UFUFB-6 L-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- Reliable performance from DC ~ 3 GHz
- Bi-directional protection
- Protector will pass DC
- Replaceable gas tube element
- Optional 90V, 230V and 350V gas tubes available
Description
Lightning Protector Model AL -UFUFB-6 is a gas discharge tube suppressor featuring wide- band operation up to 3 GHz. This unit features a UHF -Female (Type SO239) to UHF -Female (Type SO239) Bulkhead connector with a rubber O-ring seal for mounting through an enclosure wall. Due to its low cost and superior RF performance, this unit is ideal for Mobile Radio Equipment hookups between antennas and transmitters/receivers, and for CB Comm unication Systems, such as: Public Address Systems, Civil Defense, Ground Control Apparatus, Ship-to-Shore Communications, CCTV, Landing Systems. Since this protector will pass DC, it is suitable for applications where DC is carried through the coax cable, such as remote amplifiers and LNAs. Both connector ports of this unit are equally protected. This provides protection no matter which way it is installed. Either port can face the antenna or either port can face the equipment. The unit's replaceable gas tube element, multi-strike capability, and fast response time make it suitable for a wide range of applications. A ground lug and terminal are supplied directly on the lightning protector housing, which provides superior grounding. Replacement gas tube elements are available on the L-com web site.
L-com, Inc. 50 High St., West Mill, 3rd Floor, Suite #30 North Andover, MA 01845 www.L-com.com E-mail: sales@L-com.com Phone: 1-800-343-1455 Fax: 1-978-689-9484 © L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks. Specifications Electrical Specifications Frequency Range 0 – 3 GHz VSWR 1:1.3 Max. (0 – 3 GHz) Insertion Loss 0.4 dB Max. (0 – 3 GHz) Impedance 50 Ohm Gas Tube Element: DC Breakdown Voltage Indicated 600V 20% Gas Tube Impulse Breakdown Voltage 1000V 20% Gas Tube Insulation Resistance 10,000 MΩ Maximum Withstand Current 5 KA RF Power Rating Voltage Rating DC ~ 30 MHz 30 ~ 500 MHz 500 MHz ~ 3 GHz PEP1 CW2 PEP1 CW2 PEP1 CW2
600 Volt 2KW 1KW 800W 400W 320W 160W
Notes: 1 - Peak Envelope Power (PEP): The average power supplied to the antenna transmission line by a transmitter during one radio frequency cycle at the crest of the modulation envelope taken under normal operating conditions. 2 - Continuous Wave (CW): A wave of constant amplitude and constant frequency. Mechanical Specifications Connectors UHF-Female (Type SO239) to UHF-Female (Type SO239) Bulkhead Connector Body Material Nickel Plated Brass Body Material Aluminum Pin Material Gold Plated Brass O-Ring Material Rubber Ground Lug 10 AWG Max. Dimensions (L x H x W) 3.2 x 1.6 x 0.8 in. (82 x 40 x 20mm) Weight 3.17 oz (89.8g) RoHS Compliant Yes