TXMC895 TEWS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.0.0 13.12.2021 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 E-Mail: info@tews.com www.tews.com The Embedded I/O Company TXMC895 Four Channel 10/100/1000 Mbit/s Ethernet TXMC895-10R
Application Information
The TXMC895 is a Switched Mezzanine Card (XMC) compatible module providing a four channel Ethernet 10Base-T / 100Base-TX / 1000Base-T interface. A PCIe Switch provides access to the Intel I210IT Gigabit Ethernet controllers. Each Ethernet interface supports 10, 100 and 1000 Mbit/s transmission rates and is equipped with a 16 Mbit Serial Flash to support PXE and iSCSI boot. The four Ethernet interfaces of the TXMC895 are capable of performing an auto negotiation algorithm which allows both link-partners to determine the best link-parameters. The TXMC895 supports IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping (with software extensions). The TXMC895-10R provides four 10/100/1000 Mbit/s Ethernet connections via front panel RJ45 connectors. All ports are galvanically isolated from the Ethernet controllers and LEDs on the board indicate the different network activities. The module meets the requirements to operate in extended temperature range from -40°C to +85°C. Software Support: o Software support for Intel I210IT at www.intel.com o For operating systems not supported by Intel, please contact TEWS.
TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.0.0 13.12.2021 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 E-Mail: info@tews.com www.tews.com The Embedded I/O Company Technical Information Form Factor: Short single-width XMC module conforming to ANSI/VITA 42.0 Board size: 124 mm x 74 mm x4 PCI Express 2.1 compliant interface conforming to ANSI/VITA 42.3 IPMI resource: FRU hardware definition information stored in on-board EEPROM Four Intel I210IT Gigabit Ethernet controllers Four RJ45 connectors 1000Base-T 100Base-TX 10Base-T IEEE 1588/802.1AS Precision Time Protocol (PTP) V1 and V2 PTP frame format IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaper (with software extensions) 16 Mbit serial flash for every channel storing configuration data and providing memory for Boot ROM Operating temperature -40°C to +85°C, constant airflow of 2m/s is required MTBF (MIL-HDBK217F/FN2 G B 20°C) TXMC895-10R: 581000 h Order Information RoHS Compliant TXMC895-10R Four Channel 10/100/1000 Mbit/s Ethernet, Intel I210IT, RJ45 For the availability of non-RoHS compliant (leaded solder) products please contact TEWS. Documentation TXMC895-DOC User Manual