UF204-2C2A-2CDO-15 DGNJDZ | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

2.0 AMP HIGH EFFICIENCY RECTIFIERS

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at Ta=55 C

FEATURES

Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 2.0A Maximum DC Reverse Current Tj=25 C at Rated DC Blocking Voltage Tj=100 C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range Tj, TSTG 2.0 1.0 1.1 1.7 500 50 75 -55 +150 V A A V uA uA nS pF C NOTES: 1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. * Low forward voltage drop * High current capability * High reliability * High surge current capability * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Axial leads, solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end * Mounting position: Any Weight: 0.40 grams* UF200 UF201 UF202 UF204 UF206 UF208 UF2010 UNITS 50 100 200 400 600 800 1000 50 100 200 400 600 800 1000 35 70 140 280 420 560 700 V V * High speed switching Dimensions in inches and (millimeters) DO-15 1.0(25.4) MIN. 1.0(25.4) MIN. .300(7.6) .230(5.8) .034(.9) .028(.7) DIA. .140(3.6) .104(2.6) DIA. VOLTAGE RANGE 50 to 1000 Volts CURRENT

2.0 Amperes

  • Both normal and Pb free product are available: * Normal:80~95%Sn,5~20%Pb * Pb free:99 Sn above can meet Rohs enviroment substance directive request

.01 1.0 RATING AND CHARACTERISTIC CURVES (UF200 THRU UF2010) CHARACTERISTICS FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.5-TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS FORWARD CURRENT,(A) FORWARD VOLTAGE,(V) Pulse Width 300us 1% Duty Cycle 100 (+) (+) 25Vdc (approx.) ( ) ( ) PULSE GENERATOR (NOTE 2) OSCILLISCOPE (NOTE 1) NON- INDUCTIVE W NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. +0.5A -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm trr D.U.T. FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS NONINDUCTIVE NONINDUCTIVE W W Tj=25 C FIG.2-TYPICAL FORWARD CURRENT AVERAGE FORWARD CURRENT,(A) 0.4 0.8 1.2 1.6 2.0 2.4 DERATING CURVE 1.6 1.8 UF2 06~U 010 UF204 UF200~UF202 REVERSE VOLTAGE,(V) JUNCTION CAPACITANCE,(pF) 175 150 125 100 .01 .05 .1 .5 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz 1 10 5 50 100 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method Single Phase Half Wave 60Hz Resistive Or Inductive Load 0.375"(9.5mm) Lead Length 0 25 50 75 100 125 150 175 FIG.1-TYPICAL FORWARD AMBIENT TEMPERATURE ( C) PEAK FORWARD SURGE CURRENT,(A)