UF5400 DAESAN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Plastic package has Underwriters Laboratory Flammability Classification 94V-0
  • Low forward voltage drop
  • High current capability
  • High reliability
  • Low power loss, high effciency
  • High surge current capability
  • High speed switching
  • Low leakage Maximum Ratings And Electrical Characteristics
  • Case : JEDEC DO-201AD molded plastic body
  • Epoxy : UL94V-0 rate flame retardant
  • Lead : Plated axial lead solderable per MIL-STD-750, method 2026
  • Polarity : Color band denotes cathode end
  • Mounting Position : Any
  • Weight : 0.042 ounce, 1.19 gram (Ratings at 25¡É ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) CURRENT 3.0 Amperes VOLTAGE 50 to 1000 Volts Notes: (1) Test conditions: IF=0.5A, IR=1.0A, Irr=0.25A. (2) Measured at 1MHz and applied reverse voltage of 4.0 Volts. Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Volts Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) VDC Maximum average forward rectified current 0.375"(9.5mm) lead length at TA=50¡É Maximum instantaneous forward voltage at 3.0A VRRM Volts Symbols Units 1.3VF VRMS 3.0 Amps Amps IFSM TJ TSTG -65 to +150 ¡É Volts Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Operating junction and storage temperature range UF 5400 10.0 Volts ¥ìA ns pF I(AV) IR Trr 70CJ 100 UF 5401 100 200 UF 5402 140 200 400 UF 5404 280 400 600 UF 5406 420 600 800 UF 5407 560 800 1000 UF 5408 700 1000 Maximum full load reverse current full cycle average. 0.375"(9.5mm) lead length at TL=55¡É 200.0 150 1.71.0 300 UF 5403 210 300 150.0 Dimensions in inches and (millimeters) DO-201AD 1.0(25.4) MIN. 1.0(25.4) MIN. 0.375(9.5) 0.285(7.2) 0.042(1.1) 0.037(0.9) DIA. 0.210(5.3) 0.188(4.8) DIA.

FIG.1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC PULSE GENERATOR (NOTE2) OSCILLOSCOPE (NOTE1) NON IN- DUCTIVE 50W NON INDUCTIVE 10W NON INDUCTIVE D.U.T. 25Vdc (APPROX) ( + ) Trr 1cm SET TIME BASE FOR 10/20 ns/cm NOTES : 1.Rise Time=7ns max. input impedance=1 megohm 22pF 2.Rise Time=10ns max. source impedance = 50 ohms -1.0A +0.5A -0.25A ( ) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT (AMPERES) 0.01 100 0.1 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 50\\100\\200\\300\\400V TJ=25¡É PULSE WIDTH=300mS 1% DUTY CYCLE 600\\800\\1000V FIG.5-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT (AMPERES) 1 5 1005010 100 200 300 8.3m SINGLE HALF SINE WAVE (JEDEC Method) FIG6-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE. (V) JUNCTION CAPACITANCE (pF) 100.1 0.2 4 200.4 21 40 100 TJ=25¡É 100 200 UF5406-UF5408 UF5400-UF5404 UF5406-UF5408 UF5400-UF5404 FIG.4-TYPICAL REVERSE CHARACTERISTICS PERCENT OF RATED PEAK REVERSE VOLTAGE (%) INSTANTANEOUS REVERSE CURRENT (mA) 1000 20 120806040 140 TJ=25¡É TJ=100¡É TJ=150¡É 0.01 1.0 100 0.1 1000 FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE 1250 25 1501007550 175 AVERAGE FORWARD CURRENT (A) AMBIENT TEMPERATURE (¡É) SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5mm) LEAD LENGTH 3.0 2.0 1.0 6.0 5.0 4.0 RATINGS AND CHARACTERISTIC CURVES UF5400 THRU UF5408