Revision: 08-Feb-17 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED