UFR1610 DAESAN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Plastic package has Underwriters Laboratory Flammability Classification 94V-0
  • Low forward voltage drop
  • High current capability
  • High reliability
  • Low power loss, high effciency
  • High surge current capability
  • High speed switching
  • Low leakage Maximum Ratings And Electrical Characteristics
  • Case : JEDEC ITO-220 molded plastic body
  • Terminals : Lead solderable per MIL-STD-750, method 2026
  • Polarity : As marked
  • Mounting Position : Any
  • Weight : 0.08 ounce, 2.24 gram (Ratings at 25℃ ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) CURRENT 16.0 Amperes VOLTAGE 50 to 600 Volts Notes: (1) Test conditions: IF=0.5A, IR=1.0A, Irr=0.25A. (2) Measured at 1MHz and applied reverse voltage of 4.0 Volts. (3) Thermal resistance from junction to case mounting on heatsink. Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Volts Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) VDC Maximum average forward rectified current 0.375"(9.5mm) lead length @ at TA=100℃ Maximum instantaneous forward voltage at 8.0A VRRM Volts Symbols Units 1.3 VF VRMS 16.0 Amps Amps IFSM TJ TSTG -55 to +150 -55 to +150 ℃/W Volts Maximum DC reverse current at rated DC blocking voltage TA=25℃ Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Typical thermal resistance (Note 3) Operating junction and storage temperature range 100 UFR 1610 100 10.0 Volts μA ns pF I(AV) IR Trr 2.2 CJ Maximum DC reverse current at rated DC blocking voltage TA=125℃ 200 100 1.7 1.0 200 UFR 1620 140 200 300 UFR 1630 210 300 400 UFR 1640 280 400 500 UFR 1650 350 500 600 UFR 1660 420 600 RθJC Dimensions in inches and (millimeters) ITO-220 2.54 13Min PIN 1 PIN 1 PIN 3 PIN 3 PIN 2 PIN 2 CASE CASE Positive CT Suffix "C" Negative CT Suffix "A" 0.2 3.7 0.2 0.7 0.2 2.54 0.2 1.3 0.2 2.7 0.2 15 0.3 10 0.5 3.2 0.2 0.1 6.4 0.1 2.7 0.2 4.5 0.2 0.5 0.2 2.4 0.2

RATINGS AND CHARACTERISTIC CURVES UFR1610 THRU UFR1660 FIG . 1 -REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM trr 1cm NONINDUCTIVE NONINDUCTIVE DUT OSCILLOSCOPE (NOTE 2 ) (+ ) 50Vdc (approx) (-) NOTES: 1 . RISE TIME = 7ns max. INPUT IMPEDANCE= 1 MEGOHM 22p 2 . RISE TIME = 10ns max. SOURSE IMPEDANCE = 50ohmsf +0.5A -1.0A SET TIME BASE FOR 5/ 10ns / cm NONINDUCTIVE FIG . 2 -MAXIMUM AVERAGE FOR WARDCURRENT DERATING AVERAGE FORWARD CURRENT . (A ) 0 0 50 100 150 FIG . 3 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRET . ( ) A 100 120 140 1000 100 0.1 O Tj=125 C PERCENT OF RATED PEAK REVERSE VOLTAGE . (%) CASE TEMPERATURE . ( % ) O Tj=25 C FIG . 4 - MAXIMUM NON - REPETITIVE FORWARD SURGE CURRENT 1 2 5 10 20 50 1 00 120 NMBER OF CYCLES AT 60Hz FIG . 6 - TYPICAL FRWARD CHARACTERISTICS 100 3.0 1.0 0.3 0.1 0.03 .01 FORWARD VOLTAGE . ( V ) FIG . 5 - TYPICAL JUNCTIOON CAPACITANCE PER LEG 1 2 5 10 20 50 100 200 500 1000 200 160 120 REVERSE VOLTAGE . ( V ) PEA K FO RWA R D SU R G E C U R R EN T . ( A ) CAPACITANCE ( pF) INSTANTANEOUS FORWARD CURRENT . ( A) PULSE GENERATOR ( NOTE 2 ) -0.25A UFR1610-1640 UFR1660 UFR1660 UFR1650 UFR1610-1650 8.3ms Single Half Sine Wave JEDEC Method o Tj=25 C o Tj=25 C o Tj=25 C Pulse Width=300 s 1% Duty Cycle 240