UG1A GULFSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rev.A4 www.gulfsemi.com UG1A THRU UG1D ULTRAFAST EFFICIENT PLASTIC SILICON RECTIFIER VOLTAGE ：： ：：50 TO 200V CURRENT ：： ：： 1.0A FEATURE DO –41\\DO -- --204AL Low power loss High surge capability Glass passivated chip junction Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250 ℃/10sec/0.375 ″lead length at 5 lbs tension MECHANICAL DATA Terminal ：Plated axial leads solderable per MIL-STD 202E, method 208C Case ：Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity ：color band denotes cathode Mounting position：any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25 ℃, unless otherwise stated) SYMBOL UG UG UG UG 1D units Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 150 200 V Maximum RMS Voltage Vrms 35 70 105 140 V Maximum DC blocking Voltage Vdc 50 100 150 200 V Maximum Average Forward Rectified Current 3/8″lead length at Ta =75 ℃ If(av) 1.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Ifsm 40.0 A Maximum Forward Voltage at Forward current 1A Peak Vf 0.95 V Maximum DC Reverse Current Ta =25 ℃ at rated DC blocking voltage Ta =125 ℃ Ir 5.0 200.0 μA μA Maximum Reverse Recovery Time (Note 1) Trr 15 nS Typical Junction Capacitance (Note 2) Cj 7.0 pF Typical Thermal Resistance (Note 3) R(ja) 60.0 ℃/W Storage and Operating Junction Temperature Tstg,Tj -55 to +150 ℃ Note ： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8 ″lead length, P.C. Board Mounted
RATINGS AND CHARACTERISTIC CURVES UG1A THRU UG1D 1 Rev.A4 www.gulfsemi.com