TZY2Z100A001

T13E MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 44

Technical content

Cat.No.T13E-14 Ceramic Trimmer Capacitors !Note T13E.pdf Aug.10,2012  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

s All the products in this catalog comply with EU RoHS. s EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." s For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. Part Numbering 2 Selection Guide of Ceramic Trimmer Capacitors 3 TZR1 Series 4 TZS2 Series 8 TZY2 Series 12 TZV2 Series 16 TZC3 Series 20 TZW4 Series 24 TZB4 Series 27 TZ03 Series 32 Packaging 37 Recommended Adjustment Tools 39 Qualified Standards 41

CONTENTS

Bluetoothr is a registered trademark or trademark of Bluetooth SIG, Inc. in the United States and other countries.

T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. o Part Numbering (Part Number) qProduct ID TZ Trimmer Capacitors Product ID rMaximum Capacitance Expressed by three-digit alphanumerics. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. Ceramic Trimmer Capacitors tTerminal Shape Code Terminal Shape A B E F N Top Adjustment: Top Adjustment: Rear Adjustment: Top Adjustment: Rear Adjustment: TZR1, TZS2, TZY2, TZV2, TZC3, TZW4, TZB4 (SMD Type) TZB4 (SMD Type) TZB4 (SMD Type) TZ03 (Lead Type) TZ03 (Lead Type) uPackaging Code B00 R00 R01* Bulk Reel (Taping ø180mm) Reel (Taping ø330mm) Packaging wSeries/Terminal Code 6mm Size Lead Type 4mm Size SMD Type 4mm Size SMD Type 3mm Size SMD Type 2mm Size SMD Type (Height 1.0mm) 2mm Size SMD Type (Height 1.25mm) 2mm Size SMD Type (Height 1.45mm) 1mm Size SMD Type (Height 0.90mm) Series/Terminal eTemperature Characteristics Code Z R K P NP0ppm/°C N750ppm/°C N1000ppm/°C N1200ppm/°C Temperature Characteristics Please refer to dimensions for terminal details. * TZB4 only. yIndividual Specifications Code 001 110 169 A10 B10 TZR1, TZS2, TZY2, TZW4 Standard Type TZV2, TZC3 Standard Type TZ03 Standard Type TZB4 No-cover Film Standard Type TZB4 with Cover Film Standard Type Individual Specifications Please refer to ratings for tolerance of temperature characteristics. t A y 001 q TZ u R00 r 200 e R w

T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. Selection Guide of Ceramic Trimmer Capacitors Mounting Method? Surface Mount PCB Insertion Height 0.90mm max. Height 2.6mm max. TZC3 3.2(W) x 4.5(L) TZB4_A 4.0(W) x 4.5(L) TZB4_B 4.0(W) x 4.5(L) TZB4_E 4.0(W) x 4.5(L) TZW4 4.2(W) x 5.2(L) TZ03_F 6.0(W) x 6.0(L) TZ03_N 6.0(W) x 6.0(L) TZB4_A 4.0(W) x 4.5(L) (with cover film) TZB4_B 4.0(W) x 4.5(L) (with cover film) TZB4_E 4.0(W) x 4.5(L) (with cover film) TZR1 1.5(W) x 1.7(L) TZS2 2.2(W) x 2.7(L) TZY2 2.5(W) x 3.2(L) TZV2 2.3(W) x 3.2(L) Height 1.00mm max. Height 3.2mm max. Height 1.25mm max. Height 1.45mm max. Flow Manual InsertionReflow High Frequency Power All Ceramic Trimmer Capacitor products comply with RoHS and ELV.

Ceramic Trimmer Capacitors TZR1 Series 0.35 0.9 max. 1.5 0.45 1.7 0.2 (Depth;0.15) ( Tolerance: ±0.1)in mm Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZR1Z010A001 0.55 1.0 +100/-0% NP0±300ppm/°C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZR1Z1R5A001 0.7 1.5 +100/-0% NP0±300ppm/°C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZR1Z040A001 1.5 4.0 +100/-0% NP0±500ppm/°C 300min. at 1MHz, Cmax. 25Vdc 55Vdc TZR1R080A001 3.0 8.0 +100/-0% N750±500ppm/°C 300min. at 1MHz, Cmax. 25Vdc 55Vdc Insulation Resistance: 10000M ohm Torque: 0.1 to 1.0mNm Operating Temperature Range: -25 to +85°C Cover Metal Rotor Monolithic Stator c Construction c Features 1. Ultra-small and thin with external dimensions of 1.5(W)x1.7(L)x0.85(H)mm (80% less in volume than the current product). 2. Unique construction with no plastic material provides superior soldering heat resistance to maintain excellent characteristic performance after refl ow soldering. 3. Suitable for high frequency circuit due to high self-resonant frequency (6.2GHz of TZR1Z010 at 1.0pF setting). c Applications 1. Bluetoothr 2. Crystal oscillators 3. Crystal fi lters 4. Hand radios 5. Miniature tuner packs (FM Radio, TV) 6. Remote keyless entry systems 7. Pagers T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

-10 -12 -25 -10 0 Z010 (NP0±300 ppm/°C) Temp. (°C) Cap. Change (%) c Temperature Characteristics TZR1Z010 65 85 -10 -12 -25 -10 0 Z1R5 (NP0±300 ppm/°C) Temp. (°C) Cap. Change (%) TZR1Z1R5 200–10 –25 65 85 –10 –12 Z040 (NP0±500 ppm/°C) Cap.Change (%) Temp.(°C) TZR1Z040 0–10–25 45 65 85 –10 –12 R080 (N750±500 ppm/°C) Cap.Change (%) Temp.(°C) TZR1R080 10000 1000 100 0246 Frequency (GHz) 0.55pF set 1.0pF set Z010 Q 81 0 c Frequency Characteristics TZR1Z010 10000 1000 100 0246 Frequency (GHz) 0.7pF set 1.5pF set Z1R5 Q 81 0 TZR1Z1R5 1000 1000 100 Q 100 500 1000 1500 2000 2500 Frequency (MHz) Capacitance (pF) Z040 TZR1Z040 1000 1000 100 Q 100 500 1000 1500 2000 Frequency (MHz) Capacitance (pF) R080 TZR1R080 T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

2.2 1.2 0.5 Tolerance: ±0.1 in mm c Land Pattern Temperature (°C) time (s)t1 Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 times245±3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Standard Profile Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 time230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 times260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Temperature (°C) time (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) Soldering Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350±10°C 3sec. max. 30W max. 1 time Cycle of soldering iron Peak temperature (T5) Peak temperature (T3) c Temperature Profi le c Notice (Storage and Operating Conditions) !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40°C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fi elds (6) Direct sea breeze (7) Other variations of the above

c Notice (Soldering and Mounting) c Notice (Handling) c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 11. Soldering (1) TZR1 series can be soldered by refl ow soldering method and soldering iron. Do not use fl ow soldering method (dipping). (2) Soldering conditions Refer to the temperature profi le. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specifi ed characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 100 micro m to 150 micro m and the dimension of land pattern should be Murata's standard land pattern used at refl ow soldering. Insuffi cient amounts of solder can lead to insuffi cient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to fl ux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only. Do not apply fl ux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fi xed metal rotor or contact failure due to fl ux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the monolithic stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble fl ux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply fl ux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breaking. (3) Use a pick-up nozzle of a suitable dimension. (1.1-1.2mm external diameter and 0.8-0.9mm bore diameter.) 3. Cleaning This product cannot be cleaned because of open construction. 4. Other Note the polarity of the trimmer capacitor to minimize infl uence by stray capacitance. (Refer to the dimensions concerning the polarity.) 1. Use suitable screwdrivers that fi t comfortably in driver slot. *Recommended screwdriver for manual adjustment MURATA: KMDR160 2. When adjusting with a screwdriver, do not apply excessive force (preferably 0.5 N [Ref: 50gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems.

Ceramic Trimmer Capacitors TZS2 Series in mm Tolerance: ±0.1 2.7 1.0 1.0max. 2.2 0.6 0.4

0.20 Depth

Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZS2Z060A001 3.0 6.0 +100/-0% NP0±300ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZS2Z100A001 3.5 10.0 +100/-0% NP0±300ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZS2R200A001 7.0 20.0 +100/-0% N750±500ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc Insulation Resistance: 10000M ohm Torque: 0.5 to 5.0mNm Operating Temperature Range: -25 to +85°C Cover Metal Rotor Monolithic Stator c Construction T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 2 c Features 1. Ultra-small and thin type with external dimensions of 2.2(W)x2.7(L)x0.95(H)mm (30% less in volume than the current product). 2. Unique construction with no plastic material provides superior soldering heat resistance to maintain excellent characteristic performance after refl ow soldering. 3. Pierced square hole allows for high resistance to tuning force and in-process automatic adjustment. c Applications 1. Crystal oscillators 8. Remote keyless entry systems 2. Crystal fi lters 9. PHS 3. Hand radios 10. Radar detectors 4. Cordless telephones 11. W-LAN 5. Cellular telephones 12. Compact radios 6. Tuner packs 13. Headphone stereos 7. Pagers

200–10 –25 65 85 –10 –12 Z060 (NP0±300 ppm/°C) Cap.Change (%) Temp.(°C) c Temperature Characteristics TZS2Z060 200–10 –25 65 85–2 –10 –12 Z100 (NP0±300 ppm/°C) Cap.Change (%) Temp.(°C) TZS2Z100 0–10–25 45 65 85 –10 –12 R200 (N750±500 ppm/°C) Cap.Change (%) Temp.(°C) TZS2R200 Z060 Q 1000 100 500 1000 1500 2000 1000 100 Frequency (MHz) Capacitance (pF) c Frequency Characteristics TZS2Z060 Z100 Q 1000 100 200 600 400 800 1000 1000 100 Frequency (MHz) Capacitance (pF) TZS2Z100 Continued on the following page. T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Continued from the preceding page. R200 Q 1000 100 200 1000 600 800400 1000 100 Frequency (MHz) Capacitance (pF) c Frequency Characteristics TZS2R200 3.2 2.1 1.0 Tolerance: ±0.1 in mm c Land Pattern Temperature (°C) time (s)t1 Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 times245±3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Standard Profile Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 time230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 times260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Temperature (°C) time (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) Soldering Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350±10°C 3sec. max. 30W max. 1 time Cycle of soldering iron Peak temperature (T5) Peak temperature (T3) c Temperature Profi le T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

c Notice (Storage and Operating Conditions) c Notice (Soldering and Mounting) c Notice (Handling) c Notice (Other) T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40°C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fi elds (6) Direct sea breeze (7) Other variations of the above 1. Use suitable screwdrivers that fi t comfortably in driver slot. (1) Recommended screwdriver for manual adjustment MURATA: KMDR050 (2) Recommended screwdriver bit for automatic adjustment MURATA: KMBT050 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. Before using trimmer capacitors, please test after assembly in your particular mass production system. 1. Soldering (1) TZS2 series can be soldered by refl ow soldering method and soldering iron. Do not use fl ow soldering method (dipping). (2) Soldering conditions Refer to the temperature profi le. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specifi ed characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 100 micro m to 150 micro m and the dimension of land pattern should be Murata's standard land pattern used at refl ow soldering. Insuffi cient amounts of solder can lead to insuffi cient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to fl ux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only. Do not apply fl ux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fi xed metal rotor or contact failure due to fl ux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the monolithic stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble fl ux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply fl ux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breakage. (3) Use a pick-up nozzle of a suitable dimension. (1.8mm external diameter and 1.3mm bore diameter.) 3. Cleaning This product cannot be cleaned because of open construction. 4. Other Note the polarity of the trimmer capacitor to minimize infl uence by stray capacitance. (Refer to the dimensions concerning the polarity.)

Ceramic Trimmer Capacitors TZY2 Series 3.2±0.2 2.5±0.2 1.25max. 0.95 1.0 0.45 0.5 1.4 (Tolerance: ±0.1)in mm Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZY2Z010A001 0.5 1.0 +100/-0% NP0±300ppm/°C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZY2Z2R5A001 0.65 2.5 +100/-0% NP0±300ppm/°C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZY2Z030A001 1.5 3.0 +100/-0% NP0±300ppm/°C 300min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2Z060A001 2.5 6.0 +100/-0% NP0±300ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2Z100A001 3.0 10.0 +100/-0% NP0±300ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2R200A001 4.5 20.0 +100/-0% N750±500ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2R250A001 5.5 25.0 +100/-0% N750±500ppm/°C 300min. at 1MHz, Cmax. 25Vdc 55Vdc TZY2K450A001 8.0 45.0 +100/-0% N1000±500ppm/°C 300min. at 1MHz, Cmax. 25Vdc 55Vdc Insulation Resistance: 10000M ohm Torque: 0.5 to 5.0mNm Operating Temperature Range: -25 to +85°C Cover Metal Rotor Monolithic Stator c Construction T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. c Features 1. Small and thin size with external dimensions 2. New shape of cover can improve the fl ux invasion compared with current products. 3. Improvement of the adhesion between rotor and stator leads to superior stability. 4. Unique construction with no plastic material provides superior soldering heat resistance to maintain excellent characteristic performance after refl ow soldering. 5. Suitable for high frequency circuit due to high self-resonant frequency (4.8GHz of TZY2Z010 at 1.0pF setting). c Applications 1. Crystal oscillators 9. Remote keyless entry systems 2. Crystal fi lters 10. W-LAN 3. Pagers 11. Radar detectors 4. Cordless telephones 12. Compact radios 5. PHS 13. DVD 6. Hand radios 14. Burglarproof devices 7. Cellular telephones 15. Headphone stereos 8. Watches

-10 -12 -25 -10 0 Z010 (NP0±300 ppm/°C) Temp. (°C) Cap. Change (%) c Temperature Characteristics TZY2Z010 200–10 –25 65 85–2 –10 –12 Z100 (NP0±300 ppm/°C) Cap.Change (%) Temp.(°C) TZY2Z100 0–10–25 45 65 85 –10 –12 R200 (N750±500 ppm/°C) Cap.Change (%) Temp.(°C) TZY2R200 K450 (N1000±500ppm/°C) Temp. (°C) Cap. Change (%) +12 +10 –10 –12 20 45 025 65 85 TZY2K450 1000 100 02 46 Frequency (GHz) 0.5pF set 1.0pF set Z010 Q c Frequency Characteristics TZY2Z010 Z100 Q 1000 100 200 600 400 800 1000 1000 100 Frequency (MHz) Capacitance (pF) TZY2Z100 Continued on the following page. T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Continued from the preceding page. R200 Q 1000 100 200 1000 600 800400 1000 100 Frequency (MHz) Capacitance (pF) c Frequency Characteristics TZY2R200 1000 100 1000 100 200 Q 400 600 800 Capacitance (pF) Frequency (MHz) K450 1000 100 1000 100 200 Q 400 600 800 Capacitance (pF) Frequency (MHz) K450 TZY2K450 Tolerance: ±0.1 in mm 4.0 2.4 1.2 c Land Pattern Temperature (°C) time (s)t1 Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 times245±3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Standard Profile Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 time230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 times260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Temperature (°C) time (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) Soldering Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350±10°C 3sec. max. 30W max. 1 time Cycle of soldering iron Peak temperature (T5) Peak temperature (T3) c Temperature Profi le T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

c Notice (Storage and Operating Conditions) c Notice (Soldering and Mounting) c Notice (Handling) T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40°C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fi elds (6) Direct sea breeze (7) Other variations of the above 1. Use suitable screwdrivers that fi t comfortably in driver slot. (1) Recommended screwdriver for manual adjustment ENGINEER INC.: DA-89 (Murata P/N is KMDR060) (2) Recommended screwdriver bit for automatic adjustment MURATA: KMBT060 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. 1. Soldering (1) TZY2 series can be soldered by refl ow soldering method and soldering iron. Do not use fl ow soldering method (dipping). (2) Soldering conditions Refer to the temperature profi le. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specifi ed characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 120 micro m to 170 micro m and the dimension of land pattern should be Murata's standard land pattern used at refl ow soldering. Insuffi cient amounts of solder can lead to insuffi cient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to fl ux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only. Do not apply fl ux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fi xed metal rotor or contact failure due to fl ux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the monolithic stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble fl ux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply fl ux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breakage. (3) Use a pick-up nozzle of a suitable dimension. (1.8mm external diameter and 1.3mm bore diameter.) 3. Cleaning This product cannot be cleaned because of open construction. 4. Other Note the polarity of the trimmer capacitor to minimize infl uence by stray capacitance. (Refer to the dimensions concerning the polarity.)

Ceramic Trimmer Capacitors TZV2 Series 3.2±0.2 0.5 Depth 0.2 Marking(6pF) Marking(10pF) Tolerance: ±0.1 in mm 1.0 Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZV2Z2R5A110 0.65 2.5 +100/-0% NP0±300ppm/°C 200min. at 200MHz, Cmax. 25Vdc 55Vdc TZV2Z030A110 1.5 3.0 +100/-0% NP0±300ppm/°C 300min. at 1MHz, Cmax. 25Vdc 55Vdc TZV2Z060A110 2.5 6.0 +100/-0% NP0±300ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZV2Z100A110 3.0 10.0 +100/-0% NP0±300ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc TZV2R200A110 4.5 20.0 +100/-0% N750±500ppm/°C 500min. at 1MHz, Cmax. 25Vdc 55Vdc Insulation Resistance: 10000M ohm Torque: 1.0 to 9.8mNm Operating Temperature Range: -25 to +85°C Cover Spring Washer Metal Rotor Monolithic Stator c Construction T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. c Features 1. Small size with external dimensions of 2. Unique construction with no plastic material provides superior soldering heat resistance to maintain excellent characteristic performance after refl ow soldering. 3. Designed for automatic placement in surface mount applications. 4. Funnel shaped metal case enables in-process automatic adjustment. c Applications 1. Crystal oscillator 9. PHS 2. Crystal fi lters 10. Radar detectors 3. Hand radios 11. W-LAN 4. Cordless telephones 12. Compact radios 5. Cellular telephones 13. Headphone stereos 6. Tuner packs 14. DVD 7. Pagers 15. Burglarproof devices 8. Remote keyless entry systems

200–10 –25 65 85–2 –10 –12 Z2R5 (NP0±300 ppm/°C) Temp.(°C) Cap.Change (%) c Temperature Characteristics TZV2Z2R5 200–10 –25 65 85 –10 –12 Z060 (NP0±300 ppm/°C) Cap.Change (%) Temp.(°C) TZV2Z060 200–10 –25 65 85–2 –10 –12 Z100 (NP0±300 ppm/°C) Cap.Change (%) Temp.(°C) TZV2Z100 0–10–25 45 65 85 –10 –12 R200 (N750±500 ppm/°C) Cap.Change (%) Temp.(°C) TZV2R200 Z2R5 1000 100 Q 500 1000 1500 2000 2500 3000 1000 100 Frequency (MHz) Capacitance (pF) c Frequency Characteristics TZV2Z2R5 Z060 Q 1000 100 500 1000 1500 2000 1000 100 Frequency (MHz) Capacitance (pF) TZV2Z060 Continued on the following page. T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Continued from the preceding page. Z100 Q 1000 100 200 600 400 800 1000 1000 100 Frequency (MHz) Capacitance (pF) c Frequency Characteristics TZV2Z100 R200 Q 1000 100 200 1000 600 800400 1000 100 Frequency (MHz) Capacitance (pF) TZV2R200 Tolerance: ±0.1 in mm 4.0 2.4 1.2 c Land Pattern Temperature (°C) time (s)t1 Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 times245±3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Standard Profile Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 time230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 times260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Temperature (°C) time (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) Soldering Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350±10°C 3sec. max. 30W max. 1 time Cycle of soldering iron Peak temperature (T5) Peak temperature (T3) c Temperature Profi le T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

c Notice (Storage and Operating Conditions) c Notice (Soldering and Mounting) c Notice (Handling) T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. 1. Use suitable screwdrivers that fi t comfortably in driver slot. (1) Recommended screwdriver for manual adjustment VESSEL: No.9000 -0.9x30 (Murata P/N : KMDR020) (2) Recommended screwdriver bit for automatic adjustment MURATA: KMBT020 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40°C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fi elds (6) Direct sea breeze (7) Other variations of the above 1. Soldering (1) TZV2 series can be soldered by refl ow soldering method and soldering iron. Do not use fl ow soldering method (dipping). (2) Soldering conditions Refer to the temperature profi le. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specifi ed characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 120 micro m to 170 micro m and the dimension of land pattern should be Murata's standard land pattern used at refl ow soldering. Insuffi cient amounts of solder can lead to insuffi cient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to fl ux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only. Do not apply fl ux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fi xed metal rotor or contact failure due to fl ux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the monolithic stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble fl ux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply fl ux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breakage. (3) Use a pick-up nozzle of a suitable dimension. (1.8mm external diameter and 1.3mm bore diameter.) 3. Cleaning This product cannot be cleaned because of open construction. 4. Other Note the polarity of the trimmer capacitor to minimize infl uence by stray capacitance. (Refer to the dimensions concerning the polarity.)

Ceramic Trimmer Capacitors TZC3 Series 0.5 2.5 dia. 4.5 0.75 3.2 0.8 0.35 1.6 4.5 0.6 0.6 0.8 Tolerance: ±0.1 in mm Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage Stator/Case Color TZC3Z030A110 1.4 3.0 +50/-0% NP0±300ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Brown TZC3Z060A110 2.0 6.0 +50/-0% NP0±300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZC3R100A110 3.0 10.0 +50/-0% N750±300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc White TZC3P200A110 5.0 20.0 +50/-0% N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Red TZC3P300A110 6.5 30.0 +50/-0% N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Green Insulation Resistance: 10000M ohm Torque: 1.5 to 9.8mNm Operating Temperature Range: -25 to +85°C Center axis Rotor spring terminal Ceramic plate Stator (One molded injection with stator terminal)Stator terminal c Construction c Features 1. Small size with external dimension of 3.2(W)x4.5(L)x1.6(H)mm. 2. Color coded stator permits easy identifi cation of capacitance and reduces mounting errors. 3. Can be adjusted with conventional adjustment tools having a thickness of 0.5mm. 4. Designed for automatic placement in surface mount applications. 5. Heat resistant resin withstands refl ow soldering temperatures. c Applications 1. Compact radios 2. Headphones 3. Pagers 4. Portable radio equipment 5. Hybrid ICs 6. Cellular telephones 7. Cordless telephones 8. Remote keyless entry systems T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

200–10–25 45 65 –10 –12 Temp.(°C) Z030 (NP0±300 ppm/°C) Cap.Change (%) c Temperature Characteristics TZC3Z030 200–10–25 45 65 85–2 –10 –12 Temp.(°C) Z060 (NP0±300 ppm/°C) Cap.Change (%) TZC3Z060 0–10–25 45 65 85 –10 –12 Temp.(°C) R100 (N750±300 ppm/°C) Cap.Change (%) TZC3R100 0–10–25 45 65 85 –10 –12 Temp.(°C)20 P200 (N1200±500ppm/°C) Cap.Change (%) TZC3P200 Z030 1000 100Q 100 500 1000 1500 Frequency (MHz) 2000 1000 100 Capacitance (pF) c Frequency Characteristics TZC3Z030 Z060 Q 1000 100 100 500 2000 15001000 Frequency (MHz) 1000 100 Capacitance (pF) TZC3Z060 Continued on the following page. T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Continued from the preceding page. R100 Q 1000 100 200 600400 800 1000 Frequency (MHz) 1000 100 Capacitance (pF) c Frequency Characteristics TZC3R100 P200 Q 1000 100 200 1000600 800400 Frequency (MHz) 1000 100 Capacitance (pF) TZC3P200 5.0 –0.5 3.3±0.1 1.0±0.1 Tolerance: ±0.1 in mm c Land Pattern Temperature (°C) time (s)t1 Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 times245±3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Standard Profile Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 time230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 times260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Temperature (°C) time (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) Soldering Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350±10°C 3sec. max. 30W max. 1 time Cycle of soldering iron Peak temperature (T5) Peak temperature (T3) c Temperature Profi le T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

c Notice (Storage and Operating Conditions) c Notice (Soldering and Mounting) c Notice (Handling) T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40°C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fi elds (6) Direct sea breeze (7) Other variations of the above 1. Soldering (1) TZC3 series can be soldered by refl ow soldering method and soldering iron. Do not use fl ow soldering method (dipping). (2) Soldering conditions Refer to the temperature profi le. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specifi ed characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 150 micro m to 200 micro m and the dimension of land pattern should be Murata's standard land pattern used at refl ow soldering. Insuffi cient amounts of solder can lead to insuffi cient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to fl ux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only. Do not apply fl ux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fi xed metal rotor or contact failure due to fl ux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble fl ux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply fl ux only to terminals. (8) When soldering the TZC3 series, the solder should not fl ow into the staking part of the substrate. If such fl ow does occur, driver slot rotation will be damaged. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breakage. (3) Use a pick-up nozzle of a suitable dimension. (2.5mm external diameter and 1.5mm bore diameter.) 3. Cleaning This product cannot be cleaned because of open construction. 4. Other Note the polarity of the trimmer capacitor to minimize infl uence by stray capacitance. (Refer to the dimensions concerning the polarity.) 1. Use suitable screwdrivers that fi t comfortably in driver slot. (1) Recommended screwdriver for manual adjustment Standard type --> MURATA: KMDR010 Cross slot type --> VESSEL: NO.9000+1.7×30 (Murata P/N is KMDR080) (2) Recommended screwdriver bit for automatic adjustment Standard type --> MURATA: KMBT010 Cross slot type --> VESSEL: No.CA-11 (Murata P/N is KMBT080) 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system.

Ceramic Trimmer Capacitors TZW4 Series 5.2±0.2 4.2±0.2 2.8±0.2 2.6 max. ( Tolerance: ±0.1 )in mm 0.6 +0.1 -0.20.3 1.6

0.4 Depth

3.0 2.2 Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage TZW4Z010A001 0.4 1.0 +50/-0% NP0±150ppm/°C 200min. at 500MHz, Cmax. 250Vdc 550Vdc TZW4Z1R5A001 0.4 1.5 +100/-0% NP0±150ppm/°C 200min. at 500MHz, Cmax. 250Vdc 550Vdc Insulation Resistance: 10000M ohm Torque: 1.5 to 10.0mNm Operating Temperature Range: -55 to +125°C Cover Metal Rotor Monolithic Stator c Construction c Features 1. To meet high power application due to withstanding voltage 550Vdc. 2. Extremely high self-resonant frequency. (More than 3GHz at rated Cmax.) 3. Typical application: Impedance matching for Cellular Base Station. 4. High Q value in more than VHF, UHF and Microwave bands. (More than 200 in 500MHz, C max.) 5. Available for pick and place machine. Possible thinner design due to 2.6mm low profi le. 6. Non-electrical contact construction (rotor as middle electrode) provides high reliability. c Applications 1. Transmitting power amplifi er for Cellular base station 2. Transmitting amplifi er for PHS base station 3. High frequency electric circuit 4. High power radio transmission 5. Transponder amplifi er for cable TV T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

0 –10 –25–55 45 65 85 105 125 –10 –12 Z1R5 (NP0±150 ppm/°C) Temp. (°C) Cap.Change (%) c Temperature Characteristics TZW4Z1R5 Z1R5 1000 100 Q 500 1000 1500 2000 2500 3000 Frequency (MHz) 1.5pF set c Frequency Characteristics TZW4Z1R5 Tolerance: ±0.1 in mm 4.4 7.0 2.5 c Land Pattern Temperature (°C) time (s)t1 Reflow Soldering Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 times245±3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Standard Profile Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 time230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 times260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Temperature (°C) time (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) Soldering Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350±10°C 3sec. max. 30W max. 1 time Cycle of soldering iron Peak temperature (T5) Peak temperature (T3) c Temperature Profi le T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

c Notice (Storage and Operating Conditions) c Notice (Soldering and Mounting) 1. Soldering (1) TZW4 series can be soldered by refl ow soldering method and soldering iron. Do not use fl ow soldering method (dipping). (2) Soldering conditions Refer to the temperature profi le. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specifi ed characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 150 micro m to 200 micro m and the dimension of land pattern should be Murata's standard land pattern used at refl ow soldering. Insuffi cient amounts of solder can lead to insuffi cient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to fl ux wicking up. (5) When using soldering iron, the diameter of the string solder shall be less than 0.5mm. The string solder shall be applied to the lower part of the terminal only. Do not apply fl ux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fi xed metal rotor or the contact failure due to fl ux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the monolithic stator of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble fl ux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply fl ux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breaking. (3) Use a pick-up nozzle of a suitable dimension. (1.8mm external diameter and 1.1mm bore diameter.) 3. Cleaning This product cannot be cleaned because of open construction. c Notice (Handling) c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. T13E.pdf Aug.10,2012 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (Ex. Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty/dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fi elds (6) Direct sea breeze (7) Other variations of the above 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40°C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 1. Use suitable screwdrivers that fi t comfortably in driver slot. -Recommended screwdriver for manual adjustment VESSEL : No.9000 -1.3x30 (Murata P/N is KMDR130) 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems.

Ceramic Trimmer Capacitors TZB4 Series 2.7±0.3 2.4±0.1 4.0±0.2 4.5±0.2 5.0 1.2±0.1 3.0±0.2 Tolerance: ±0.5 in mm A Type 2.4±0.1 4.0±0.2 4.5±0.2 7.0 1.2±0.1 3.0±0.2 Tolerance: ±0.5 in mm B Type 0.6±0.1 Depth 0.5 4.8 2.4±0.1 4.0±0.2 4.5±0.2 4.5 4.0±0.2 3.0±0.2 Tolerance: ±0.5 in mm 7.0 0.8±0.1 E Type Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage Stator/Case Color TZB4Z030pp10 1.4 3.0 +50/-0% NP0±200ppm/°C 300min. at 1MHz, Cmax 100Vdc 220Vdc Brown TZB4Z060pp10 2.0 6.0 +50/-0% NP0±200ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZB4Z100pp10 3.0 10.0 +50/-0% NP0±300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc White TZB4R200pp10 4.5 20.0 +50/-0% N750±400ppm/°C 500min. at 1MHz, Cmax 100Vdc 220Vdc Red TZB4P300pp10 6.5 30.0 +50/-0% N1200±500ppm/°C 300min. at 1MHz, Cmax 100Vdc 220Vdc Green TZB4P400pp10 8.5 40.0 +50/-0% N1200±500ppm/°C 300min. at 1MHz, Cmax 100Vdc 220Vdc Yellow TZB4Z250pp10 4.0 25.0 +100/-0% NP0±300ppm/°C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black+Marking TZB4R500pp10 7.0 50.0 +100/-0% N750±300ppm/°C 300min. at 1MHz, Cmax 50Vdc 110Vdc Black+Marking c Features 1. Miniature rectangular shape: 4.0(W)x4.5(L)x3.0(H)mm. 2. Color coded case facilitates identifi cation of capacitance range. 3. Designed for automatic placement in surface mount applications. 4. Designed to withstand fl ux baths and solder baths (with cover fi lm type). 5. Can be temporarily attached to PCB with adhesives (Terminal style A and B). 6. Can be refl ow and fl ow (with cover fi lm type) soldering method. 7. Stable characteristics over a wide frequency range. (Resonant frequency: 1000MHz min. / 6pF) c Applications 1. Car audio systems 2. Cordless telephones 3. Hybrid ICs 4. Pagers 5. Remote keyless entry systems 6. Tuner packs 7. Surveillance cameras 8. DVD 9. Burglarproof devices T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. Insulation Resistance: 10000M ohm Torque: 1.5 to 9.8mNm Operating Temperature Range: -25 to +85°C First blank: Terminal Type Second blank: Cover fi lm codes (A: not provided, B: provided) ex. TZB4Z100A B10: Terminal Type is A, and Cover fi lm is provided.

Cover Film (Cover film type) Rotor Terminal c Construction 1.6±0.1 7.0 +0- 0.5 2.4±0.2 (in mm) c Land Pattern/Mounting Holes A Type (in mm) 4.0±0.2 1.6±0.1 8.0 +0 - 0.5 B Type 8.0 +0 - 0.5 4.2±0.2 1.2±0.1 3.2±0.2 dia. (in mm) E Type +10 +20 0–25 +55 +85 –10 Z060 (NP0±200ppm/°C) Temp. (°C) Cap.Change (%) c Temperature Characteristics TZB4Z060 +10 +20 0–25 +55 +85 –10 Z100 (NP0±300ppm/°C) Cap.Change (%) Temp. (°C) TZB4Z100 Continued on the following page. T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Continued from the preceding page. +10 +20 0–25 +55 +85 –10 R200 (N750±400ppm/°C) Cap.Change (%) Temp. (°C) c Temperature Characteristics TZB4R200 +10 +20 0–25 +55 +85 –10 R500 (N750±300ppm/°C) Cap.Change (%) Temp.(°C) TZB4R500 Z060 1000 100 Q 1000 100 800 700 600 500 400 300 200 100900 1000 Frequency (MHz) Capacitance (pF) c Frequency Characteristics TZB4Z060 Z100 Q 1000 100 800 700 600 500 400 300 200 100900 1000 Frequency (MHz) 1000 100 Capacitance (pF) TZB4Z100 R200 Q 1000 100 200100 400 300 500 600 Frequency (MHz) 1000 100 Capacitance (pF) TZB4R200 R500 Q 1000 100 100 500 300 400200 Frequency (MHz) 1000 100 Capacitance (pF) TZB4R500 T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Temperature (°C) t3 time (s)t1 Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu), Eutectic solder (63Sn/37Pb) Temperature (°C) T3T2 time (s) Limit Profile Standard Profile qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu) Limit Profile Standard Profile s!VAILABLEFORTERMINALSHAPE! AND% s)MMERSETHEBODYINSOLDERBATH AVAILABLEFORCOVERFILMTYPE Standard Profile Pre-heating Heating Temp. (T1) Time (t1) Temp. (T2) Time (t2) 1 time150°C 60 to 120sec. 250°C 5sec. max. Temperature (°C) time (s) Standard Profile T1 t2 wSoldering profile for Eutectic solder (63Sn/37Pb) (Limit profile: refer to q) Flow Soldering Profile Reflow Soldering Profile Cycle of reflow Limit Profile Pre-heating Heating Temp. (T1) Time (t1) Temp. (T3) Time (t2) 2 times150°C 60 to 120sec. 265±3°C 5sec. max. Cycle of reflow Standard Profile Pre-heating Heating Peak temperature (T3) Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 2 times245±3°C150 to 180°C 60 to 120sec. 220°C 30 to 60sec. Limit Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T4) Time (t3) 2 times260 +5/-0°C150 to 180°C 60 to 120sec. 230°C 30 to 50sec. Peak temperature (T5) Standard Profile Pre-heating Heating Cycle of reflowTemp. (T1) Time (t1) Temp. (T2) Time (t2) 1 time230 +5/-0°C150°C 60 to 120sec. 183°C 30sec. Peak temperature (T3) Soldering Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350±10°C 3sec. max. 30W max. 1 time Cycle of soldering iron c Temperature Profi le c Notice (Storage and Operating Conditions) T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40°C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Do not store under direct sunlight. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fi elds (6) Direct sea breeze (7) Other variations of the above

c Notice (Soldering and Mounting) c Notice (Handling) 1. Use suitable screwdrivers that fi t comfortably in driver slot. (1) Recommended screwdriver for manual adjustment MURATA: KMDR010 (2) Recommended screwdriver bit for automatic adjustment MURATA: KMBT010 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. 4. Do not break the cover fi lm before the completion of PCB mounting, soldering, and cleaning. 5. Do not clean the trimmer capacitor after the cover fi lm has been broken. 6. To break the cover fi lm, fi rst turn the screwdriver more than 360°, and set the capacitance value. (Inserting the screwdriver only will not break the cover fi lm.) c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. T13E.pdf Aug.10,2012 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 1. Soldering (1) Can be soldered by refl ow soldering method, fl ow soldering method, and soldering iron. (2) Soldering conditions Refer to the temperature profi le. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specifi ed characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 150 micro m to 200 micro m and the dimension of land pattern should be Murata's standard land pattern used at refl ow soldering. Insuffi cient amounts of solder can lead to insuffi cient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to fl ux wicking up. (5) When using soldering iron, the string solder shall be applied to the lower part of the terminal only. Do not apply fl ux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fi xed rotor or contact failure due to fl ux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the plastic case of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommended chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble fl ux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply fl ux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to protect trimmer capacitor from breakage. (3) When bending the terminals, do not apply excessive force to the body of the product to protect the terminal fi xing part from damage. (4) Use a pick-up nozzle of a suitable dimension. > Without cover fi lm type - External dimensions of 4.5x4.0mm and 2.5mm bore diameter. > With cover fi lm type - 4.0mm external diameter and 2.0mm bore diameter. 3. Cleaning [with cover fi lm type] Isopropyl alcohol and ethyl alcohol are available material for cleaning. If you use any other type of solvent, please evaluate performance in your application. Moreover, please confi rm that no damage has occurred to the trimmer capacitor after cleaning in your conditions. 4. Other Note the polarity of the trimmer capacitor to minimize infl uence by stray capacitance. (Refer to the dimensions concerning the polarity.)

Ceramic Trimmer Capacitors TZ03 Series 2.5±0.2 dia. 0.5±0.2 Depth 0.5 min. 6 dia. Tolerance: ±0.5 in mm 1.0±0.1 1.0±0.1 6.6 0.2±0.05 0.25±0.05 4.83.3 F Type 2.5±0.2 dia. 0.5±0.2 Depth 0.5 min. 6.0 dia. 6.0 1.2±0.1 7.8 6.4 3.0 3.4 1.0±0.1 Tolerance: ±0.5 in mm 0.25± 0.05 0.2± 0.05 4.8 3.0 4.0 N Type Part Number C min. (max.) (pF) C max. (pF) TC Q Rated Voltage Withstanding Voltage Stator/Case Color TZ03Z2R3p169 1.25 2.3 +50/-0% NP0±200ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Black TZ03Z050p169 1.5 5.0 +50/-0% NP0±200ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZ03Z070p169 2.0 7.0 +50/-0% NP0±200ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZ03Z100p169 2.7 10.0 +50/-0% NP0±200ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZ03R200p169 4.2 20.0 +50/-0% N750±300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Red TZ03R300p169 5.2 30.0 +50/-0% N750±300ppm/°C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Green TZ03P450p169 6.8 45.0 +50/-0% N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Yellow TZ03P600p169 9.8 60.0 +50/-0% N1200±500ppm/°C 300min. at 1MHz, Cmax. 100Vdc 220Vdc Brown TZ03Z500p169 6.0 50.0 +100/-0% NP0±300ppm/°C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Orange TZ03R900p169 9.0 90.0 +100/-0% N750±300ppm/°C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black+Dot TZ03R121p169 10.0 120.0 +100/-0% N750±300ppm/°C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black Insulation Resistance: 10000M ohm Torque: 2.0 to 14.7mNm Operating Temperature Range: -25 to +85°C A blank column is fi lled with terminal type codes. c Features 1. Color coded case facilitates identifi cation of capacitance range. 2. Sealed construction prevents the penetration of fl ux and dust. 3. Available in two adjustment styles: Top/Rear. 4. Cross-shaped (+) slot enables automatic adjustment. c Applications 1. Car audio systems 2. Car clocks 3. Stereos 4. Radio cassette tape recorders 5. Cordless telephones 6. Video games 7. Compact radio equipment 8. Remote keyless entry systems 9. Burglarproof devices T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Tolerance: ±0.5 in mm c Mounting Holes F Type (Tolerance: ±0.5 in mm) 1.3±0.1 1.1±0.1 33 .3 3 dia. N Type –25 Temp. (°C) Cap.Change (%) Z070 (NP0±200ppm/°C) c Temperature Characteristics TZ03Z070 –25 8555 Temp. (°C)00 Cap.Change (%) R200 (N750±300ppm/°C) TZ03R200 –25 8555 Temp. (°C)00 –10 Cap.Change (%) P600 (N1200±500ppm/°C) TZ03P600 –25 Temp. (°C)00 –10 Cap.Change (%) Z500 (NP0±300ppm/°C) TZ03Z500 Continued on the following page. T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Continued from the preceding page. –25 85 55 Temp. (°C)00 –10 Cap.Change (%) R121 (N750±300ppm/°C) c Temperature Characteristics TZ03R121 1000 100 1001 200 300 400 500 600 700 800 900 1000 1000 100 Q Frequency (MHz) Capacitance (pF) Z070 c Frequency Characteristics TZ03Z070 1000 100 1001 200 300 400 500 1000 100 Q Frequency (MHz) Capacitance (pF) R200 TZ03R200 1000 100 1001 200 300 400 500 1000 100 Q Frequency (MHz) Capacitance (pF) P450 TZ03P450 1000 100 1001 200 300 400 500 1000 100 Q Frequency (MHz) Capacitance (pF) P600 TZ03P600 Continued on the following page. T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Continued from the preceding page. 1000 100 1001 200 300 400 500 1000 100 Q Frequency (MHz) Capacitance (pF) R900 c Frequency Characteristics TZ03R900 Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu), Eutectic solder (63Sn/37Pb) Temperature (°C) Pre-heating Heating T3T2 time (s) Limit Profile Standard Profile Standard Profile Pre-heating Heating Temp. (T1) Time (t1) Temp. (T2) Time (t2) 1 time150°C 60 to 120sec. 250°C 5sec. max. Flow Soldering Profile Cycle of reflow Limit Profile Pre-heating Heating Temp. (T1) Time (t1) Temp. (T3) Time (t2) 2 times150°C 60 to 120sec. 265±3°C 5sec. max. Cycle of reflow Soldering Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output 350±10°C 3sec. max. 30W max. 1 time Cycle of soldering iron c Temperature Profi le c Notice (Storage and Operating Conditions) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -10 to +40°C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Open the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackaging. 7. Do not store under direct sunlight. 8. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fi elds (6) Direct sea breeze (7) Other variations of the above T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

c Notice (Soldering and Mounting) c Notice (Handling) c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 1. Soldering (1) TZ03 series can be soldered by fl ow soldering method and soldering iron. Do not use refl ow soldering method. (2) Soldering conditions Refer to the temperature profi le. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specifi ed characteristics. (3) The dimension of mounting hole should be Murata's standard mounting hole used at fl ow soldering. The amount of solder is critical. Insuffi cient amounts of solder can lead to insuffi cient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to fl ux wicking up. (4) When using soldering iron, the string solder shall be applied to the lower part of the terminal only. Do not apply fl ux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fi xed rotor or the contact failure due to fl ux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the plastic case of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (5) Our recommended chlorine content of string solder is 0.5wt% max. (6) Do not use water-soluble fl ux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply fl ux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5.0 N [Ref: 500gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Use the suitable PCB holes that are the same pitch as the terminal of the trimmer capacitor. If it does not fi t the terminal, excessive stress may be applied to the terminal and the trimmer capacitor may deviate from the specifi ed characteristics. (3) Do not apply bending stress more than 10.0N (Ref: 1kgf) after the trimmer capacitor has been mounted on the PCB. (4) Mount trimmer capacitor in contact with PCB. (5) When bending the terminals, do not apply excessive force to the body of the product to protect the terminal fi xing part from damage. 3. Cleaning Isopropyl alcohol and ethyl alcohol are available material for cleaning. If you use any other type of solvents, please evaluate performance in your application. Moreover, please confi rm that no damage has occurred to the trimmer capacitor after cleaning in your conditions. 4. Other Note the polarity of the trimmer capacitor to minimize infl uence by stray capacitance. (Refer to the dimensions concerning the polarity.) 1. Use suitable screwdrivers that fi t comfortably in driver slot. (1) Recommended screwdriver for manual adjustment MURATA: KMDR010 (2) Recommended screwdriver bit for automatic adjustment MURATA: KMBT010 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1.0 N [Ref: 100gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems.

ø180mm Reel 2500 ø330mm Reel 500 500 500 500 500 100 500 1000 Bulk Minimum Quantity (pcs.) c Minimum Quantity 4.0±0.1 8.0±0.3 2.0±0.1 4.0±0.1 1.5 dia.+0.1 2.0±0.2 1.75±0.1 3.5±0.1 1.8±0.2 1.05±0.2 0.25±0.1 (in mm) c Tape Dimensions TZR1 Series 4.0±0.1 8.0±0.3 2.0±0.1 4.0±0.1 1.5 -0 dia. +0.1 3.0±0.2 1.75±0.1 3.5±0.1 2.5±0.2 1.25±0.2 0.25±0.1 (in mm) TZS2 Series 1.5 +0.1 – 0 dia. 2.0 4.0 A A 2.7±0.2 4.0 3.5 0.25 t 8.0±0.2 1.75 A-Across section t=TZY2 (TZVY2) : 1.6±0.2 TZV2 (TZV02) : 1.9±0.2 3.6±0.2 Tolerance: ±0.1 in mm TZY2/TZV2 Series 1.5 +0.1 – 0 dia.4.9±0.2 A 5.5 1.75 12±0.3 0.3 2.0±0.2 A A-Across section Tolerance : ±0.1 in mm 3.6±0.2 TZC3 Series 12±0.2 1.5 +0.1 – 0 dia.5.6 A 5.5 1.75 0.3 2.6 A A-Across section Tolerance: ±0.1 in mm 4.6 TZW4 Series 1.5 +0.1 – 0 dia. 8.0 2.0 4 .0 A A 1.8 4.3 3.55±0.2 4.8 7.5 5.5 12.0±0.3 0.3±0.1 A-Across section Direction of feed Tolerance: ±0.1 in mm 1.75 TZB4 Series Continued on the following page. T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Continued from the preceding page. (in mm) 13.0±0.5 dia. 21.0±0.8 dia. 2.0±0.5 178±2 dia. 9.0±1.0 50 min. 13.0±1.0 c Reel Dimensions (180mm diameter) TZR1/TZS2/TZY2/TZV2 Series (in mm) 13.0±0.5 dia. 21.0±0.8 dia. 2.0±0.5 178±2 dia. 13.0±1.0 50 min. 17.0±1.0 TZC3/TZW4/TZB4 Series (in mm) 13.0±0.5 dia. 21.0±0.8 dia. 2.0±0.5 328±2 dia. 13.5±1.0 50 min. 17.5±1.0 c Reel Dimensions (330mm diameter) TZB4 Series T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Recommended Adjustment Tools c For Manual Adjustment Series MURATA Model Number Manufacturer’s Model Number Shape TZR1 TZS2 TZY2 TZV2 TZC3 TZB4 TZ03 TZW4 KMDR160 KMDR050 KMDR060 KMDR020 KMDR010 KMDR130 MURATA MFG. KMDR160 MURATA MFG. KMDR050 ENGINEER INC. DA-89 VESSEL MFG. NO.9000 -0.9g30 MURATA MFG. KMDR010 VESSEL MFG. NO.9000 -1.3g30 Please use the following recommended screwdrivers. You can order these drivers using the part numbers below. Although you can also adjust the capacitance value using commercial products, please use one with the same head size as the driver listed below. Continued on the following page. 1.5 Bit shape: Minus (0.3x0.13) (in mm) (in mm) Bit shape: Square (0.54x0.54) 1.5 108 (in mm) Bit shape: Minus (0.8x0.35) (in mm) 9000 0.9-30 125 Bit shape: Minus (0.9x0.4) (in mm) 122 Bit shape: Minus (2.2x0.4) (in mm) 125 9000 1.3-30 CERAMIC BLADE ELECTRONICS Bit shape: Minus (1.3x30) T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

Recommended Adjustment Tools c For Automatic Adjustment TZS2 TZY2 TZV2 TZC3 TZB4 TZ03 KMBT050 KMBT060 KMBT020 KMBT010 MURATA MFG. KMBT050 MURATA MFG. KMBT060 MURATA MFG. KMBT020 MURATA MFG. KMBT010 Continued from the preceding page. Series MURATA Model Number Manufacturer’s Model Number Shape (in mm) 1.8 dia. Bit shape: Square (0.54x0.54) (in mm) 2.4 dia. 0.6 Bit shape: Minus (0.56x0.25) (in mm) 0.6 2.4 dia. Bit shape: Minus (0.9x0.4) (in mm) 2.2 dia. Bit shape: Minus (2.2x0.4) T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.

T13E.pdf Aug.10,2012 !Note  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. MURATA FACTORY Sabae Murata Mfg. Co., Ltd. The products listed herein have been produced by a QS9000 and ISO9001 certified factory ∗ No ODCs (Ozone Depleting Chemicals) are used on any Murata trimmer potentiometers. Qualified Standards

!Note T13E.pdf Aug.10,2012  Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.