DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

ULTRAFAST SWITCHING RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere

FEATURES

  • Plastic package has Underwriters Laboratory Flame Retardant Epoxy Molding Copound
  • 1.0 ampere operation at TA=55 with no thermal runaway
  • Ultra fast switching for high efficiency High •
  • Pbfree pr oduc t at available : 99% MECHANICAL DATA
  • Case: Molded plastic, DO-41
  • Terminals: Axial leads, solderable per MIL-STD-202, Method 208
  • Polarity: Band denotes cathode
  • Mounting Position: Any
  • Weight: 0.013 ounce, 0.3 gram MAXIMUM RATINGS AND ELE CTRICAL CHARACTERISTICS Ratings at 25 J ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. UF100 UF101 UF102 UF104 UF106 UF108 UF1010 UNITS 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 600 800 1000 V 1.0 A 30.0 A 1.00 1.30 1.50 1.70 V 100 µA µA 17.0 pF 60.0 Reverse Recovery Time IF=.5A, IR=1A, Irr=.25A 50 75 ns Operating and Storage Temperature Range -55 to +150 NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC .034 (.86) .028 (.71) .205 (5.2) .160 (4.1) .107 (2.7) .080 (2.0) DIA. DIA. DO-41 Unit:inch(mm) 1.0 (25.4) MIN. 1.0 (25.4) MIN. DATA SHEET UF100~UF1010SEMICONDUCTOR http://www.yeashin.com 1 REV.02 20110725 Flammability Classification 94V-O utilizing Class passivaeed Jumction In DO-41 Package Exceeds environmental standards at terminals temperature soldering: 260°C Sn above meet RoHS environment substance directive request CHARACTERISTICS Maximum Recurrent Peak Reverse V oltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Recti fied Current @TL =75°C Peak For ward Surge Current 8.3ms single half sine- wave super imposed on rated load (JEDEC METHOD) Maximum f orward Voltage at 1.0A DC Maximum DC Reverse Current @TJ =25 at RatedDC Blocking Voltage @TJ =100 Maximum Reverse Recovery Time (Note 1) Typical Junction Resistance(Note 2)R JA□ TSTG TRR RθJL CJ IR SYMBOL °C/W VF

RATING AND CHARACTERISTIC CURVES NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22 pF 2.Rise Time = 10ns max. Source Impedance = 50 Ohms t rr +0.5A -0.25 -1.0 SET TIME 1cm BASE FOR 50 ns/cm Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 0.1 0.01 UF1010 TJ = 25 UF100 TYPICAL FORWARD VOLTAGE-VFM(Vpk) 1.2 1.0 0.8 0.6 0.4 0.2 25 50 75 100 125 150 175 SINGLE PHASE HALF WAVE 60Hz RESISSTIVE OR INDUCTIVE LOAD .375" LEAD LENGTHS AMBIENT TEMPERATURE, Fig. 2-FORWARD CHARACTERISTICS Fig. 3-FORWARD CURRENT DERATING CURVE 100 0.1 1 10 100 TJ = 25 f = 1.0MHz Vsig = 50m Vp-p REVERSE VOLTAGE, VOLTS .1 .5 1 2 5 10 20 50 100 200 500 1000 NUMBER OF CYCLES AT 60Hz Fig. 4-TYPICAL JUNCTION CAPACITANCE Fig. 5-PEAK FORWARD SURGE CURRENT IFM, Apk VERAGE FORWARD CURRENT, AMP JUNCTION CAPACITANCE, pF FORWARD SURGE CURRENT, AMPERES UF100~UF1010 http://www.yeashin.com 2 REV.02 20110725