TYN412-RG STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

TXN/TYN 0512 ---> TXN/TYN 1012 April 1995 SCR Symbol Parameter Value Unit IT(RMS) RMS on-state current (180° conduction angle) TXN TYN Tc=80°C Tc=90°C 12 A IT(AV) Average on-state current (180° conduction angle,single phase circuit) TXN TYN Tc=80°C Tc=90°C ITSM Non repetitive surge peak on-state current ( Tj initial = 25°C) tp=8.3 ms 125 A tp=10 ms 120 I2tI 2t value tp=10 ms 72 A 2s dI/dt Critical rate of rise of on-state current Gate supply : IG = 100 mA diG /dt = 1 A/µs

100 A/ µs

Storage and operating junction temperature range - 40 to + 150 - 40 to + 125 Tl Maximum lead temperature for soldering during 10 s at 4.5 mm from case 260 °C TO220AB (Plastic) K A G .HIGH SURGE CAPABILITY .HIGH ON-STATE CURRENT .HIGH STABILITY AND RELIABILITY .TXN Serie : INSULATED VOLTAGE = 2500V (RMS) (UL RECOGNIZED : E81734)

DESCRIPTION

Symbol Parameter TYN/TXN Unit 0512 112 212 412 612 812 1012 VDRM VRRM Repetitive peak off-state voltage Tj = 125°C 50 100 200 400 600 800 1000 V ABSOLUTE RATINGS (limiting values)

FEATURES

The TYN/TXN 0512 ---> TYN/TXN 1012 Family of Silicon Controlled Rectifiers uses a high per- formance glass passivated technology. This general purpose Family of Silicon Controlled Rectifiers is designed for power supplies up to 400Hz on resistive or inductive load.

GATE CHARACTERISTICS (maximum values) Symbol Parameter Value Unit Rth (j-a) Junction to ambient 60 °C/W Rth (j-c) DC Junction to case for DC TXN 3.5 °C/W TYN 2.5 Symbol Test Conditions Value Unit IGT VD =12V (DC) R L=33Ω Tj=25°C MAX 15 mA VGT VD =12V (DC) R L=33Ω Tj=25°C MAX 1.5 V VGD VD =V DRM R L=3.3kΩ Tj= 125°C MIN 0.2 V tgt V D =V DRM IG = 40mA dIG /dt = 0.5A/µs Tj=25°C TYP 2 µs IL IG = 1.2 IGT Tj=25°C TYP 50 mA IH IT= 100mA gate open Tj=25 °C MAX 30 mA VTM ITM= 24A tp= 380µs Tj=25 °C MAX 1.6 V IDRM IRRM VDRM Rated VRRM Rated Tj=25°C MAX 0.01 mA Tj= 125°C3 dV/dt Linear slope up to VD =67%V DRM gate open Tj= 125°C MIN 200 V/ µs tq V D =67%V DRM ITM = 24A V R = 25V dITM /dt=30 A/µsd V D /dt= 50V/µs Tj= 125°C TYP 70 µs PG (AV)=1 W P GM = 10W (tp = 20µs) I FGM = 4A (tp = 20µs) V RGM =5 V .

ELECTRICAL CHARACTERISTICS

TXN/TYN 0512 ---> TXN/TYN 1012

Fig.3 : Maximum average power dissipation versus average on-state current (TYN). Fig.4 :Correlation between maximum average power dissipation and maximum allowable temperatures (Tamb and Tcase) for different thermal resistances heatsink + contact (TYN). Fig.1 : Maximum average power dissipation versus average on-state current (TXN). Fig.2 :Correlation between maximum average power dissipation and maximum allowable temperatures (Tamb and Tcase) for different thermal resistances heatsink + contact (TXN). Fig.5 : Average on-state current versus case temperature (TXN). Fig.6 : Average on-state current versus case temperature (TYN). TXN/TYN 0512 ---> TXN/TYN 1012

Fig.9 : Non repetitive surge peak on-state current versus number of cycles. Fig.10 :Non repetitive surge peak on-state current for a sinusoidal pulse with width : t≤ 10 ms, and corresponding value of I2t. Fig.8 :Relative variation of gate trigger current versus junction temperature. 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 0.01 0.1 Zth/Rth Zth(j-c) Zth(j-a) tp(s) Fig.7 :Relative variation of thermal impedance versus pulse duration. Fig.11 :On-state characteristics (maximum values). TXN/TYN 0512 ---> TXN/TYN 1012

Cooling method : by conduction (method C) Marking : type number Weight : 2.3 g Recommended torque value : 0.8 m.N. Maximum torque value : 1 m.N. A G J H D B C M L F O P =N= I REF. DIMENSIONS Millimeters Inches Min. Max. Min. Max. A 10.00 10.40 0.393 0.409 B 15.20 15.90 0.598 0.625 C 13.00 14.00 0.511 0.551 D 6.20 6.60 0.244 0.259 F 3.50 4.20 0.137 0.165 G 2.65 2.95 0.104 0.116 H 4.40 4.60 0.173 0.181 I 3.75 3.85 0.147 0.151 J 1.23 1.32 0.048 0.051 L 0.49 0.70 0.019 0.027 M 2.40 2.72 0.094 0.107 N 4.80 5.40 0.188 0.212 O 1.14 1.70 0.044 0.066 P 0.61 0.88 0.024 0.034 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectronics.  1995 SGS-THOMSON Microelectronics - Printed in Italy - All rights reserved. SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Nether- lands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. TXN/TYN 0512 ---> TXN/TYN 1012