U60D60C

U60D20C_V01 THINKISEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage V RRM V RWM V R 200 400 600 V Average Rectified Forward Current (Rated V R Per Leg Per Device I F(AV) 30 @ T C = 150°C 60 @ T C = 150°C A Peak Rectified Forward Current, Per Leg (Rated V R , Square Wave, 20 kHz, T C = 150°C) I FRM 60 @ T C = 150°C 60 @ T C =145°C A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Per Leg I FSM 600 A Operating Junction and Storage Temperature T J , T stg − 65 to +175 THERMAL CHARACTERISTICS (Per Diode Leg) Maximum Thermal Resistance, − Junction−to−Case − Junction−to−Ambient R /C0113JC R /C0113JA 1.5 °C/W

ELECTRICAL CHARACTERISTICS

(Per Diode Leg) Maximum Instantaneous Forward Voltage (Note 1) F = 30 Amp, T C = 150°C) F = 30 Amp, T C = 25°C) V F 0.95 1.05 1.20 1.30 1.5 1.7 V Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, T J = 150°C) (Rated DC Voltage, T J = 25°C) i R 5000 5000 /C0109A Maximum Reverse Recovery Time F = 1.0 A, di/dt = 50 A//C0109s) t rr ns Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Pulse Test: Pulse Width = 300 /C0109s, Duty Cycle ≤ 2.0%. F e a t u r e s /cuspopen Dual rectifier construction, positive center-tap /cuspopen Plastic package has Underwriters Laboratory Flammability Classification 94V0 /cuspopen Glass passivated chip junctions /cuspopen Superfast recovery time, high voltage /cuspopen Low forward voltage, high current capability /cuspopen Low thermal resistance /cuspopen Low power loss, high efficiency /cuspopen High temperature soldering guaranteed: 2 6 0 o C, 0.16”(4.06mm)from case for 10 seconds Mechanical Data /cuspopen Cases:Heatsink TO-3PN open metal package /cuspopen Terminals: Pure tin plated, lead free solderable per MIL-STD-750. Method 2026 /cuspopen Polarity: As marked /cuspopen Mounting position: Any /cuspopen Mounting torque: 10in-lbs. Max. /cuspopen Weight: 6.5 gram approximately Pb Free Plating Product U60D20C/U60D40C/U60D60C

60.0 Amperes Dual Common Cathode Ultra Fast Recovery Rectifiers

© 1995 Thinki Semiconductor Co., Ltd. http://www.thinkisemi.com.tw/ Page 1/3Rev.10T TO-3PN Bottom Side Metal Heat Sink Positive Negative Doubler Common Cathode Case Case Case Common Anode Suffix "C" Tandem Polarity Case Series Tandem Polarity Suffix "A" Suffix "D" Suffix "S"

0.001 0.01 0.1 1 10 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 40 80 120 160 0.4 0.6 0.8 1.0 1.2 1.4 1.6 K f T VJ -di F /dt t s K/W 0 200 400 600 800 0.0 0.3 0.6 0.9 1.2 1.5 1.8 V FR di F /dt V 200 600 10000 400 800 10 100 1000 0.0 0.2 0.4 0.6 0.8 0.0 0.4 0.8 1.2 100 120 I RM Q r I F A V F -di F /dt -di F /dt A/us A V uC t rr ns t fr Z thJC A/us us A/us A/us T VJ = 100°C V R = 100V T VJ = 100°C I F = 30A Fig. 3 Typ. peak reverse current I RM versus -di F /dt Fig. 2 Typ. reverse recovery charge Q r versus -di F /dt Fig. 1 Forward current I F versus V F T VJ =100°C T VJ = 25°C T VJ = 100°C V R = 100V T VJ = 100°C V R = 100V Q r I RM Fig. 4 Dynamic parameters Q r , I RM versus T VJ Fig. 5 Typ. recovery time t rr versus -di F /dt Fig. 6 Typ. peak forward voltage V FR and t fr versus di F /dt t fr V FR Fig. 7 Transient thermal impedance junction to case T VJ =150°C I F = 15A I F = 30A I F = 70A I F = 15A I F = 30A I F = 70A I F = 15A I F = 30A I F = 70A Ultra Fast Recovery Rectifier Diodes(U60D20C/U60D40C/U60D60C) U60D20C thru U60D60C © 1995 Thinki Semiconductor Co., Ltd. http://www.thinkisemi.com.tw/ Page 2/3Rev.10T

© 1995 Thinki Semiconductor Co., Ltd. http://www.thinkisemi.com.tw/ Page 3/3Rev.10T

Package Information

Symbol Dimensions(millimeters) Min. Max. A 4.60 5.00 A1 1.70 2.20 A2 2.20 2.60 b 0.80 1.20 b1 2.90 3.30 b2 1.90 2.30 c 0.40 0.80 e 5.25 5.65 E 15.3 15.7 E1 13.2 13.6 E2 13.1 13.5 E3 9.10 9.50 H 19.7 20.1 H1 19.1 20.1 H2 18.3 18.7 H3 2.80 3.20 G 4.80 5.20 ФP 3.00 3.40