UG06A TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen Plastic package has Underwriters Laboratories Flammability Classification 94V-0 /cuspopen Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes /cuspopen Ultrafast recovery time for high efficiency /cuspopen Excellent high temperature switching /cuspopen Glass passivated junction /cuspopen High temperature soldering guaranteed: 260℃/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension Mechanical Data /cuspopen Cases: Void free molded plastic body over glass passivated chip /cuspopen Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 /cuspopen Polarity: Color band denotes cathode end /cuspopen Mounting position: Any /cuspopen Weight: 0.0064 ounce, 0,181 gram TS-1 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 ℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol UG06A UG06B UG06C UG06D Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 V Maximum RMS Voltage VRMS 35 70 105 140 V Maximum DC Blocking Voltage VDC 50 100 150 200 V Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @T L = 75℃ I(AV) 0.6 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) @T L = 75℃ IFSM 40 A Maximum Instantaneous Forward Voltage @ 0.6A VF 0.95 V Maximum DC Reverse Current @ T A=25℃ at Rated DC Blocking Voltage @ T A=100℃ IR 5.0 100 uA uA Maximum Reverse Recovery Time ( Note 1 ) Trr 15 nS Typical Junction Capacitance ( Note 2 ) Cj 9.0 pF Typical Thermal Resistance ( Note 3 ) RθJA RθJL 28 ℃/W Operating Temperature Range TJ -55 to +150 ℃ Storage Temperature Range TSTG -55 to +150 ℃ Notes: 1. Reverse Recovery Test Conditions: I F=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Thermal Resistance from Junction to Ambient at 0.375” (9.5mm) Lead Length. Mount on Cu-Pad Size 0.2” x 0.2” (5mm x 5mm) on PCB.
- 363 - FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT .( A ) 0.01 RATINGS AND CHARACTERISTIC CURVES (UG06A THRU UG06D) FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT .( A ) 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 0.01 1000 0.1 0.1 FIG.5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 0.1 1 10 100 100 REVERSE VOLTAGE. (V) Tj=25 C f=1.0MHz Vsig=50mVp-p FORWARD VOLTAGE. (V) Tj=100 C0 Tj=500C Tj=100 C0 100 Tj=50 C0 Pulse Width=300 s 1% Duty Cycle FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD RECTIFIED CURRENT AMPERES TEMPERATURE. ( C) o 0.15 0.3 0.45 0.6 0.75 0.9 25 50 75 100 125 150 175 Resistive or Inductive Load 0.375" (9.5mm) Lead Length TA, AMBIENT TEMPERATURE P.C.B. MOUNTED 0.7 x 0.7" (8x8mm) COPPER PAD TL=75 C 8.3ms Single Half Sine Wave JEDEC Method 100 100 TL, Lead Temperature