TZY2Z100A001R00

TZY2Z100A001R00 MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 44

Technical content

Cat.No.T13E-13 Ceramic Trimmer Capacitors

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

• All the products in this catalog comply with EU RoHS.
• EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment".
• For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

Selection Guide of Ceramic Trimmer Capacitor 3 TZR1 Series 4 TZS2 Series 8 TZY2 Series 12 TZV2 Series 16 TZC3 Series 20 TZW4 Series 24 TZB4 Series 27 TZ03 Series 32 Packaging 37 Recommended Adjustment Tools 39 Qualified Standards 41

CONTENTS

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o Part Numbering (Part Number) qProduct ID TZ Trimmer Capacitors Product ID rMaximum Capacitance Expressed by three-digit alphanumerics. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two numbers. If there is a decimal point, it is expressed by the capital letter "R ". In this case, all figures are significant digits. Ceramic Trimmer Capacitors tTerminal Shape Code Terminal Shape A B E F N Top Adjustment: Top Adjustment: Rear Adjustment: Top Adjustment: Rear Adjustment: TZR1 , TZS2 , TZY2 , TZV2 , TZC3 , TZW4 , TZB4 (SMD Type) TZB4 (SMD Type) TZB4 (SMD Type) TZ03 (Lead Type) TZ03 (Lead Type) uPackaging Code B00 R00 R01 * Bulk Reel (Taping ø180mm) Reel (Taping ø330mm) Packaging wSeries/Terminal Code 6mm Size Lead Type 4mm Size SMD Type 4mm Size SMD Type 3mm Size SMD Type 2mm Size SMD Type (Height 1.0mm) 2mm Size SMD Type (Height 1.25mm) 2mm Size SMD Type (Height 1.45mm) 1mm Size SMD Type (Height 0.90mm) Series/Terminal eTemperature Characteristics Code Z R K P NP0ppm/°C N750ppm/°C N1000ppm/°C N1200ppm/°C Temperature Characteristics Please refer to dimensions for terminals in detail. * Only TZB4. yIndividual Specifications Code 001 110 169 A10 B10 TZR1 , TZS2 , TZY2 , TZW4 Standard Type TZV2 , TZC3 Standard Type TZ03 Standard Type TZB4 No-cover Film Standard Type TZB4 with Cover Film Standard Type Individual Specifications Please refer to ratings for tolerance of temperature characteristics. t A y 001 q TZ u R00 r 200 e R w
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Selection G uide of C eram ic Trim m er C apacitor
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27 Start Mounting Method Soldering Method Surface Mount PCB Insertion Reflow Flow Manual Insertion High Frequency Power Height 2.6mm max. 4.2(W) x 5.2(L) TZW4 Height 1.45mm max. 2.3(W) x 3.2(L) TZV2 Height 1.25mm max. 2.5(W) x 3.2(L) TZY2 Height 1.00mm max. 2.2(W) x 2.7(L) TZS2 Height 0.90mm max. 1.5(W) x 1.7(L) TZR1 Height 1.7mm max. 3.2(W) x 4.5(L) TZC3 Height 3.2mm max. 4.0(W) x 4.5(L) TZB4_A TZB4_B TZB4_E Height 3.2mm max. 4.0(W) x 4.5(L) TZB4_A (with cover film) TZB4_B (with cover film) TZB4_E (with cover film) Height 5.3mm max. 6.0(W) x 6.0(L) TZ03_F TZ03_N All products of C eram ic Trim m er C apacitor com ply w ith R oH S and ELV

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Trimmer Capacitors TZR1 Series n Features 1. Ultra-small and thin with external dimensions of 1.5(W)x1.7(L)x0.85(H)mm (80% less in volume than the current product). 2. Unique construction with no plastic material provides superior soldering heat resistance to maintain excellent characteristic performance after reflow soldering. 3. Suitable for high frequency circuit due to high self resonant frequency (6.2GHz of TZR1Z010 at 1.0pF setting) n Applications 1. "Bluetooth" 2. Crystal oscillators 3. Crystal filters 4. Hand radios 5. Miniature tuner packs (FM Radio, TV) 6. Remote keyless entry systems 7. Pagers 0.35 0.9 max. 1.5 0.45 1.7 0.2 (Depth;0.15) (Tolerance: ±0.1)in mm Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZR1Z010A001 0.55 1.0 +100/-0% NP0–300ppm/°C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZR1Z1R5A001 0.7 1.5 +100/-0% NP0–300ppm/°C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZR1Z040A001 1.5 4.0 +100/-0% NP0–500ppm/°C 300min. at 1MHz, Cmax. 25Vdc 55Vdc TZR1R080A001 3.0 8.0 +100/-0% N750–500ppm/°C 300min. at 1MHz, Cmax. 25Vdc 55Vdc Insulation Resistance: 10000M ohm Torque: 0.1 to 1.0mNm Operating Temperature Range: -25 to +85°C n Construction Cover Metal Rotor Monolithic Stator
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Temperature Characteristics TZR1Z010 65 85 -10 -12 -25 -10 0 Z010 (N P0–300 ppm /°C ) Tem p. (°C ) C ap. C hange (% ) TZR1Z1R5 65 85 -10 -12 -25 -10 0 Z1R 5 (N P0–300 ppm /°C ) Tem p. (°C ) C ap. C hange (% ) TZR1Z040 200−10 −25 65 85 −10 −12 Z040 (N P0–500 ppm /°C ) C ap.C hange (% ) Tem p.(°C ) TZR1R080 0−10−25 45 65 85 −10 −12 R 080 (N 750±500 ppm /°C ) C ap.C hange (% ) Tem p.(°C ) n Frequency Characteristics TZR1Z010 10000 1000 100 0 2 4 6 Frequency (G H z) 0.55pF set 1.0pF set Z010 Q 8 10 TZR1Z1R5 10000 1000 100 0 2 4 6 Frequency (G H z) 0.7pF set 1.5pF set Z1R 5 Q 8 10 TZR1Z040 1000 1000 100 Q 100 500 1000 1500 2000 2500 Frequency (M H z) C apacitance(pF) Z040 TZR1R080 1000 1000 100 Q 100 500 1000 1500 2000 Frequency (M H z) C apacitance(pF) R 080 Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. n Land Pattern 2.2 1.2 0.5 Tolerance: ±0.1 in m m n Temperature Profile Tem perature (°C ) tim e (s)t1 Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5C u) Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 tim es245–3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Standard Profile Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 tim e230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 tim es260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Tem perature (°C ) tim e (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Lim it profile: refer to q) Solder Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350–10°C 3sec. m ax. 30W m ax. 1 tim e Cycle of solder iron Peak temperature (T5) Peak temperature (T3) n Notice (Storage and Operating Condition) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 degrees C and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of delivery. 5. D o not store under direct sunlight. 6. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxide gas, etc.) (2) In liquid (ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Notice (Soldering and Mounting) n Notice (Handling) n Notice (Other) Before using trim m er capacitor, please test after assem bly in your particular m ass production system . 1. Soldering (1) TZR 1 series can be soldered by reflow soldering m ethod and soldering iron. D o not use flow soldering m ethod (dipping). (2) Soldering condition R efer to the tem perature profile. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 100 m icro m to 150 m icro m and the dim ension of land pattern should be M urata's standard land pattern used at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause bridging betw een the term inals or contact failure due to flux w icking up. (5) W hen using soldering iron, the diam eter of the string solder should be less than 0.5m m . The string solder should be applied to the low er part of the term inal only. D o not apply flux except to the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed m etal rotor or contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the m onolithic stator of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m ended chlorine content of solder is as follow s. (a) Solder paste: 0.2w t% m ax. (b) String solder: 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferably 5.0 N [R ef: 500gf] m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breaking. (3) U se the suitable dim ension of the pick-up nozzle (1.1-1.2m m external diam eter and 0.8-0.9m m bore diam eter). 3. C leaning C annot be cleaned because of open construction. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.) 1. U se suitable screw drivers that fit com fortably in driver slot. *R ecom m ended screw driver for m anual adjustm ent M U R ATA: KM D R 160 2. W hen adjusting w ith a screw driver, do not apply excessive force (preferably 0.5 N [R ef: 50gf] m ax.) to m inim ize capacitance drift. If excessive force is applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Trimmer Capacitors TZS2 Series n Features 1. U ltra-sm all and thin type w ith external dim ensions of 2.2(W )x2.7(L)x0.95(H )m m (30% less in volum e from the current product). 2. U nique construction w ith no plastic m aterial provides superior soldering heat resistance to m aintain excellent characteristic perform ance after reflow soldering. 3. Pierced square hole allow s for high resistance to tuning force and in-process autom atic adjustm ent. n Applications 1. C rystal oscillators 2. C rystal filters 3. H and radios 4. C ordless telephones 5. C ellular telephones 6. Tuner packs 7. Pagers 8. R em ote keyless entry system s 9. PH S 10. R adar detectors 11. W -LAN 12. C om pact radios 13. H eadphone stereos in m m Tolerance: –0.1 2.7 1.0 1.0m ax. 2.2 0.6 0.4

0.20 D epth

Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZS2Z060A 001 3.0 6.0 +100/-0% NP0–300ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZS2Z100A 001 3.5 10.0 +100/-0% NP0–300ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZS2R 200A 001 7.0 20.0 +100/-0% N750–500ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc n Construction C over M etal R otor M onolithic Stator Insulation R esistance: 10000M ohm Torque: 0.5 to 5.0m N m O perating Tem perature R ange: -25 to +85°C

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Temperature Characteristics TZS2Z060 200−10 −25 65 85 −10 −12 Z060 (N P0–300 ppm /°C ) C ap.C hange (% ) Tem p.(°C ) TZS2Z100 200−10 −25 65 85−2 −10 −12 Z100 (N P0–300 ppm /°C ) C ap.C hange (% ) Tem p.(°C ) TZS2R200 0−10−25 45 65 85 −10 −12 R 200 (N 750±500 ppm /°C ) C ap.C hange (% ) Tem p.(°C ) n Frequency Characteristics TZS2Z060 Z060 Q 1000 100 500 1000 1500 2000 1000 100 Frequency (M H z) C apacitance (pF) TZS2Z100 Z100 Q 1000 100 200 600400 800 1000 1000 100 Frequency (M H z) C apacitance (pF) Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. n Frequency Characteristics TZS2R200 R 200 Q 1000 100 200 1000600 800400 1000 100 Frequency (M H z) C apacitance (pF) n Land Pattern 3.2 2.1 1.0 Tolerance: ±0.1 in m m n Temperature Profile Tem perature (°C ) tim e (s)t1 Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5C u) Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 tim es245–3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Standard Profile Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 tim e230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 tim es260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Tem perature (°C ) tim e (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Lim it profile: refer to q) Solder Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350–10°C 3sec. m ax. 30W m ax. 1 tim e Cycle of solder iron Peak temperature (T5) Peak temperature (T3)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Notice (Storage and Operating Condition) n Notice (Soldering and Mounting) 1. Soldering (1) TZS2 series can be soldered by reflow soldering m ethod and soldering iron. D o not use flow soldering m ethod (dipping). (2) Soldering condition R efer to the tem perature profile. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 100 m icro m to 150 m icro m and the dim ension of land pattern should be M urata's standard land pattern used at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause bridging betw een the term inals or contact failure due to flux w icking up. (5) W hen using soldering iron, the diam eter of the string solder should be less than 0.5m m . The string solder should be applied to the low er part of the term inal only. D o not apply flux except to the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed m etal rotor or contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the m onolithic stator of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m ended chlorine content of solder is as follow s. (a) Solder paste: 0.2w t% m ax. (b) String solder: 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferably 5.0 N [R ef: 500gf] m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breakage. (3) U se the suitable dim ension of the pick-up nozzle (1.8m m external diam eter and 1.3m m bore diam eter). 3. C leaning C annot be cleaned because of open construction. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.) n Notice (Handling) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 degrees C and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of delivery. 5. D o not store under direct sunlight. 6. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxide gas, etc.) (2) In liquid (ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above 1. U se suitable screw drivers that fit com fortably in driver slot. (1) R ecom m ended screw driver for m anual adjustm ent M U R ATA: KM D R 050 (2) R ecom m ended screw driver bit for autom atic adjustm ent M U R ATA: KM BT050 2. W hen adjusting w ith a screw driver, do not apply excessive force (preferably 1.0 N [R ef: 100gf] m ax.) to m inim ize capacitance drift. If excessive force is applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s. n Notice (Other) Before using trim m er capacitor, please test after assem bly in your particular m ass production system .
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Trimmer Capacitors TZY2 Series 3.2–0.2 2.5–0.2 1.25m ax. 0.95 1.0 0.45 0.5 1.4 (Tolerance: ±0.1)in m m Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZY2Z010A 001 0.5 1.0 +100/-0% NP0–300ppm/°C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZY2Z2R 5A 001 0.65 2.5 +100/-0% NP0–300ppm/°C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZY2Z030A 001 1.5 3.0 +100/-0% NP0–300ppm/°C 300min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2Z060A 001 2.5 6.0 +100/-0% NP0–300ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2Z100A 001 3.0 10.0 +100/-0% NP0–300ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2R 200A 001 4.5 20.0 +100/-0% N750–500ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2R 250A 001 5.5 25.0 +100/-0% N750–500ppm/°C 300min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2K 450A 001 8.0 45.0 +100/-0% N1000–500ppm/°C 300min. at 1MHz, Cmax. 25Vdc 55Vdc n Construction C over M etal R otor M onolithic Stator Insulation R esistance: 10000M ohm Torque: 0.5 to 5.0m N m O perating Tem perature R ange: -25 to +85°C n Features 1. Sm all and thin size w ith external dim ensions of 2.5(W )x3.2(L)x1.25m ax.(H )m m 2. N ew shape of cover can im prove the flux invasion com pared w ith current products. 3. Im provem ent of the adhesion betw een rotor and stator leads to superior stability. 4. U nique construction w ith no plastic m aterial provides superior soldering heat resistance to m aintain excellent characteristic perform ance after reflow soldering. 5. Suitable for high frequency circuit due to high self resonant frequency (4.8G H z of TZY2Z010 at 1.0pF setting) n Applications 1. C rystal oscillators 2. C rystal filters 3. Pagers 4. C ordless telephones 5. PH S 6. H and radios 7. C ellular telephones 8. W atches 9. R em ote keyless entry system s 10. W -LAN 11. R adar detectors 12. C om pact radios 13. D VD s 14. Burglarproof devices 15. H eadphone stereos
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Temperature Characteristics TZY2Z010 20 45 65 85 -10 -12 -25 -10 0 Z010 (N P0–300 ppm /°C ) Tem p. (°C ) C ap. C hange (% ) TZY2Z100 200−10 −25 65 85−2 −10 −12 Z100 (N P0–300 ppm /°C ) C ap.C hange (% ) Tem p.(°C ) TZY2R200 0−10−25 45 65 85 −10 −12 R 200 (N 750±500 ppm /°C ) C ap.C hange (% ) Tem p.(°C ) TZY2K450 K450 (N 1000–500ppm /°C ) Tem p. (°C ) C ap. C hange (% ) +12 +10 –10 –12 20 45 025 65 85 n Frequency Characteristics TZY2Z010 1000 100 0 2 4 6 Frequency (G H z) 0.5pF set 1.0pF set Z010 Q TZY2Z100 Z100 Q 1000 100 200 600400 800 1000 1000 100 Frequency (M H z) C apacitance (pF) Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. n Frequency Characteristics TZY2R200 R 200 Q 1000 100 200 1000600 800400 1000 100 Frequency (M H z) C apacitance (pF) TZY2K450 1000 100 1000 100 200 Q 400 600 800 C apacitance (pF) Frequency (M H z) K450 1000 100 1000 100 200 Q 400 600 800 C apacitance (pF) Frequency (M H z) K450 n Land Pattern Tolerance: ±0.1 in m m 4.0 2.4 1.2 n Temperature Profile Tem perature (°C ) tim e (s)t1 Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5C u) Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 tim es245–3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Standard Profile Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 tim e230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 tim es260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Tem perature (°C ) tim e (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Lim it profile: refer to q) Solder Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350–10°C 3sec. m ax. 30W m ax. 1 tim e Cycle of solder iron Peak temperature (T5) Peak temperature (T3)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Notice (Storage and Operating Condition) n Notice (Soldering and Mounting) 1. Soldering (1) TZY2 series can be soldered by reflow soldering m ethod and soldering iron. D o not use flow soldering m ethod (dipping). (2) Soldering condition R efer to the tem perature profile. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 120 m icro m to 170 m icro m and the dim ension of land pattern should be M urata's standard land pattern used at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause bridging betw een the term inals or contact failure due to flux w icking up. (5) W hen using soldering iron, the diam eter of the string solder should be less than 0.5m m . The string solder should be applied to the low er part of the term inal only. D o not apply flux except to the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed m etal rotor or contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the m onolithic stator of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m ended chlorine content of solder is as follow s. (a) Solder paste: 0.2w t% m ax. (b) String solder: 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferably 5.0 N [R ef: 500gf] m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breakage. (3) U se the suitable dim ension of the pick-up nozzle (1.8m m external diam eter and 1.3m m bore diam eter). 3. C leaning C annot be cleaned because of open construction. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.) n Notice (Handling) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 degrees C and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of delivery. 5. D o not store under direct sunlight. 6. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxide gas, etc.) (2) In liquid (ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above n Notice (Other) Before using trim m er capacitor, please test after assem bly in your particular m ass production system . 1. U se suitable screw drivers that fit com fortably in driver slot. (1) R ecom m ended screw driver for m anual adjustm ent EN G IN EER IN C .: D A-89 (M urata: KM D R 060) (2) R ecom m ended screw driver bit for autom atic adjustm ent M U R ATA: KM BT060 2. W hen adjusting w ith a screw driver, do not apply excessive force (preferably 1.0 N [R ef: 100gf] m ax.) to m inim ize capacitance drift. If excessive force is applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Trimmer Capacitors TZV2 Series 3.2–0.2 0.5 D epth 0.2 M arking(6pF) M arking(10pF) Tolerance: –0.1 in m m 1.0 Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZV2Z2R 5A 110 0.65 2.5 +100/-0% NP0–300ppm/°C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZV2Z030A 110 1.5 3.0 +100/-0% NP0–300ppm/°C 300min. at 1MHz, Cmax. 25Vdc 55Vdc TZV2Z060A 110 2.5 6.0 +100/-0% NP0–300ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZV2Z100A 110 3.0 10.0 +100/-0% NP0–300ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZV2R 200A 110 4.5 20.0 +100/-0% N750–500ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc Insulation R esistance: 10000M ohm Torque: 1.0 to 9.8m N m O perating Tem perature R ange: -25 to +85°C n Construction C over Spring W asher M etal R otor M onolithic Stator n Features 1. Sm all size w ith external dim ensions of 2.3(W )x3.2(L)x1.45m ax.(H )m m 2. U nique construction w ith no plastic m aterial provides superior soldering heat resistance to m aintain excellent characteristic perform ance after reflow soldering. 3. D esigned for autom atic placem ent in surface m ount applications. 4. Funnel shaped m etal case enables in-process autom atic adjustm ent. n Applications 1. C rystal oscillator 2. C rystal filters 3. H and radios 4. C ordless telephones 5. C ellular telephones 6. Tuner packs 7. Pagers 8. R em ote keyless entry system s 9. PH S 10. R adar detectors 11. W -LAN 12. C om pact radios 13. H eadphone stereos 14. D VD s 15. Burglarproof devices
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Temperature Characteristics TZV2Z2R5 200−10 −25 65 85−2 −10 −12 Z2R 5 (N P0–300 ppm /°C ) Tem p.(°C ) C ap.C hange (% ) TZV2Z060 200−10 −25 65 85 −10 −12 Z060 (N P0–300 ppm /°C ) C ap.C hange (% ) Tem p.(°C ) TZV2Z100 200−10 −25 65 85−2 −10 −12 Z100 (N P0–300 ppm /°C ) C ap.C hange (% ) Tem p.(°C ) TZV2R200 0−10−25 45 65 85 −10 −12 R 200 (N 750±500 ppm /°C ) C ap.C hange (% ) Tem p.(°C ) n Frequency Characteristics TZV2Z2R5 Z2R 5 1000 100 Q 500 1000 1500 2000 2500 3000 1000 100 Frequency (M H z) C apacitance (pF) TZV2Z060 Z060 Q 1000 100 500 1000 1500 2000 1000 100 Frequency (M H z) C apacitance (pF) Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. n Frequency Characteristics TZV2Z100 Z100 Q 1000 100 200 600400 800 1000 1000 100 Frequency (M H z) C apacitance (pF) TZV2R200 R 200 Q 1000 100 200 1000600 800400 1000 100 Frequency (M H z) C apacitance (pF) n Land Pattern Tolerance: ±0.1 in m m 4.0 2.4 1.2 n Temperature Profile Tem perature (°C ) tim e (s)t1 Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5C u) Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 tim es245–3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Standard Profile Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 tim e230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 tim es260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Tem perature (°C ) tim e (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Lim it profile: refer to q) Solder Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350–10°C 3sec. m ax. 30W m ax. 1 tim e Cycle of solder iron Peak temperature (T5) Peak temperature (T3)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Notice (Storage and Operating Condition) n Notice (Soldering and Mounting) 1. Soldering (1) TZV2 series can be soldered by reflow soldering m ethod and soldering iron. D o not use flow soldering m ethod (dipping). (2) Soldering condition R efer to the tem perature profile. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 120 m icro m to 170 m icro m and the dim ension of land pattern should be M urata's standard land pattern used at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause bridging betw een the term inals or contact failure due to flux w icking up. (5) W hen using soldering iron, the diam eter of the string solder should be less than 0.5m m . The string solder should be applied to the low er part of the term inal only. D o not apply flux except to the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed m etal rotor or contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the m onolithic stator of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m ended chlorine content of solder is as follow s. (a) Solder paste: 0.2w t% m ax. (b) String solder: 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferably 5.0 N [R ef: 500gf] m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breakage. (3) U se the suitable dim ension of the pick-up nozzle (1.8m m external diam eter and 1.3m m bore diam eter). 3. C leaning C annot be cleaned because of open construction. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.) n Notice (Handling) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 degrees C and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of delivery. 5. D o not store under direct sunlight. 6. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxide gas, etc.) (2) In liquid (ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above n Notice (Other) Before using trim m er capacitor, please test after assem bly in your particular m ass production system . 1. U se suitable screw drivers that fit com fortably in driver slot. (1) R ecom m ended screw driver for m anual adjustm ent VESSEL: N o.9000 -0.9x30 (M urata: KM D R 020) (2) R ecom m ended screw driver bit for autom atic adjustm ent M U R ATA: KM BT020 2. W hen adjusting w ith a screw driver, do not apply excessive force (preferably 1.0 N [R ef: 100gf] m ax.) to m inim ize capacitance drift. If excessive force is applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Trimmer Capacitors TZC 3 Series n Features 1. Sm all size w ith external dim ension of 3.2(W )x4.5(L)x1.6(H )m m 2. C olor coded stator perm its easy identification of capacitance and reduces m ounting errors. 3. C an be adjusted w ith conventional adjustm ent tools having a thickness of 0.5m m . 4. D esigned for autom atic placem ent in surface m ount applications. 5. H eat resistant resin w ithstands reflow soldering tem peratures. n Applications 1. C om pact radios 2. H eadphone stereos 3. Pagers 4. Portable radio equipm ents 5. H ybrid IC s 6. C ellular telephones 7. C ordless telephones 8. R em ote keyless entry system s 0.5 2.5 dia. 4.5 0.75 3.2 0.8 0.35 1.6 4.5 0.6 0.6 0.8 Tolerance: –0.1 in m m Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage Stator/Case Color TZC 3Z030A 110 1.4 3.0 +50/-0% NP0–300ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Brown TZC 3Z060A 110 2.0 6.0 +50/-0% NP0–300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZC 3R 100A 110 3.0 10.0 +50/-0% N750–300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc White TZC 3P200A 110 5.0 20.0 +50/-0% N1200–500ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Red TZC 3P300A 110 6.5 30.0 +50/-0% N1200–500ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Green Insulation R esistance: 10000M ohm Torque: 1.5 to 9.8m N m O perating Tem perature R ange: -25 to +85°C n Construction C enter axis R otor spring term inal C eram ic plate Stator (O ne m olded injection w ith stator term inal) Stator term inal
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Temperature Characteristics TZC3Z030 200−10−25 45 65 −10 −12 Tem p.(°C ) Z030 (N P0±300 ppm /°C ) C ap.C hange (% ) TZC3Z060 200−10−25 45 65 85−2 −10 −12 Tem p.(°C ) Z060 (N P0±300 ppm /°C ) C ap.C hange (% ) TZC3R100 0−10−25 45 65 85 −10 −12 Tem p.(°C ) R 100 (N 750±300 ppm /°C ) C ap.C hange (% ) TZC3P200 0–10–25 45 65 85 –10 –12 Tem p.(°C )20 P200 (N 1200–500ppm /°C ) C ap.C hange (% ) n Frequency Characteristics TZC3Z030 Z030 1000 100Q 100 500 1000 1500 Frequency (M H z) 2000 1000 100 C apacitance (pF) TZC3Z060 Z060 Q 1000 100 100 500 200015001000 Frequency (M H z) 1000 100 C apacitance (pF) Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. n Frequency Characteristics TZC3R100 R 100 Q 1000 100 200 600400 800 1000 Frequency (M H z) 1000 100 C apacitance (pF) TZC3P200 P200 Q 1000 100 200 1000600 800400 Frequency (M H z) 1000 100 C apacitance (pF) n Land Pattern 5.0 −0.5 3.3±0.1 1.0±0.1 Tolerance: –0.1 in m m n Temperature Profile Tem perature (°C ) tim e (s)t1 Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5C u) Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 tim es245–3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Standard Profile Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 tim e230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 tim es260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Tem perature (°C ) tim e (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Lim it profile: refer to q) Solder Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350–10°C 3sec. m ax. 30W m ax. 1 tim e Cycle of solder iron Peak temperature (T5) Peak temperature (T3)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Notice (Storage and Operating Condition) n Notice (Soldering and Mounting) n Notice (Handling) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 degrees C and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of delivery. 5. D o not store under direct sunlight. 6. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxide gas, etc.) (2) In liquid (ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above 1. Soldering (1) TZC 3 series can be soldered by reflow soldering m ethod and soldering iron. D o not use flow soldering m ethod (dipping). (2) Soldering condition R efer to the tem perature profile. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 150 m icro m to 200 m icro m and the dim ension of land pattern should be M urata's standard land pattern used at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause bridging betw een the term inals or contact failure due to flux w icking up. (5) W hen using soldering iron, the diam eter of the string solder should be less than 0.5m m . The string solder should be applied to the low er part of the term inal only. D o not apply flux except to the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed m etal rotor or contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the stator of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m ended chlorine content of solder is as follow s. (a) Solder paste: 0.2w t% m ax. (b) String solder: 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. (8) W hen soldering the TZC 3 series, the solder should not flow into the staking part of the substrate. If such flow does occur, driver slot rotation w ill be dam aged. 2. M ounting (1) D o not apply excessive force (preferably 5.0 N [R ef: 500gf] m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breakage. (3) U se the suitable dim ension of the pick-up nozzle (2.5m m external diam eter and 1.5m m bore diam eter). 3. C leaning C annot be cleaned because of open construction. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.) 1. U se suitable screw drivers that fit com fortably in driver slot. (1) R ecom m ended screw driver for m anual adjustm ent Standard type --> M U R ATA: KM D R 010 (2) R ecom m ended screw driver bit for autom atic adjustm ent Standard type --> M U R ATA: KM BT010 2. W hen adjusting w ith a screw driver, do not apply excessive force (preferably 1.0 N [R ef: 100gf] m ax.) to m inim ize capacitance drift. If excessive force is applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s. n Notice (Other) Before using trim m er capacitor, please test after assem bly in your particular m ass production system .
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Trimmer Capacitors TZW 4 Series 5.2–0.2 4.2–0.2 2.8–0.2 2.6 m ax. ( Tolerance: –0.1 )in m m 0.6 +0.1 -0.20.3 1.6

0.4 D epth

3.0 2.2 Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZW 4Z010A 001 0.4 1.0 +50/-0% NP0–150ppm/°C 200min. at 500MHz, Cmax. 250Vdc 550Vdc TZW 4Z1R 5A 001 0.4 1.5 +100/-0% NP0–150ppm/°C 200min. at 500MHz, Cmax. 250Vdc 550Vdc Insulation R esistance: 10000M ohm Torque: 1.5 to 10.0m N m O perating Tem perature R ange: -55 to +125°C n Construction C over M etal R otor M onolithic Stator n Features 1. To m eet high pow er application due to w ithstanding voltage 550Vdc 2. Extrem ely high self resonant frequency (M ore than 3G H z at rated C m ax.) 3. Typical application: Im pedance m atching for C ellular Base Station 4. H igh Q value in m ore than VH F, U H F and M icrow ave bands (M ore than 200 in 500M H z, C m ax.) 5. Available for pick and place m achine. Possible thinner design due to 2.6m m low profile. 6. N on electrical contact construction (rotor as m iddle electrode) provides high reliability. n Applications 1. Transm itting pow er am plifier for C ellular Base Station 2. Transm itting am plifier for PH S Base Station 3. H igh frequency electric circuit 4. H igh pow er radio transm ission 5. Transponder am plifier for cable TV

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Temperature Characteristics TZW4Z1R5 0−10−25−55 45 65 85 105 125 −10 −12 Z1R 5 (N P0–150 ppm /˚C ) Tem p. (˚C ) C ap.C hange (% ) n Frequency Characteristics TZW4Z1R5 Z1R 5 1000 100 Q 500 1000 1500 2000 2500 3000 Frequency (M H z) 1.5pF set n Land Pattern Tolerance: ±0.1 in m m 4.4 7.0 2.5 n Temperature Profile Tem perature (°C ) tim e (s)t1 Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5C u) Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 tim es245–3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Standard Profile Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 tim e230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 tim es260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Tem perature (°C ) tim e (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Lim it profile: refer to q) Solder Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350–10°C 3sec. m ax. 30W m ax. 1 tim e Cycle of solder iron Peak temperature (T5) Peak temperature (T3)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Notice (Storage and Operating Condition) n Notice (Soldering and Mounting) 1. Soldering (1) TZW 4 series can be soldered by reflow soldering m ethod and soldering iron. D o not use flow soldering m ethod (dipping). (2) Soldering condition R efer to the tem perature profile. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 150 m icro m to 200 m icro m and the dim ension of land pattern should be M urata's standard land pattern used at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause bridging betw een the term inals or contact failure due to flux w icking up. (5) W hen using soldering iron, the diam eter of the string solder should be less than 0.5m m . The string solder should be applied to the low er part of the term inal only. D o not apply flux except to the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed m etal rotor or the contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the m onolithic stator of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m ended chlorine content of solder is as follow s. (a) Solder paste: 0.2w t% m ax. (b) String solder: 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferably 5.0 N [R ef: 500gf] m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breaking. (3) U se the suitable dim ension of the pick-up nozzle (1.8m m external diam eter and 1.1m m bore diam eter). 3. C leaning C annot be cleaned because of open construction. n Notice (Handling) n Notice (Other) Before using trim m er capacitor, please test after assem bly in your particular m ass production system . 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 degrees C and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of delivery. 5. D o not store under direct sunlight. 6. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (Ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxie gas, etc.) (2) In liquid (Ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty/dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above 1. U se suitable screw drivers that fit com fortably in driver slot. -R ecom m ended screw driver for m anual adjustm ent VESSEL: N o.9000 -1.3x30 (M urata: KM D R 130) 2. W hen adjusting w ith a screw driver, do not apply excessive force (preferably 1.0 N [R ef: 100gf] m ax.) to m inim ize capacitance drift. If excessive force applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Trimmer Capacitors TZB 4 Series 2.7–0.3 2.4–0.1 4.0–0.2 4.5–0.2 5.0 1.2–0.1 3.0–0.2 Tolerance: –0.5 in m m A Type 2.4–0.1 4.0–0.2 4.5–0.2 7.0 1.2–0.1 3.0–0.2 Tolerance: –0.5 in m m B Type 0.6–0.1 D epth 0.5 4.8 2.4–0.1 4.0–0.2 4.5–0.2 4.5 4.0–0.2 3.0–0.2 Tolerance: –0.5 in m m 7.0 0.8–0.1 E Type Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage Stator/Case Color TZB 4Z030pp10 1.4 3.0 +50/-0% NP0–200ppm/°C 300min. at 1MHz, Cmax 100Vdc 220Vdc Brown TZB 4Z060pp10 2.0 6.0 +50/-0% NP0–200ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZB 4Z100pp10 3.0 10.0 +50/-0% NP0–300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc White TZB 4R 200pp10 4.5 20.0 +50/-0% N750–400ppm/°C 500min. at 1MHz, Cmax 100Vdc 220Vdc Red TZB 4P300pp10 6.5 30.0 +50/-0% N1200–500ppm/°C 300min. at 1MHz, Cmax 100Vdc 220Vdc Green TZB 4P400pp10 8.5 40.0 +50/-0% N1200–500ppm/°C 300min. at 1MHz, Cmax 100Vdc 220Vdc Yellow TZB 4Z250pp10 4.0 25.0 +100/-0% NP0–300ppm/°C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black+Marking TZB 4R 500pp10 7.0 50.0 +100/-0% N750–300ppm/°C 300min. at 1MHz, Cmax 50Vdc 110Vdc Black+Marking Insulation R esistance: 10000M ohm Torque: 1.5 to 9.8m N m O perating Tem perature R ange: -25 to +85°C First blank: Term inal Type Second blank: C over film codes (A: not provided, B: provided) ex. TZB4Z100AB10: Term inal Type is A, and C over film is provided. n Features 1. M iniature rectangular shape: 4.0(W )x4.5(L)x3.0(H )m m 2. C olor coded case facilitates identification of capacitance range. 3. D esigned for autom atic placem ent in surface m ount applications. 4. D esigned to w ithstand flux baths and solder baths (w ith cover film type) 5. C an be tem porarily attached to PC B w ith adhesives (Term inal style A and B) 6. C an be reflow and flow (w ith cover film type) soldering m ethod 7. Stable characteristics over a w ide frequency range (R esonant frequency: 1000M H z m in. / 6pF) n Applications 1. C ar audio system s 2. C ordless telephones 3. H ybrid IC s 4. Pagers 5. R em ote keyless entry system s 6. Tuner packs 7. Surveillance cam eras 8. D VD s 9. Burglarproof devices
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Construction Plastic C ase R otor Spring M etal R otor C eram ic Plate Stator Term inal C over Film (C over film type) R otor Term inal n Land Pattern/Mounting Holes A Type 1.6±0.1 7.0 +0- 0.5 2.4±0.2 (in m m ) B Type (in m m ) 4.0±0.2 1.6±0.1 8.0 +0 - 0.5 E Type 8.0 +0 - 0.5 4.2±0.2 1.2±0.1 3.2±0.2 dia. (in m m ) n Temperature Characteristics TZB4Z060 +10 +20 0–25 +55 +85 –10 Z060 (N P0–200ppm /°C ) Tem p. (°C ) C ap.C hange (% ) TZB4Z100 +10 +20 0–25 +55 +85 –10 Z100 (N P0–300ppm /°C ) C ap.C hange (% ) Tem p. (°C ) Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. n Temperature Characteristics TZB4R200 +10 +20 0–25 +55 +85 –10 R 200 (N 750–400ppm /°C ) C ap.C hange (% ) Tem p. (°C ) TZB4R500 +10 +20 0–25 +55 +85 –10 R 500 (N 750–300ppm /°C ) C ap.C hange (% ) Tem p.(°C ) n Frequency Characteristics TZB4Z060 Z060 1000 100 Q 1000 100 800700600500400300200100 900 1000 Frequency (M H z) C apacitance (pF) TZB4Z100 Z100 Q 1000 100 800700600500400300200100 900 1000 Frequency (M H z) 1000 100 C apacitance (pF) TZB4R200 R 200 Q 1000 100 200100 400300 500 600 Frequency (M H z) 1000 100 C apacitance (pF) TZB4R500 R 500 Q 1000 100 100 500300 400200 Frequency (M H z) 1000 100 C apacitance (pF) Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. n Temperature Profile Tem perature (°C ) tim e (s)t1 Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5C u), Eutectic solder (63Sn/37Pb) Tem perature (°C ) T3T2 tim e (s) Limit Profile Standard Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5C u) Limit Profile Standard Profile
• Available for terminal shape A, B, and E..
• Immerse the body in solder bath, available for cover film type. Standard Profile Pre-heating Heating Temp. (T1) Time (t1) Temp. (T2) Time (t2) 1 tim e150°C 60 to 120sec. 250°C 5sec. m ax. Tem perature (°C ) tim e (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Lim it profile: refer to q) Flow Soldering Profile Reflow Soldering Profile Cycle of reflow Limit Profile Pre-heating Heating Temp. (T1) Time (t1) Temp. (T3) Time (t2) 2 tim es150°C 60 to 120sec. 265–3°C 5sec. m ax. Cycle of reflow Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 tim es245–3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 tim es260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Peak temperature (T5) Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 tim e230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Peak temperature (T3) Solder Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350–10°C 3sec. m ax. 30W m ax. 1 tim e Cycle of solder iron n Notice (Storage and Operating Condition) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 degrees C and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of delivery. 5. D o not store under direct sunlight. 6. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxide gas, etc.) (2) In liquid (ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Notice (Soldering and Mounting) n Notice (Handling) 1. U se suitable screw drivers that fit com fortably in driver slot. (1) R ecom m ended screw driver for m anual adjustm ent M U R ATA: KM D R 010 (2) R ecom m ended screw driver bit for autom atic adjustm ent M U R ATA: KM BT010 2. W hen adjusting w ith a screw driver, do not apply excessive force (preferably 1.0 N [R ef: 100gf] m ax.) to m inim ize capacitance drift. If excessive force is applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s. 4. D o not break the cover film before the com pletion of PC B m ounting, soldering, and cleaning. 5. D o not clean the trim m er capacitor after the cover film has been broken. 6. To break the cover film , first turn the screw driver m ore than 360 deg., and set the capacitance value. (O nly inserting the screw driver cannot break the cover film .) n Notice (Other) Before using trim m er capacitor, please test after assem bly in your particular m ass production system . 1. Soldering (1) C an be soldered by reflow soldering m ethod, flow soldering m ethod, and soldering iron. (2) Soldering condition R efer to the tem perature profile. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The am ount of solder is critical. (4) The thickness of solder paste should be printed from 150 m icro m to 200 m icro m and the dim ension of land pattern should be M urata's standard land pattern used at reflow soldering. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause bridging betw een the term inals or contact failure due to flux w icking up. (5) W hen using soldering iron, the string solder should be applied to the low er part of the term inal only. D o not apply flux except to the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed rotor or contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the plastic case of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (6) O ur recom m ended chlorine content of solder is as follow s. (a) Solder paste: 0.2w t% m ax. (b) String solder: 0.5w t% m ax. (7) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferably 5.0N [R ef: 500gf] m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) D o not w arp and/or bend PC B to prevent trim m er capacitor from breakage. (3) In case of bending the term inals, do not apply excessive force to the body of the product and prevent the term inal fixing part from dam aging. (4) U se the suitable dim ension of the pick-up nozzle. > W ithout cover film type - External dim ensions of 4.5x4.0m m and 2.5m m bore diam eter. > W ith cover film type - 4.0m m external diam eter and 2.0m m bore diam eter. 3. C leaning [w ith cover film type] Isopropyl alcohol and Ethyl alcohol are available m aterial for cleaning. If you use any other types of solvents, please evaluate perform ance by your set. M oreover, please confirm no dam age for trim m er capacitor after cleaning by your conditions. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Trimmer Capacitors TZ03 Series n Features 1. C olor coded case facilitates identification of capacitance range. 2. Sealed construction prevents the penetration of flux and dust. 3. Available in tw o adjustm ent styles: Top/R ear. 4. + (C ross-shaped) slot enables autom atic adjustm ent. n Applications 1. C ar audio system s 2. C ar clocks 3. Stereos 4. R adio cassette tape recorders 5. C ordless telephones 6. Video gam es 7. C om pact radio equipm ent 8. R em ote keyless entry system s 9. Burglarproof devices 2.5–0.2 dia. 0.5–0.2 D epth 0.5 m in. 6 dia. Tolerance: –0.5 in m m 1.0–0.1 1.0–0.1 6.6 0.2–0.05 0.25–0.05 4.83.3 F Type 2.5–0.2 dia. 0.5–0.2 D epth 0.5 m in. 6.0 dia. 6.0 1.2–0.1 7.8 6.4 3.0 3.4 1.0–0.1 Tolerance: –0.5 in m m 0.25– 0.05 0.2–0.05 4.8 3.0 4.0 N Type Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage Stator/Case Color TZ03Z2R 3p169 1.25 2.3 +50/-0% NP0–200ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Black TZ03Z050p169 1.5 5.0 +50/-0% NP0–200ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZ03Z070p169 2.0 7.0 +50/-0% NP0–200ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZ03Z100p169 2.7 10.0 +50/-0% NP0–200ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZ03R 200p169 4.2 20.0 +50/-0% N750–300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Red TZ03R 300p169 5.2 30.0 +50/-0% N750–300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Green TZ03P450p169 6.8 45.0 +50/-0% N1200–500ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Yellow TZ03P600p169 9.8 60.0 +50/-0% N1200–500ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Brown TZ03Z500p169 6.0 50.0 +100/-0% NP0–300ppm/°C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Orange TZ03R 900p169 9.0 90.0 +100/-0% N750–300ppm/°C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black+Dot TZ03R 121p169 10.0 120.0 +100/-0% N750–300ppm/°C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black Insulation R esistance: 10000M ohm Torque: 2.0 to 14.7m N m O perating Tem perature R ange: -25 to +85°C A blank colum n is filled w ith term inal type codes.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Construction n Mounting Holes F Type 1.3±0.1 dia. 1.3±0.1 dia. Tolerance: –0.5 in m m N Type (Tolerance: –0.5 in m m ) 1.3–0.1 1.1–0.1 3 3.3 3 dia. n Temperature Characteristics TZ03Z070 –25 Tem p. (°C ) C ap.C hange (% ) Z070 (N P0–200ppm /°C ) TZ03R200 –25 8555 Tem p. (°C )00 C ap.C hange (% ) R 200 (N 750–300ppm /°C ) TZ03P600 –25 8555 Tem p. (°C )00 –10 C ap.C hange (% ) P600 (N 1200–500ppm /°C ) TZ03Z500 –25 Tem p. (°C )00 –10 C ap.C hange (% ) Z500 (N P0–300ppm /°C ) Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. n Temperature Characteristics TZ03R121 –25 8555 Tem p. (°C )00 –10 C ap.C hange (% ) R 121 (N 750–300ppm /°C ) n Frequency Characteristics TZ03Z070 1000 100 1001 200 300 400 500 600 700 800 900 1000 1000 100 Q Frequency (M H z) C apacitance (pF) Z070 TZ03R200 1000 100 1001 200 300 400 500 1000 100 Q Frequency (M H z) C apacitance (pF) R 200 TZ03P450 1000 100 1001 200 300 400 500 1000 100 Q Frequency (M H z) C apacitance (pF) P450 TZ03P600 1000 100 1001 200 300 400 500 1000 100 Q Frequency (M H z) C apacitance (pF) P600 Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. n Frequency Characteristics TZ03R900 1000 100 1001 200 300 400 500 1000 100 Q Frequency (M H z) C apacitance (pF) R 900 n Temperature Profile Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5C u), Eutectic solder (63Sn/37Pb) Tem perature (°C ) Pre-heating H eating T3T2 tim e (s) Limit Profile Standard Profile Standard Profile Pre-heating Heating Temp. (T1) Time (t1) Temp. (T2) Time (t2) 1 tim e150°C 60 to 120sec. 250°C 5sec. m ax. Flow Soldering Profile Cycle of reflow Limit Profile Pre-heating Heating Temp. (T1) Time (t1) Temp. (T3) Time (t2) 2 tim es150°C 60 to 120sec. 265–3°C 5sec. m ax. Cycle of reflow Solder Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350–10°C 3sec. m ax. 30W m ax. 1 tim e Cycle of solder iron n Notice (Storage and Operating Condition) 1. D o not use the trim m er capacitor under atm osphere of R TV silicone rubber (R oom Tem perature Vulcanizing Silicone R ubber) except Acetone liberating silicone sealant. 2. Before using trim m er capacitor, please store under the condition of -10 to +40 degrees C and 30 to 85% R H . 3. D o not store in or near corrosive gasses. 4. U se w ithin 6 m onths of delivery. 5. O pen the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackaging. 7. D o not store under direct sunlight. 8. D o not use the trim m er capacitor under the conditions listed below . (1) C orrosive gasses atm osphere (ex. C hlorine gas, H ydrogen sulfide gas, Am m onia gas, Sulfuric acid gas, N itric oxide gas, etc.) (2) In liquid (ex. w ater, oil, m edical liquid, organic solvent, etc.) (3) D usty / dirty atm osphere (4) D irect sunlight (5) Static voltage nor electric/m agnetic fields (6) D irect sea breeze (7) O ther variations of the above
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Notice (Soldering and Mounting) n Notice (Handling) n Notice (Other) Before using trim m er capacitor, please test after assem bly in your particular m ass production system . 1. U se suitable screw drivers that fit com fortably in driver slot. (1) R ecom m ended screw driver for m anual adjustm ent M U R ATA: KM D R 010 (2) R ecom m ended screw driver bit for autom atic adjustm ent M U R ATA: KM BT010 2. W hen adjusting w ith a screw driver, do not apply excessive force (preferably 1.0 N [R ef: 100gf] m ax.) to m inim ize capacitance drift. If excessive force is applied to the screw driver slot, it m ay cause deform ation of the products. 3. D o not apply adhesive, lock paints, or any other substances to the trim m er capacitor to secure the rotor position. They m ay cause corrosion or electrical contact problem s. 1. Soldering (1) TZ03 series can be soldered by flow soldering m ethod and soldering iron. D o not use reflow soldering m ethod. (2) Soldering condition R efer to the tem perature profile. If the soldering conditions are not suitable, e.g., excessive tim e and/or excessive tem perature, the trim m er capacitor m ay deviate from the specified characteristics. (3) The dim ension of m ounting hole should be M urata's standard m ounting hole used at flow soldering. The am ount of solder is critical. Insufficient am ounts of solder can lead to insufficient soldering strength on PC B. Excessive am ounts of solder m ay cause bridging betw een the term inals or contact failure due to flux w icking up. (4) W hen using soldering iron, the string solder should be applied to the low er part of the term inal only. D o not apply flux except to the term inals. Excessive am ounts of solder and/or applying solder to the upper part of the term inal m ay cause fixed rotor or the contact failure due to flux invasion into the m ovable part and/or the contact point. The soldering iron should not com e in contact w ith the plastic case of the trim m er capacitor. If such contact does occur, the trim m er capacitor m ay be dam aged. (5) O ur recom m ended chlorine content of string solder is 0.5w t% m ax. (6) D o not use w ater-soluble flux (for w ater cleaning). To prevent the deterioration of trim m er capacitor characteristics, apply flux only to term inals. 2. M ounting (1) D o not apply excessive force (preferably 5.0 N [R ef: 500gf] m ax.), w hen the trim m er capacitor is m ounted on the PC B. (2) U se the suitable PC B holes w hich are the sam e pitch as the term inal of the trim m er capacitor. If it w ould not fit w ith the term inal, the excessive stress w ould be applied to the term inal and the trim m er capacitor m ay deviate from the specified characteristics. (3) D o not apply bending stress m ore than 10.0N (R ef: 1kgf) after the trim m er capacitor has been m ounted on the PC B. (4) M ount trim m er capacitor in contact w ith PC B. (5) In case of bending the term inals, do not apply excessive force to the body of the product and prevent the term inal fixing part from dam aging. 3. C leaning Isopropyl alcohol and Ethyl alcohol are available m aterial for cleaning. If you use any other types of solvents, please evaluate perform ance by your set. M oreover, please confirm no dam age for trim m er capacitor after cleaning by your conditions. 4. O ther N ote the polarity of the trim m er capacitor to m inim ize influence by stray capacitance. (R efer to the dim ensions concerning the polarity.)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Minimum Quantity Part Number TZR 1 TZS2 TZY2 TZV2 TZC 3 TZW 4 TZB 4 TZ03 3000 3000 2000 2000 1000 500 500 φ180mm Reel 2500 φ330mm Reel 500 500 500 500 500 100 500 1000 Bulk Minimum Quantity (pcs.) n Dimension of Tape TZR1 Series 4.0–0.1 8.0–0.3 2.0–0.1 4.0–0.1 1.5 D ia.+0.1 2.0–0.2 1.75–0.1 3.5–0.1 1.8–0.2 1.05–0.2 0.25–0.1 (in m m ) TZS2 Series 4.0–0.1 8.0–0.3 2.0–0.1 4.0–0.1 1.5 -0 dia. +0.1 3.0–0.2 1.75–0.1 3.5–0.1 2.5–0.2 1.25–0.2 0.25–0.1 (in m m ) TZY2/TZV2 Series 1.5 +0.1 − 0 dia. 2.0 4.0 A A 2.7±0.2 4.0 3.5 0.25 t 8.0±0.2 1.75 A-Across section t=TZY2 (TZVY2) : 1.6±0.2 TZV2 (TZV02) : 1.9±0.2 3.6±0.2 Tolerance: –0.1 in m m TZC3 Series 1.5 +0.1 − 0 dia. 4.9±0.2 A 5.5 1.75 12±0.3 0.3 2.0±0.2 A A-Across section Tolerance : –0.1 in m m 3.6±0.2 TZW4 Series 12±0.2 1.5 +0.1 − 0 dia. 5.6 A 5.5 1.75 0.3 2.6 A A-Across section Tolerance: –0.1 in m m 4.6 TZB4 Series 1.5 +0.1 − 0 dia. 8.0 2.0 4 .0 A A 1.8 4.3 3.55±0.2 4.8 7.5 5.5 12.0±0.3 0.3±0.1 A-Across section D irection of feed Tolerance: –0.1 in m m 1.75
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. n Dimension of dia. 178mm Reel TZR1/TZS2/TZY2/TZV2 Series (in m m ) 13.0–0.5 D ia. 21.0–0.8 D ia. 2.0–0.5 178–2 D ia. 9.0–1.0 50 m in. 13.0–1.0 TZC3/TZW4/TZB4 Series (in m m ) 13.0–0.5 D ia. 21.0–0.8 D ia. 2.0–0.5 178–2 D ia. 13.0–1.0 50 m in. 17.0–1.0 n Dimension of dia. 330mm Reel TZB4 Series (in m m ) 13.0–0.5 dia. 21.0–0.8 dia. 2.0–0.5 328–2 dia. 13.5–1.0 50 m in. 17.5–1.0
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

MURATA MFG. K M D R 160 MURATA MFG. K M D R 050 ENGINEER INC. D A -89 VESSEL MFG. N O .9000 -0.9g30 MURATA MFG. K M D R 010 VESSEL MFG. N O .9000 -1.3g30 MURATA MFG. K M D R 010 Please use the follow ing recom m ended screw driver. You can order this driver w ith part num ber below . Though you can also adjust the capacitance value by com m ercial products, please use one w hich has the sam e head size as the driver below . Continued on the following page. 1.5 Bit shape: M inus (0.3×0.13) (in m m ) (in m m ) Bit shape: Square (0.54×0.54) 1.5 108 (in m m ) Bit shape: M inus (0.8×0.35) (in m m ) 9000 0.9-30 125 Bit shape: M inus (0.9×0.4) (in m m ) 122 Bit shape: M inus (2.2×0.4) (in m m ) 122 Bit shape: M inus (2.2×0.4) (in m m ) 125 9000 1.3-30 CERAMIC BLADE ELECTRONICS Bit shape: M inus (1.3×30) R ecom m ended A djustm ent Tools !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

n For Automatic Adjustment TZS2 TZY2 TZV2 TZC 3 TZB 4 TZ03 K M B T050 K M B T060 K M B T020 K M B T010 MURATA MFG. K M B T050 MURATA MFG. K M B T060 MURATA MFG. K M B T020 MURATA MFG. K M B T010 Continued from the preceding page. Series MURATA Model Number Manufacturers Model Number Shape (in m m ) 1.8 dia. Bit shape: Square (0.54×0.54) (in m m ) 2.4 dia. 0.6 Bit shape: M inus (0.56 ×0.25) (in m m ) 0.6 2.4 dia. Bit shape: M inus (0.9×0.4) (in m m ) 2.2 dia. Bit shape: M inus (2.2×0.4) R ecom m ended A djustm ent Tools !N ote • Please read rating and !C AU TIO N (for storage, operating, rating, soldering, m ounting and handling) in this catalog to prevent sm oking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MURATA FACTORY Sabae Murata Mfg. Co., Ltd. The products listed herein have been produced by the QS9000 and ISO9001 certified factory ∗ No ODCs (Ozone Depleting Chemicals) are used on any Murata trimmer potentiometers. Qualified Standards
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note T13E.pdf 08.8.27