BYV29-XXX_V01 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

BYV29-xxx, BYV29F-xxx, BYV29B-xxx, UG8xT, UGF8xT, UGB8xT www.vishay.com Vishay General Semiconductor Revision: 12-Jun-2019 1 Document Number: 88557 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Ultrafast Rectifier DESIGN SUPPORT TOOLS AVAILABLE

FEATURES

  • Power pack
  • Glass passivated pellet chip junction
  • Ultrafast recovery time
  • Low switching losses, high efficiency
  • Low forward voltage drop
  • High forward surge capability
  • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (D 2PAK (TO-263AB package))
  • Solder dip 275 °C max. 10 s, per JESD 22-B106 (for TO-220AC and ITO-220AC package)
  • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3  (for ITO-220AC and D2PAK (TO-263AB package))
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, DC/DC converters, and other power switching application. MECHANICAL DATA Case: TO-220AC, ITO-220AC, D2PAK (TO-263AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-co mpliant, commerical grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: as marked Mounting Torque: 10 in-lbs max. PRIMARY CHARACTERISTICS IF(AV) 8.0 A VRRM 300 V to 400 V IFSM 110 A trr 35 ns VF 1.03 V TJ max. 150 °C Package TO-220AC, ITO-220AC, D2PAK (TO-263AB) Circuit configurations Single CASEPIN 2 PIN 1 TO-220AC BYV29, UG8 Series ITO-220AC BYV29F, UGF8 Series BYV29B, UGB8 Series PIN 1 PIN 2 K HEATSINK K PIN 2 PIN 1 D2PAK (TO-263AB) 33DD3 D 3D Models MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL BYV29-300 BYV29-400 UNITUG8FT UG8GT Maximum repetitive peak reverse voltage V RRM 300 400 V Maximum working reverse voltage V RWM 300 400 V Maximum RMS voltage V RMS 210 280 V Maximum DC blocking voltage V DC 300 400 V Maximum average forward rectified current at TC = 100 °C I F(AV) 8.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 110 A Operating junction and storage temperature range T J, TSTG -40 to +150 °C Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min V AC 1500 V

BYV29-xxx, BYV29F-xxx, BYV29B-xxx, UG8xT, UGF8xT, UGB8xT www.vishay.com Vishay General Semiconductor Revision: 12-Jun-2019 2 Document Number: 88557 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle Note (1) AEC-Q101 qualified, available in ITO-220AC and TO-263AB package ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL BYV29-300, UG8FT BYV29-400, UG8GT UNIT Maximum instantaneous forward voltage IF = 8 A TJ = 25 °C VF (1) 1.25 VTJ = 150 °C 1.03 IF = 20 A T J = 25 °C 1.40 Maximum DC reverse current at VRRM TC = 25 °C IR 10 μATC = 100 °C 350 Maximum reverse recovery time I F = 0.5 A, IR = 1.0 A, Irr = 0.25 A t rr 35 ns Maximum reverse recovery time IF = 1.0 A, dI/dt = 100 A/μs, VR = 30 V, Irr = 0.1 IRM trr 50 ns Maximum reverse recovery current IF = 10 A, dI/dt = 50 A/μs, VR = 30 V, TC = 100 °C IRM 5.5 A Maximum recovered stored charged IF = 2 A, dI/dt = 20 A/μs, VR = 30 V, Irr = 0.1 IRM Qrr 55 nC THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL BYV29 UG8 BYV29F UGF8 BYV29B UGB8 UNIT Typical thermal resistance from junction to case R JC 2.5 5.5 2.5 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PAC KAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC BYV29-400-E3/45 1.80 45 50/tube Tube ITO-220AC BYV29F-400-E3/45 1.95 45 50/tube Tube D 2PAK (TO-263AB) BYV29B-400-E3/45 1.77 45 50/tube Tube D2PAK (TO-263AB) BYV29B-400-E3/81 1 .77 81 800/reel Tape and reel ITO-220AC BYV29F-400HE3_A/P (1) 1.95 P 50/tube Tube D2PAK (TO-263AB) BYV29B-400HE3_A/P (1) 1.77 P 50/tube Tube D2PAK (TO-263AB) BYV29B-400HE3_A/I (1) 1.77 I 800/reel Tape and reel

BYV29-xxx, BYV29F-xxx, BYV29B-xxx, UG8xT, UGF8xT, UGB8xT www.vishay.com Vishay General Semiconductor Revision: 12-Jun-2019 3 Document Number: 88557 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RATINGS AND CHARACTERISTICS CURVES (TC = 25 °C unless otherwise noted) Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Leakage Charateristics Fig. 5 - Reverse Switching Characteristics Per Leg Fig. 6 - Typical Junction Capacitance 755025 100 125 150 175 Average Forwar d Rectified Current (A) Case Temperature (°C) Resistive or Inductive Load 100 125 150 1 100 10 Number of Cycles at 60 Hz Peak Forwar d Surge Current (A) TC = 100 °C 8.3 ms Single Half Sine-Wave 0.01 0.1 100 Instantaneous Forward Voltage (V) In stantaneou s Forward Current (A) TJ = 125 °C TJ = 25 °C TJ = 100 °C 20 60 40 100 80 0.01 0.1 100 1000 Percent of Rated Peak Reverse Voltage (%) In stantaneou s Rever se Leakage Current (μA) TJ = 125 °C TJ = 25 °C TJ = 100 °C 25 50 100 120 140 160 75 100 125 Stored Charge/Reverse Recovery Time (nC/ns) Junction Temperature (°C) dI/dt = 150 A/μs dI/dt = 100 A/μs dI/dt = 150 A/μs dI/dt = 100 A/μs dI/dt = 50 A/μs dI/dt = 20 A/μs dI/dt = 20 A/μs trr Qrr 0.1 10 1 100 100 Reverse Voltage (V) Junction Capacitanc e (pF) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p

BYV29-xxx, BYV29F-xxx, BYV29B-xxx, UG8xT, UGF8xT, UGB8xT www.vishay.com Vishay General Semiconductor Revision: 12-Jun-2019 4 Document Number: 88557 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC CASEPIN 2 PIN 1 0.635 (16.13) 0.625 (15.87) 0.415 (10.54) MAX. 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) PIN 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 1.148 (29.16) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.350 (8.89) 0.330 (8.38) 0.145 (3.68) 0.135 (3.43) 0.603 (15.32) 0.573 (14.55) 0.055 (1.39) 0.045 (1.14) 0.185 (4.70) 0.175 (4.44) ITO-220AC PIN 1 2 0.025 (0.64) 0.015 (0.38) 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) REF. 0.076 (1.93) REF. 45° REF. 0.600 (15.24) 0.580 (14.73) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.191 (4.85) 0.171 (4.35) 0.057 (1.45) 0.045 (1.14) 0.671 (17.04) 0.651 (16.54) 0.028 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7° REF. 7° REF. 7° REF. 0.350 (8.89) 0.330 (8.38) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.110 (2.79) 0.100 (2.54) 0.190 (4.83) 0.170 (4.32) D2PAK (TO-263AB) Mounting Pad Layout 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) MIN. 0.15 (3.81) min. 0.33 (8.38) min. 0.42 (10.66) min. K K 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN.

www.vishay.com Vishay Revision: 01-Jan-2022 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED