TZ1606A TAI-SAW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. SMD 3.2x2.5 26.0MHz Crystal Unit MODEL NO.: TZ1606A REV. NO.: 5 Revise: Rev. Rev. Page Rev. Account Date Ref. No. Revised by N/A Initial release Change T/R drawing ESR change to 40ohm Add Co & C1 spec. Pin connection updated 04/07/09 07/01/09 07/14/09 11/12/09 12/10/10 N/A ECN-200900240 ECN-200900298 ECN-200900468 ECN- Ann Liu Ann Liu Ann Liu Ann Liu Ann Liu

TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. SMD 3.2x2.5 26.0MHz Crystal Unit MODEL NO.: TZ1606A REV. NO.: 5 Features: z Surface Mount Hermetic Package z Excellent Reliability Performance z Good Frequency Perturbation and Stability over temperature z Ultra Miniature Package Description and Applications: Surface mount 3.2mmx2.5mm cr ystal unit for use in wireless communications devices, especially for a need of ultra miniature package for mobility. Electrical Specifications: TZ1606A Specification Nominal Frequency 26.000000 MHz Mode of Oscillation Fundamental Storage Temperature Range -40°C to +85°C Operating Temperature Range -40°C to +85°C Frequency Perturbation +/-0.50 ppm Frequency Stability over Operating Temperature Range(referred to the value at 25°C) Frequency Make Tolerance (FL) +/-10 ppm @ 25°C +/- 3°C Equivalent Series Resistance (ESR) 40 Ω max. Drive Level 250uW max. Load Capacitance (CL) 22 pF Shunt Capacitance (Co) 0.8pF +/-20% Motional Capacitance (C1) 3.1fF +/-10% Trim Sensitivity (TS) 2.9 ppm/pF +/-10% (Load @ 22pF) Insulation Resistance 500 MΩ min./DC 100V Aging +/-1ppm max first year, +/-1.5ppm max. second year +/-2.5ppm max. after 5 years +/-5ppm max. after 10 year RoHS Compliant Lead free Lead-free soldering

TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document Marking Laser Marking Unit Weight 0.017+/-0.005 g Mechanical Dimensions (mm): Recommended Land Pattern: (unit: mm) Marking: Line 1: Frequency (26.00) Line 2: TST Logo + Crystal Product Code + Date Code + Traceability code ( 1 or 2 letters) The inner vision of Pin#2, Pin#3 side is XTAL blank mounting pad. Product Code Table Pin#1 Pin#2 Pin#4 Pin#3

TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document Date Code Table Reel Dimensions (mm): Tape Dimensions (mm): [NOTE]: 1. Unless otherwise specifie d tolerance on dimension +/-0.1 mm. 2. Material: conductive polystyrene with color black. 3. 10 pitch cumulative tolerance +/-0.2 mm. Packing Quantity/Packing: 3K pcs maximum per reel WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 ABCDEFGH I JKLM WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 NOPQRSTUVWXYZ WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 abcdef gh i j k lm WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 nopqrs t uvwxyz

TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document Reflow Profile: Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec

TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document Reliability Specifications Reference standard resistance to Temp./ Duration : 260°C /10sec ×2 times EIAJED-4701 Soldering heat Total time : 4min.(IR-reflow) (IR reflow) -300(301)M(II) Vibration Total peak amplitude : 1.5mm MIL-STD 202F Vibration frequency : 10 to 55 Hz method 201A Sweep period : 1.0 minute Vibration directions : 3 mutually perpendicular Duration : 2 hr / direc. Mechanical directions : 3 impacts per axis MIL-STD 202F Shock Acceleration : 3000g's, +20/-0 % method 213C Duration : 0.3 ms (total 18 shocks) Waveform : Half-sine Solderability Solder Temperature:265±5°C MIL-STD 883G Duration time: 5±0.5 seconds. method 2003 Thermal Shock Heat cycle conditions MIL-STD 883G -55 ℃ (30min) ←→ 125 ℃ (30min) method 1010.7 * cycle time : 10 times Humidity test Temperature : 70 ± 2 °C MIL-STD 202F Relative humidity : 90~95% method 103B Duration : 96 hours Dry heat Temperature : 125 ± 2 °C MIL-STD 883G ( Aging test ) Duration : 168 hours method 1008.2 condition C PCT test Pressure: 2.06kg/cm 2 (2.03*105 pa) EIAJED-4701-3 Temperature : 121 ± 2 °C B-123A Relative humidity : 100% Duration : 24 hours Environmental characteristics Mechanical characteristics Test name Test process / method