U12JZ47

U12JZ47 UTC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

UNISONIC TECHNOLOGIES CO., U12JZ47/A TRIAC w w w . u n i s o n i c . c o m . t w 1 Copyright © 2005 Unisonic Technologies Co., QW-R401-025,A HIGH COMMUTATING TRIAC „ DESCRIPTION The U12JZ47/A is a bi-directional, silicon planar type triac in full plastic pack for AC power control applications. „ FEATURES * Repetitive Peak off-State Voltage: VDRM = 400, 600V * R.M.S On-State Current: IT (RMS) = 12A * High Commutating (dv / dt) * Isolation Voltage: V Isol = 1500V AC TO-220F *Pb-free plating product number: U12JZ47L/U12JZ47AL „ PIN CONFIGURATION PIN PIN NAME DESCRIPTION

1 MT1 Terminal 1

2 MT2 Terminal 2

3 Gate Gate Terminal

„ ORDERING INFORMATION Ordering Number Pn/Sn Lead free Package Packing U12JZ47-TF3-T U12JZ47L-TF3-T U12JZ47A-TF3-T U12JZ47AL-TF3-T TO-220F Tube

UNISONIC TECHNOLOGIES CO., LTD 2 www.unisonic.com.tw QW-R401-025,A „ ABSOLUATE MAXIUM RATINGS PARAMETER SYMBOL RATINGS UNIT U12JZ47-4 U12JZ47A-4 400 Repetitive Peak Off-State Voltage and Repetitive Peak Reverse Voltage U12JZ47-6 U12JZ47A-6 VDRM 600 V RMS On-State Current (Commercial Frequency, Full Sine Waveform TC = 72℃) IT (RMS) 12 A 50Hz 120 Peak One Cycle Surge On-State Current (Non-Repetitive) 60Hz ITSM 132 A I2t Limit Value I 2t 72 A 2s Critical Rate of Rise of On-State Current (Note *) di / dt 50 A/µs Peak Gate Power Dissipation P GM 5 W Average Gate Power Dissipation P G (AV) 0.5 V Peak Gate Voltage V GM 10 V Peak Gate Current I GM 2 A Junction Temperature T J 125 ℃ Storage Temperature Range T STG -40 ~ +150 ℃ Isolation Voltage (AC, t = 1min.) VIsol 1500 V Note: * di/dt test condition VDM=0.5×Rated, ITM≦17A, tgw≧10µs, tgr≦250ns, igp=IGT×2.0. „ ELECTRICAL CHARACTERISTICS (Ta= 25℃, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT I MT2 (+), Gate (+) 1.5 II MT2 (+), Gate (-) 1.5 III MT2 (-), Gate (-) 1.5 Gate Trigger Voltage IV VGT VD = 12V RL = 20Ω MT2 (-), Gate (+) V I MT2 (+), Gate (+) 30 II MT2 (+), Gate (-) 30 III MT2 (-), Gate (-) 30 U12JZ47 IV MT2 (-), Gate (+) I MT2 (+), Gate (+) 20 II MT2 (+), Gate (-) 20 III MT2 (-), Gate (-) 20 Gate Trigger Current U12JZ47A IV IGT VD = 12V RL = 20Ω MT2 (-), Gate (+) mA Peak On-State Voltage V TM I TM = 17A 1.5 V Gate Non-Trigger Voltage V GD VD = Rated, Tc = 125℃ 0.2 V Repetitive Peak Off−State Current I DRM V DRM = Rated 20 µA Holding Current I H V D = 12V, ITM = 1A 50 mA U12JZ47 300 Critical Rate of Rise of Off-State Voltage U12JZ47A dv / dt VDRM = Rated, Tj = 125℃ Exponential Rise 200 V/µs U12JZ47 10 Critical Rate of Rise of Off-State Voltage at Commutation U12JZ47A (dv / dt) c V DRM = 400V, Tj = 125℃ (di / dt) c = -6.5A / ms 4 V/µs „ THERMAL DATA PARAMETER SYMBOL RATINGS UNIT Thermal Resistance Junction to Case TO-220F θJc 3 ℃/W

UNISONIC TECHNOLOGIES CO., LTD 3 www.unisonic.com.tw QW-R401-025,A „ TYPICAL CHARACTERICS MAXIMUM ON-STATE CHARACTERISTICS GATE VOLTAGE , VT (V) ON-STATE CURRENT, IT (A) ON - STATE POWER DISSIPATION, PT (AV) (W) RMS ON - STATE CURRENT, IT (RMS) (A) MAXIMUM ON-STATE POWER DISSIPATION ALLOWABLE CASE TEMPERATURE VS. RMS ON-STATE CURRENT MAXIMUM ALLOWABLE CASE TEMPERATURE, Tc MAX. (℃) RMS ON - STATE CURRENT, IT (RMS) (A) MAXIMUM ALLOWABLE AMBIENT TEMPERATURE, Ta MAX. (℃) RMS ON - STATE CURRENT, IT (RMS) (A) ALLOWABLE AMBIENT TEMPERATURE VS. RMS ON-STATE CURRENT GATE CURRENT, IG (mA) 3 10 30 300 1000 GATE TRIGGER CHARACTERISTIC 0.5 GATE VOLTAGE, VG (V) 1001 3000 0.3 0.1 VGD= 0.2V IGM= 2A PG(AV) = 0.5W PGM= 5WVGM= 10V 25℃ VGT -40℃ VGT IGT(U12JZ47) IGT(U12JZ47) IGT(U12JZ47A) IGT(U12JZ47A) CONDUCTION TIME (CYCLES AT 50Hz AND 60Hz) RATED SURGE ON - STATE CURRENT 160SURGE ON-STATE CURRENT, ITSM (A) 140 11 0 3 0 100 120 3 100 60Hz 0.3 2.0 0.5 0.1 Tj = 125℃ 0.8 2.8 468 1 4 0 16102 360° CONDUCTION RESISTIVE, INDUCTIVE LOADS 468 1 4 100 120 0 16102 140 360° CONDUCTION RESISTIVE, INDUCTIVE LOADS 26 1 0 8 100 120 124 140 160 3 421 NO HEAT SINK 30×30×2mm A HEAT SINK 50×50×2mm A HEAT SINK 70×70×2mm A HEAT SINK 100×100×2mm A HEAT SINK SILICON GREASE COAT.

UNISONIC TECHNOLOGIES CO., LTD 4 www.unisonic.com.tw QW-R401-025,A ■ TYPICAL CHARACTERICS (Cont.) IGT (Tc) / IGT (Tc = 25℃) - Tc (TYPICAL) IGT (Tc) / IGT (Tc = 25℃) CASE TEMPERATURE, Tc (℃) IH (Tc) / IH (Tc = 25 ) - Tc (TYPICAL)℃ IH (Tc) / IH (Tc = 25℃) CASE TEMPERATURE, Tc (℃) PULSE TRIGGER CHARACTERISTIC (TYPICAL) IGT(tw)/IGT GATE TRIGGER PULSE WIDTH, t w (μs) TRANSIENT THERMAL IMPEDANCE (JUNCTION TO CASE) TRANSIENT THERMAL IMPEDANCE, θJC (℃/W) TIME, t (s) VGT (Tc) / VGT (Tc = 25℃) - Tc (TYPICAL) VGT (Tc) / VGT (Tc = 25℃) CASE TEMPERATURE, Tc (℃) 0 40 120 80-40 VD = 12V RL = 20Ω IGT (Ⅲ) IGT (Ⅰ, )Ⅱ 0 80 120 0.8 1.6 2.4 40-40 ITM = 1A VD = 12V 3003 10 100 0.5 100 13 0 IGT (Ⅰ) IGT (Ⅲ) IGT (Ⅱ) RESISTANCE LOAD VD = 12v RL= 20Ω Tc= 25℃ RECTANGULAR WAVEFORM IGT tw 0 40 120 0.2 0.6 1.0 1.4 -40 VD = 12V RL = 20Ω 0.1 1 100 0.1 0.3 0.001 100.01 0.5

UNISONIC TECHNOLOGIES CO., LTD 5 www.unisonic.com.tw QW-R401-025,A UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.