UFS1200 GULFSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rev.A1 www.gulfsemi.com UFS1200 SURFACE MOUNT FAST SWITCHING RECTIFIER FEATURE SMA ／／ ／／DO-214AC Low power loss High surge capability Glass passivated chip junction Fast recovery time for high efficiency High temperature soldering guaranteed 260 ℃/10sec/at terminals MECHANICAL DATA Terminal ：Plated axial leads solderable per MIL-STD 202E, method 208C Case ：Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity ：color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25 ℃, unless otherwise stated) SYMBOL UFS1200 units Maximum Recurrent Peak Reverse Voltage Vrrm 1200 V Maximum RMS Voltage Vrms 840 V Maximum DC blocking Voltage Vdc 1200 V Maximum Average Forward Rectified Current 3/8 ″lead length at Ta =55 ℃ If(av) 1.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Ifsm 30.0 A Maximum Forward Voltage at Forward current 1A Peak Vf 1.5 V Maximum DC Reverse Current Ta =25° C at rated DC blocking voltage Ta =125° C Ir 10.0 100.0 µA Maximum Reverse Recovery Time (Note 1) Trr 100 nS Typical Junction Capacitance (Note 2) Cj 17.0 pF Typical Thermal Resistance (Note 3) Rth(jl) 30 ℃/W Storage and Operating Junction Temperature Tstg,Tj -55 to + 150 ℃ Note ： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area
Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UFS1200