DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
ULTRAFAST SWITCHING RECTIFIER VOLTAGE - 50 to 800 Volts CURRENT - 10.0 Amperes
FEATURES
‧Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound ‧Exceeds environmental standards of MIL-S-19500/228 ‧Low power loss, high efficiency ‧Low forward voltage, high current capability ‧High surge capacity ‧Ultra Fast recovery times, high voltage High temperature soldering : 260‧ OC / 10 seconds at terminals ‧Pb free product at available : 99% Sn above meet RoHS environment substance directive request MECHANCALDATA ‧Case: TO-220AC molded plastic ‧Terminals: Lead solderable per MIL-STD-202, Method 208 ‧Polarity: As marked ‧Mounting Position: Any ‧Weight: 0.08 ounce, 2.24 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 OC J ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% TYPE NUMBER UF1000 UF1001 UF1002 UF1003 UF1004 UF1006 UF1008 UNITS Maximum Recurrent Peak Reverse Voltage 50 100 200 300 400 600 800 V Maximum RMS Voltage 35 70 140 210 280 420 560 V Maximum DC Blocking Voltage 50 100 200 300 400 600 800 V Maximum Average Forward Rectified Current .375”(9.5mm) lead length @ TC=100 A 0 1 Peak Forward Surge Current, 8.3ms single half sine wave superimposed on rated load(JECEC method) A 0 5 1 Maximum Instantaneous Forward Voltage at 10.0A 1.0 1.3 1.7 V Maximum DC Reverse Current @T A=25 at Rated DC Blocking Voltage @T A=125 10.0 500 μA μA Maximum Reverse Recovery Time(Note 1) 50 75 ns Typical Junctioncap acitance (Note 2) 80 50 pF Typical Junction Resi stance (Note 2) RөJA 15 Operating and Storage Temperature Range TJ,TSTG -55 to +150 NOTES: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1A, Irr=0.25A 2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC TO-220AC Unit:inch(mm) .419(10.66) MAX .196(5.0) .163(4.16) .054(1.39) .045(1.15) .114(2.9) .098(2.5) .025(0.65) MAX .139(3.55) .MIN DIA PIN1 3 2 .177(4.5) .MAX .038(0.96) .019(.5) .100(2.54) .624(15.87) .548(13.93) .50(12.7) MAX .269(6.85) .226(5.75) DATA SHEET UF1000~UF1008SEMICONDUCTOR http://www.yeashin.com 1 REV.02 20110725 °C/W SYMBOL VF IR TSTG
RATING AND CHARACTERISTIC CURVES UF1000~UF1008 http://www.yeashin.com 2 REV.02 20110725 RATING AND CHARACTERISTIC CURVES UF1000 THRU UF1008 NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF 2.Rise Time = 10ns max. Source Impedance = 50 Ohms trr +0.5A -0.25 -1.0 SET TIME 1cm BASE FOR 50 ns/cm Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 0 50 100 150 CASE TEMPERATURE, Fig. 1-TYPICAL FORWARD CURRENT DERATING CURVE 1000 100 1.0 0.1 20 40 60 80 100 120 140 TJ = 125 TJ = 25 PERCENT OF RATED PEAK REVERSE VOLTAGE Fig. 2-TYPICAL REVERSE CHARACTERISTICS 150 120 1 2 5 10 20 50 100 TJ = 125 8.3ms SINGLE HALF SINCE- WAVE JEDEC METHOD NUMBER OF CYCLES AT 60Hz Fig. 3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 210 200 160 120 1 2 5 20 50 100 200 500 UF1000 UF1008 REVERSE VOLTAGE, VOLTS 8 0 4 0 2 0 1 0 3 .0 1 .0 0 .3 0 .1 0.0 3 0.0 1 UF1000 UF1008 FORWARD VOLTAGE, VOLTS Fig. 4-TYPICAL JUNCTION CAPACITANCE Fig. 5-TYPICAL FORWARD CHARACTERISTICS PEAK FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES PEAK FORWARD CURRENT AMPERES CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A)