UF4007

UF4001 GE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

ULTRAFAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage -50 to 1000 Volts Forward Current -1.0 Ampere

FEATURES

♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ 1.0 ampere operation at TA=55°C with no thermal runaway ♦ Glass passivated chip junction ♦ Low cost ♦ Ultrafast recovery time for high efficiency ♦ Low forward voltage ♦ Low leakage current ♦ High surge current capability ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-204AL molded plastic body over passivated chip Terminals:Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.012 ounce, 0.3 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified.. UF UF UF UF UF UF UF SYMBOLS 4001 4002 4003 4004 4005 4006 4007 UNITS Maximum repetitive peak reverse voltage V RRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage V RMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on I FSM 30.0 Amps rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A V F 1.0 1.7 Volts Maximum DC reverse current T A=25°C 10.0 at rated DC blocking voltage T A=100°C I R 50.0 µA Maximum reverse recovery time (NOTE 1) trr 50.0 75.0 ns Typical junction capacitance (NOTE 2) C J 17.0 pF Typical thermal resistance (NOTE 3) R Θ JA 60.0 R Θ JL 15.0 °C/W Operating junction and storage temperature range T J, TSTG - 55 to +150 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts 0.107 (2.7) 0.080 (2.0) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 1.0 (25.4) MIN. 0.205 (5.2) 0.160 (4.1) DIA. NOTE: Lead diameter is for suffix "E" part numbers0.026 (0.66) 0.023 (0.58) DO-204AL Dimensions in inches and (millimeters)

1.0 20 40 60 80 100 120 140 160 0.5 11 0 1 0 0 5.0 0.1 1 10 100 100 0.001 0.01 0.1 02 0 4 0 6 0 8 0 1 0 0 0.01 0.1 100 RATINGS AND CHARACTERISTIC CURVES UF4001 THRU UF4007 FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE AMBIENT TEMPERATURE, °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF REVERSE VOLTAGE, VOLTS TA=55°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=125°C TJ=125°C TJ=25°C TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH TJ=100°C UF4001-UF4004 UF4005-UF4007 TJ=100°C UF4001 - UF4004 UF4005 - UF4007 TJ=25°C f=1.0 MHz Vsig=50mVp-p