U30D05PT CHENMKO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

FEATURES

  • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Dual rectifier construction, positive centertap * Glass passivated chip junctions * Low power loss * Low forward voltage, high current capability * High surge current capability * Ultra fast recovery times for high efficiency * High temperature soldering guaranteed : 260oC/10 seconds at terminals Case: JEDEC TO-247 molded plastic Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Weight: 5.6 grams ( Approximately ) MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. U30D05PT THRU U30D60PT TO-247(TO-3P) CHENMKO ENTERPRISE CO.,LTD ULTRA FSAT RECTIFIER VOLTAGE RANGE 50 - 600 Volts CURRENT 30 Amperes ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) NOTES : 2001-6 CHARACTERISTICS SYMBOL UNITS 1.501.300.975 10.0 uAmps 500 nS VoltsMaximum Instantaneous Forward Voltage at 15.0 A DC Maximum DC reverse current at rated DC blocking voltage per leg MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical thermal resistance ( NOTE 2 ) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO VF 35 50Maximum reverse recovery time ( NOTE 3 ) per leg trr IR TJ, TSTG IFSM UNITS Volts Volts Volts Amps U30D20PT 200 140 200 300 210 300 U30D60PTU30D50PTU30D05PT 420 600 600 U30D40PT 350 500 500 U30D30PT 280 400 400 30.0 300 1.0 -65 to +175 Amps oC / W oC U30D10PT 100 100 U30D15PT 150 105 150 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts 2. Thermal resistance from junction to case per leg mounted on heatsink 4. Suffix " C " = Common Cathod, Suffix " A " = Common Anode, Suffix " D " = Double. R JC Typical Junction capacitance per leg ( NOTE 1 ) 140200 pFCJ TC = 25oC TC = 100oC TO-247(TO-3P)Dimensions in inches and (millimeters) .245 (6.2) .645 (16.0) .625 (15.9) .093 (2.30) .076 (1.97) .086 (2.18) .076 (1.93) .095 (2.4) .085 (2.1) .127 (3.22) .117 (2.97) .225 (5.7) .795 (20.2) .160 (4.1) .140 (3.5) .775 (19.7) .205 (5.2) .048 (1.22) .044 (1.12) .030 (.76) .020 (.51) .203 (5.16) .193 (4.90) .840 (21.3) .820 (20.8) .225 (5.7) U30D20PT U30D60PTU30D50PTU30D05PT U30D40PTU30D30PTU30D10PT U30D15PT U30D20PT U30D60PTU30D50PTU30D40PTU30D30PTU30D15PT

RATING CHARACTERISTIC CURVES ( U30D05PT THRU U30D60PT ) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) CASE TEMPERATURE, ( oC ) NUMBER OF CYCLES AT 60HZ INSTANTANEOUS REVERSE CURRENT, (uA) PEAK FORWARD SURGE CURRENT, (A) 30.0 300 250 100 150 200 100 1.0 0.1 22.5 15.0 7.5 0.1 1.0 100 120 INSTANTANEOUS FORWARD VOLTAGE, (V) 0 25 50 75 100 125 150 0 2 4 6 8 10 20 40 60 100 TJ = 25oC U30D05PT~U30D20PT TJ = 25oC TJ = 100oC TJ = 75oC Single Half Wave 60HZ Resistive or Inductive Load 8.3 ms Single Half Sine-Wave (JEDEC Method) PULSE WIDTH=300uS 1% DUTY CYCLE FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, ( pF ) REVERSE VOLTAGE, ( V ) 100 1000 .1 .4 1.0 4 10 40 80 TJ =25oC U30D50PT&60PT U30D30PT~U30D40PT U30D05PT~U30D20PT U30D30PT~U30D60PT