UG18XCT VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

UG18xCT, UGF18xCT, UGB18xCT www.vishay.com Vishay General Semiconductor Revision: 24-Feb-16 1 Document Number: 88759 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Dual Common Cathode Ultrafast Plastic Rectifier

FEATURES

  • Power pack
  • Glass passivated pellet chip junction
  • Ultrafast recovery time
  • Low switching losses, high efficiency
  • Low forward voltage drop
  • High forward surge capability
  • Meets MSL level 1, per J-ST D-020, LF maximum peak of 245 °C (for TO-263AB package)
  • Solder dip 275 °C max., 10 s per JESD 22-B106 (for TO-220AB and ITO-220AB package)
  • AEC-Q101 qualified
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, DC/DC converters, and other power switching application. MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Molding compound meets UL 94V-0 flammab ility rating Base P/N-E3 - RoHS-co mpliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) 18 A VRRM 50 V to 200 V IFSM 175 A trr 20 ns VF at IF 0.95 V TJ max. 150 °C Package TO-220AB, ITO-220AB, TO-263AB Diode variations Common cathode CASE PIN 2PIN 1 PIN 3 TO-220AB UG18xCT Series ITO-220AB UGF18xCT Series UGB18xCT Series PIN 1 PIN 2 K HEATSINK K PIN 2PIN 1 PIN 3 TO-263AB 1 2 3 MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL UG18ACT UG18BCT UG18CCT UG18DCT UNIT Max. repetitive peak reverse voltage V RRM 50 100 150 200 V Max. RMS voltage V RMS 35 70 105 140 V Max. DC blocking voltage V DC 50 100 150 200 V Max. average forward rectified current at TC = 105 °C I F(AV) 18 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 175 A Operating junction and storage temperature range T J, TSTG -65 to +150 °C Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min VAC 1500 V

UG18xCT, UGF18xCT, UGB18xCT www.vishay.com Vishay General Semiconductor Revision: 24-Feb-16 2 Document Number: 88759 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle Note (1) AEC-Q101 qualified ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBO L UG18ACT UG18BCT UG18CCT UG18DCT UNIT Max. instantaneous forward voltage per diode (1) 9.0 A TJ = 100 °C V F 1.1 V 20 A 1.2 5.0 A 0.95 Max. DC reverse current at rated DC blocking voltage  per diode T A = 25 °C I R 10 μA TA = 100 °C 300 Max. reverse recovery time  per diode IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A t rr 20 ns Max. reverse recovery time  per diode IF = 9.0 A, VR = 30 V,  dI/dt = 50 A/μs, Irr = 10 % IRM TJ = 25 °C trr ns TJ = 100 °C 50 Max. stored charge per diode IF = 9.0 A, VR = 30 V,  dI/dt = 50 A/μs, Irr = 10 % IRM TJ = 25 °C Qrr nC TJ = 100 °C 45 Typical junction capacitance per diode at 4.0 V, 1 MHz C J 30 pF THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL UG18 UGF18 UGB18 UNIT Typical thermal resistance from junction to case per diode R ORDERING INFORMATION (EXAMPLE) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PAC KAGE CODE BASE QUAN TITY DELIVERY MODE TO-220AB UG18DCT-E3/45 1.85 45 50/tube Tube ITO-220AB UGF18DCT-E3/45 2.00 45 50/tube Tube TO-263AB UGB18DCT-E3/45 1.35 45 50/tube Tube TO-263AB UGB18DCT-E3/81 1.35 81 800/reel Tape and reel TO-220AB UG18DCTHE3/45 (1) 1.85 45 50/tube Tube ITO-220AB UGF18DCTHE3/45 (1) 2.00 45 50/tube Tube TO-263AB UGB18DCTHE3/45 (1) 1.35 45 50/tube Tube TO-263AB UGB18DCTHE3/81 (1) 1.35 81 800/reel Tape and reel

UG18xCT, UGF18xCT, UGB18xCT www.vishay.com Vishay General Semiconductor Revision: 24-Feb-16 3 Document Number: 88759 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Fig. 1 - Forward Current Derating Curve Fig. 2 - Max. Non-Repetitive Peak Forward Surge Current Per Diode Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode Fig. 4 - Typical Reverse Leakage Characteristics Per Diode Fig. 5 - Reverse Switching Characteristics Per Diode Fig. 6 - Typical Junction Capacitance Per Diode 0 25 50 75 100 125 150 175 Average Forward Current (A) Case Temperature (°C) Resistive or Inductive Load 1 10 100 100 1000 TC = 105 °C 8.3 ms Single Half Sine-Wave Number of Cycles at 60 Hz Peak Forward Surge Current (A) 0.01 0.1 100 Instantaneous Forward Voltage (V) Instantaneous Forward Current (A) TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 0 20 40 60 80 100 0.01 0.1 100 1000 Percent of Rated Peak Reverse Voltage (%) Instantaneous Reverse Leakage Current (µA) TJ = 100 °C TJ = 125 °C TJ = 25 °C 0 25 50 75 100 125 150 175 Junction Temperature (°C)

150 A/µs

100 A/µs

20 A/µs

50 A/µs

dI/dt = IF = 9.0 A VR = 30 V Stored Charge/Reverse Recovery Time (nC/ns) 0.1 1 10 100 100 Reverse Voltage (V) Junction Capacitance (pF) TJ = 125 °C f = 1.0 MHz V sig = 50 mVp-p

UG18xCT, UGF18xCT, UGB18xCT www.vishay.com Vishay General Semiconductor Revision: 24-Feb-16 4 Document Number: 88759 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.113 (2.87) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) 0.415 (10.54) max. 0.635 (16.13) 0.625 (15.87)PIN 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.035 (0.90) 0.028 (0.70) 0.154 (3.91) 0.148 (3.74) 13 2 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) ITO-220AB 0.076 (1.93) REF. 45° REF. PIN 321 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) REF. 0.600 (15.24) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.191 (4.85) 0.171 (4.35) 0.671 (17.04) 0.651 (16.54) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.057 (1.45) 0.045 (1.14) 0.028 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7° REF. 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.110 (2.79) 0.100 (2.54) 0.190 (4.83) 0.170 (4.32) 7° REF. 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.350 (8.89) 0.330 (8.38) D2PAK (TO-263AB) Mounting Pad Layout 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) MIN. 0.15 (3.81) min. 0.33 (8.38) min. 0.42 (10.66) min. K K 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN.

www.vishay.com Vishay Revision: 08-Feb-17 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED