UE0201FCR-0715V YAGEO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

ULTRA LOW CAPACITANCE PROTECTION DEVICE UE0201 15V RoHS compliant & Ha logen free Product specification – November 28, 2014 V.0

Chip Resistor Surface Mount Product specification SERIES 0201 UE www.yageo. com Nov. 28, 2014 V.0 SCOPE This specification describes UE0201 has a typical capacitance of only 0.05pF (I/O to GND), and it can be used to meet the ESD immunity requirement of IEC61000-4-2 (15KV air, 8KV contact discharge).

APPLICATIONS

 All general purpose application s  High Definition Multi -Media Interface(H DMI)  Digital Visual Interface (DVI)  Display Port Interface (DP)  Unified Display Interface (UDI)  Mobile Display Digital Interface (MDDI)  Gigabit Ethernet  USB2.0 and USB3.0  IEEE1394 interface

FEATURES

 Halogen Free Epoxy  ESD protection for high speed data li nes to  IEC61000 -4-2  ESD contact discharge typical 8KV, max 15KV  ESD air discharge typical 15KV, max 25KV  Surface mount  Extremely low capacitance  Very low leakage current  Fast response time  Bi-directional ESD protection  Lead free solder termination  The best ESD protection for high frequency,  low voltage applications GLOBAL PART NUMBER (PREFERRED ) UE0201 X X X - XX XX X (1) CLAMPING VOLTAGE F = 40V (2) TRIGGER VOLTAGE C = 350V (3) PACKAGING TYPE R = Paper taping reel (4) CAPACITANCE – = Base on spec (5) TAPING REEL 07 = 7 inch dia Reel 7D = 7 inch reel with double quantity (6) WORKING VOLTAGE 15V = 15V (7) DEFAUL CODE Letter L is system default code for ordering only ORDERING EXAMPLE The ordering code for a UE0201 clamping voltage 40V, trigger voltage 350V ESD suppressor working voltage 15V, supplied in 7-inch tape reel with 10Kpcs quantify is: UE0201FCR -0715VL. ORDERING INFORMATION - GLOBAL PART NUMBER Part number is identified by the series name, size, clamping voltage, trigger voltage, packaging type, capacitance, taping reel, working voltage.

Chip Resistor Surface Mount Product specification SERIES 0201 UE www.yageo. com Nov. 28, 2014 V.0 MARKING UE0201 No Marking CONSTRUCTION The ESD suppressors are constructed out of a high - grade ceramic body. Internal metal electrode is cut a kerf into two parts which are connected by ESD absorbent paste. The ESD absorbent layer is covered with protective coat. Finally, the two external term inations (matte tin) are added. See Fig. 2. DIMENSIONS TYPE L (mm) W (mm) H (mm) I1 (mm) Table 1 Fig. 1 SIZE FOOTPRINT Dimensions code (unit: mm) UE0201 A B C 0.40 0.35 0.65 Table 2 RECOMMENDED FOOTPRINT DIMENSIONS Fig. 3 For Table 2 Fig. 2 ESD suppressor outlines OOUUTTLLIINNEESS For dimension, please refer to Table 1

Chip Resistor Surface Mount Product specification SERIES 0201 UE www.yageo. com Nov. 28, 2014 V.0 ABSOLUTE MAXIMUM RATINGS PARAMETER VALUE Maximum Contact discharge voltage Per IEC61000-4-2 15KV Maximum Air discharge voltage Per IEC61000-4-2 25KV Maximum Operating temperature(TOPER) -55℃ to +125℃ Maximum temperature for soldering during 10s (TL) 260℃ Table 3 PACKING STYLE REEL DIMENSION UE0201 Paper taping reel (R) 7" (178 mm) 10,000 PACKING STYLE AND PACKAGING QUANTITY Table 5 Packing style and packaging quantity ELECTRICAL CHARACTERISTICS (TA=25℃) CHARACTERISTICS UE0201 Rated Voltage (VR) 15V (Max) Trigger Voltage (VT) 350V (Typical) Clamping Voltage (VC) 40V (Typical) Leakage current (IL) 10nA (Typical) Capacitance (CP) 0.05pF(typical) NOTE: 1. Trigger and clamping voltage are measured per IEC 61000 -4-2, 8KV contact discharge method. 2. After reliability tests such as high temp storage, temp cycles, continuous ESD strike etc, the maximum leakage current is less than 10uA. 3. Capacitance is measured at VR=0V, f =1MHZ Table 4

Chip Resistor Surface Mount Product specification SERIES 0201 UE www.yageo. com Nov. 28, 2014 V.0 ESD CLAMPING TEST Fig. 4 Fig. 5 Fig. 6 SOLDER REFLOW RECOMMENDATIONS Fig. 7

Chip Resistor Surface Mount Product specification SERIES 0201 UE www.yageo. com Nov. 28, 2014 V.0 Dimension A0 B0 D P0 P1 P2 E F W

PACKAGE INFORMATION

Fig. 8

Chip Resistor Surface Mount Product specification SERIES 0201 UE www.yageo. com Nov. 28, 2014 V.0 TESTS AND REQUIREMENTS TEST REFERENCE STANDARD TEST CONDITION SPECIFICATION Operating temperature -55 °C to 125°C IL =10μ A Bending IEC 60068-2-21 3 mm deflection Resistance of solder heat IEC 60068-2-58 260 ± 5℃ for 10 ± 1 sec Thermal shock MIL-STD-202G Method-107G -55℃ to 125℃, 5 cycles Solderability IPC/JEDEC J-STD-002B test B 245 ± 5℃ solder, 2 ± 0.5 sec dwell. Solder: Sn96.5/Ag3.0/Cu0.5 95% coverage Capacitance VR=0V, f =1MHZ 0.05pF (typical) Table 6 Test condition, procedure and requirements

Chip Resistor Surface Mount Product specification SERIES 0201 UE www.yageo. com Nov. 28, 2014 V.0

REVISION HISTORY

“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 0 Nov. 28, 2014 - - First issue of this specification