TX26D80VC1CAA HITACHI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 19

Technical content

pol 7. poy Electron Tube & Devices Division Hitachi, Ltd ‘ Date : Nov. 21,°95 For Messrs CUSTOMER'S ACCEPTANCE SPECIFICATIONS TECHNICAL DATA <2 TX26D8OVCICAA

CONTENTS

| = | RECORD OF REVISION 3284TTD 0431-1 | — | APPLICATION 3284TTD 0431-1 [ir [assourre macnn RaviNGS | __seeatmD oai—i | 171 Ca [orticat Guracenrstics | sasarmmcati-t_—— | 172-272 a muecraical Gumacrenistics| saa oaict | VT 4 | BLOCK DIAGRAM EC Cs | TereRrace pin connection | __aaearrmcasict | 1724/2 | vy,| [S| INTERFACE TIMING 3284TTD 0431-1 -1/3~3/3 " DINENSTONAL OUTLINE | 8 | DESIGNATION OF LOT MARK 3284TTD 0431-1 fio] PRECAUTION =| ~SSSz8aTT@ cain | 13-1/4na/4 Electron Tube & Devices sh 3284TTD 0431-1 Pass | 1-1/1 Division, Hitachi, Ltd No. 806-4 2d 195-1 SZ0EEOPOLL+ “OLT VOISIAY IHOVLIH-#Os 3 PO=02 0O-L1-AON

) a I ON ae tes 806-4 0d 195-1 SZ0E6OROLL+ “QL VOISINV THOVAIH-845 70:02 00-L1-AW

APPLICATIONS

This specification is applied to the following TFT Liquid Crystal Display Module with Back-Light unit. Note : Inverter device for Back-light is not built in so it should be prepared by yourself. 33 + Type Name : TR26DBOVCICAA + Display Area : H246xv184.5 (om) + Display Dots : H(800x3) xV600 [dots] Misplay Pixels) Gi800xV600 pixels) + Color Pixel Arrangement : R-G-B Vertical Stripe + Display Mode : Transmissive Mode Normally White Mode + Color Number : 262k Colors + Viewing Angle : 6:00 Direction 43 + Dimensions Outline : 276. SXV199. Oxts8. 0 (am) sa + Weight : Less than 500 [g) 805-4 02/0 d 195-1 SZOESOFOLL+ *OL7 VORSRIY HHOVLH-8O74 vO:02 00-11-Ken

  1. ABSOLUTE MAXIMUM RATINGS 1, 1 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS ITEM OPERATING STORAGE fr | noce| [vieration | - [seas] - | weaml | a | ee [corrosive Gas | NOT ACCEPTABLE | NOT ACCEPTABLE | — |_| Tiluminance of LCD $0, 000 50, 000 surface Note 1) Environmental temperature and humidity of this unit, not of system 23} installed with this unit. = At low temperature the brightness of CFL drop and the life time of CFL become to be short. 2) Ambient temp. Ta 4 40U : 85%RH MAX Without condensation Ta > 400 : Absolute humidity must be lower than the humidity of 8S%RH at 400. Without condensation 3) 20~50Hz. 4) 7ms. 1. 2 ELECTRICAL ABSOLUTE MAXIMUM RATINGS (1) ‘TFT LIQUID CRYSTAL DISPLAY MODULE Vs s=0V [trem __—‘[emmon] win [wax [ wir | nore | Pover Supply Wolters [we |e | «3 | vj | meseneasoetive eee a Note 1) Vsyne, Hsync, DTMG, DCLR, RD, GD, BD, are subjected 2) 200pF-250M 25U—70%RH 3) I/F connector pins are subjected 4) The surface of Metal bezel and LCD panel are subjected. (2) BACK-LIGHT UNIT (TEM [srmok | win [MAK | UNIT [ase Vottare st | 0 | 2000 TV 805-4 02/906 195-1 S2OESOFOLL+ “OL VOISRW IHOVLIH-8O24 0:02 GO-i1-eW
  1. OPTICAL CHARACTERISTICS The following (tems are measured when the conditions of this unit (IFT panel and Back-light) and measuring systems are stable. The ambient light excluding Back-light is nothing. + Measuring equipment : TOPCON BM-7, Prichard 1980, or equivalent Temperature of LCD=25T, Veo". 3V, fv =60Hz, 1. =3. SmA SWsot | CONDITION | WIN [TYP._[MAX | UNIT | NOTE x La] -|- [2 ' ee te C= [ss | esponse Time ti | [Brightness (white) | Teh | [= [7 [= [eee] | Note 1) Definition of Viewing Angle FS 43 @=0° A z A $=90° /} (12:00) a Ly | \\ / “ goin. Q YX SET NG ona ae a oe TET/LCN Q a I % y’ $2270" 7 (6:00) [ence bof ele] mens fel we 806-4 «02/90 d = 195-1 S20E60r 022+ “QL7 VOISRW |HOVLH-BO44 $0202 O0-11-KOW

Note 2) Definition of Contrast Ratio (CR R= Brightness when displaying White rastar Brightness when displaying Black rastar Note 3) Definition of Response Time t 100 Rosponse to LP} a sh p No. 806-4 02/20 d 295-1 S20E60P011+ “OL7 VOISRAV |KOWLIH-B044 $0702 O0-11-AEW

(1) TFT LIQUID CRYSTAL DISPLAY MODULE Tam2SU, V..=0V [tte Tsrmony win [re [wax [uit] sore | Power Supply Voltas | We | 30 | 33 | a6 | v [| taput Voltage for [Hi| Vie @Tox%.| — | Yoo | Power Supply Current [te | - | 190 | #370 «| wA 2. 3) | [terac Freauency | & | — | 28] saa [em || Note 1) Display data pins and Timing signal pins are subjected 2) fv=60Hz, {CLK=36MHz, Veo=3. 3V, DC Current

2 TFT/LCM

a) los Vos Typical value is measured when displaying Black rastar. Maximum is measured when displaying Pixel—checkers. 3) Current capacity for Vse power source should be larger than 3A (2) BACK-LIGHT UNIT Ta=2st [ttew | swmou] win [orm [max | wr [wre oe ee ee ey teartee tne wees | wee] Note 1) Higher I, cause the short life time of CFL 2) Lamp frequency may produce interference with Hsyne frequency, causing beat or fliker on the display. Therfore lamp frequency shall be as different as possible from Hsync frequency, to avoid interference. 3) Tarot i 4) Regarding output voltage of transformer on inverter circuit, when output is open, more than i700V is recommended. No. BO5-4 02/80 d 295-1 S20E60R02+ “QL7 VOISIAV |HOWLIH-8044 50:02 O0-11-AeW

  1. BLOCK DIAGRAM (1) TFT LIQUID CRYSTAL DISPLAY MODULE fCNL GL Tising signal | ca lay ¢ ini f ee) Lining I fl TFT-LCD Converte: D DC Power oP } supply | a (2) BACK-LIGHT UNIT ws! cue GND Ve Mi Sh. pase 1-1/1 No. 806-3 02/80'd 195-1 S20E60ROL2+ “O17 VOIS3 HOV IH-943 $0°02 00-11-4en
  1. INTERFACE PIN ASSIGNMENT (1) TFT LIQUID CRYSTAL DISPLAY MODULE ~ CN1_CHIROSE: DF9B~41P—1) V2 ER Dot Clock [S| Vsyne [Vertical Synchronization [st ss | Cr? | ss | GD COW Cs ss | ER GS a a aS ae] Gi iL. AST a aS a ER Ci i C_i4_ ft Red (—is_|_as se | Le Ves Aen | as et a | Be | [43_ ft Gs ae es a a ee Te GR GT | | es Ee PS Sa EE Ete Be Ce =” a ae Le ee ee eT x ee PO | SOE Net + SCE RG EE Note 1) Vas pins should be connected to GND (OV). Metal bezel is connected internsiy to Vas. - ‘ 2 ALL Ves pins shoule be connected to +3. 3¥. - 3) Keep open Hitachi test use only. (2) BACK-LIGHT UNIT (Bin Nol SYMBOL] SES LT PTTO EEaaeen eRe! Ct | Y| Fower Su ) | SEED SUE a el a ee el es oe 806-4 O2/0L'd 195-1 S20e60r0r2+ "OL7 WORMBIY IHOVLIH-B014 90:02 00-t1-4en

RELATIONSHIP BETWEEN DISPLAYED COLOR AND INPUT DATA BLACI 0701010101010;10101010;01/0:01010;0,0 ~WHOr-“TTHITi tit tlototetoroteletototo tote ao droraterere THITITT It Ororot ot oro Basic |" BLUE ~lolotoloropelorotororo;o; iris iiipia CT CC A ea a a RRR RR REE coor \\TWaN -~jototetorotoliritititriti {ity is —_ — Ya ben oe acbeee se ch on we be op hee — va bas le ae che aa be. "7 it 7 t ate Titra cNaSEONESES csaeuasuases Eb EW TooToo roT iT OTopoloT oto o To} 070; 070 z ai) be +{- tah “1% ab 4- TOTO Srototetote , mariage thie ait hat tiitat eat otitis a He triittttiteteteeteroreterersterote ia) a BrorerTey are grareryrore BLACK 0 0 0 0 0 0;0!0 6 795.9 OTOTOTOTo 0 TGENEDTO TOTO Or OLeT Oro oroloritororosorore ~GEENEDT O07 -O1 OT oT Ol OT oT OT Oris Ol oro; or oroy gs ae PCCP CELE EET EE! GREEN TD wpoperapaye TIT Toe aro a rtototote IMtitiitelsotetorote - Go eT ee euaenaens Totoro oro, BLAC OLOpO;O;O;O{O; Or oro; oO; OToToror aid) e rierototetotatotoroterorolerorororor ty “ww frlorestoole opotetore riper E x rototeropolititiiiy iso Be ee eieretetereterereterstiirte tite rg Note 1) Definition of gray scale : Color (mn) --- n indicates gray scale level. Lower n means brighter level. 2) Data : 1:Hi, O:Lo Pana fof eS] mewn Pel 806-4 OZ/iNd = L9G-1 S20¢60r0LL+ “OL) VOISBNY IHOVLIH-BO24 90:02 00-11-AeW

  1. 1 TIMING CHART Mata : Latched at Fall edge of DCLH turstvs Care tr trestee bisetor syne, Vsyne, DTNG, DATA cand + umax. tous been two breve teeve DeLE L.§ tes 23) rit i! DATA Invalid Data | Invalid Data tural ca] ome DCLE S| tem Hsyne \\ \\ tev Ysync ) ) tae os syne DTMG tve Vayne | | DING D * pass 9-1/3 No. 806-4 «02/21 = L95-1 SZOESOFOLL+ "QL7 VOISINV IHOWLIH-@O44 20:02 00-11-AOn
  1. 2 INTERFACE TIMING SPECIFICATION [Period [tee [25 [ao | - | || ; Pe Ce Se ee Ce Ce ee ee [Rise Tie [tee| - | - | % | [Fall Tie [tere] - | - | 38 _| [Set w tise [es | 6 | - | -_ |Pertod | ter _[t052~tess] (1024) | 1200 _| | Set up Tine | up Time ft. | o [| - | —- | tor Heras | CXC ae Ce a [widen-active [tee [1 [= | 4 | [Rise/Fall Timdts..te| - | - | 80 | as | | Cae ee a a [Rise/Falt Tiadts ta] - | - | 90 [as [| Horizontal [| Back Porch Horizontal ae Front Porch Vertical [= | Back Porch Vertical Front Porch [Wold Time [te | 6 | - | - | [Rise/Fall Tings te] - | - | 28 [ss] | Fons we eed aves]] termes foe] 280 No. 806-4 O2/EL'd 195-1 S20es0r0LL+ “OL7 VoISRIV WHOVLIH-8044 20:02 O0-11-en
  1. 3 TIMING BETWEEN INTERFACE SIGNAL AND POWER SUPPLY 40nsMi i sMax | . Ov Power supply 1v, 3 3:3 Ww v, ov os 0.75¥e0 VALID lycer face 0. 25%pp ee ve POWER ON POWER OFF * Set OV SV, (t) S Veo (t). Here, V, (t), Veo (t) Indicate the transitive state of Vi, Vee when power supply is turned ON or OFF. NOTE 1) Do not keep interface signal high-impedance when power on. tee i ; = Pas 9-3/3 No. 806-43 02/Pl'd 198-1 SZ0E6OROLLY “O11 VOIS3MY THOVLIH-BO24 20:02 00-11-€en
  1. DIMENSIONAL OUTLINE | i Tog) aasaes a | 4 il i . ile | | | 100; aa] |. i | als | Tazo | | + | at . 7, _g ee ee | 2 OTH A nn

3 LASe0A ail fy

re — == Sealen TS Note 1) CN ; Hirose DFSB-41P-IV “ t Mating side conenter’) ~ DFS*-41S-1V 2) CN2: J. & T. BHR-O3VS-1 Cable length is about 50mm. ( Mating side eeinestee) SMO2 (8. 0) B-SHS-TB 3) Tolerance not specified is +0. Sam 4) Dimensions in parenthesis are reference value. 5) Position, size and form of tab and grooves on Metal bezel are not specified FE os ed No. 806-4 O2/S1'd 195-1 S20E60r0L1+ “O17 VOISRAV IHOVAIH-B024 80:02 00-t1-Aen

i 83. DESIGNATION OF LOT MARK 8 1 LOT MARK LIOOOUOUOUOUO ee | Optional | I Ihe “ sat Wenth Ls sigit cunbor (00001-90990) NOTE 1) Optional Mark for HITACHI. 2) Year (& [mare | s | o6{7{etototif2zftatsy|s | 3) Month [ware [ata i[ec}ovte;rye{ujsje}els| 8 2 LOCATION OF LOT MARK Lot mark is printed on Label. And Label is attached to the surface of Metal bezel. “ The form of character will be changed without notice. i rd = osc No. W06-4 82/91'd 198-1 S2GES0r0L1+ "QL1 YONI IHOVLIH-O44 80:02 00-11-Ken

i 83. DESIGNATION OF LOT MARK 8 1 LOT MARK LIOOOUOUOUOUO ee | Optional | I Ihe “ sat Wenth Ls sigit cunbor (00001-90990) NOTE 1) Optional Mark for HITACHI. 2) Year (& [mare | s | o6{7{etototif2zftatsy|s | 3) Month [ware [ata i[ec}ovte;rye{ujsje}els| 8 2 LOCATION OF LOT MARK Lot mark is printed on Label. And Label is attached to the surface of Metal bezel. “ The form of character will be changed without notice. i rd = osc No. W06-4 82/91'd 198-1 S2GES0r0L1+ "QL1 YONI IHOVLIH-O44 80:02 00-11-Ken

  1. 2 OPERATING PRECAUTION (1) The spike noise causes the mis-operation of circuits. Be lower the spike noise as follows : Veo=+200mV, V,=t200mV (Over and under shoot voltage) (2) Response time depends on the temperature. (In lower temperature, it becomes longer). And also Transmittance and Color depend on the temperature. (3) Brightness depends on the temperature. (In lower temperature, it becomes lower). And in lower temperature, response time (required time that brightness is stable after turn on) becomes longer. (4) Be carefull for condensation at sudden temperature change, & Condensation make damage to polarizer or electrical contact part. And after fading condansation, smear or spot will occur. (5) When fixed patterns are displayed at long times, afterimage is likely to occur. (6) Module has high frequency circuit. If you need to shield the electromagnetic noise, please do in yours. (7) When Back-light unit is operating, it sounds. If you need to shield the noise, please do in yours. (8) Please connect the Back-light connector to the inverter circuit directly. The long cable between CFL and the inverter may cause the brightness drop of CFL and may cause the rise of starting lamp Voltage (Vs). SF (9) Do not connect or remove the module from main system with power applied 10. 3 ELECTROSTATIC DISCHARGE CONTROL Since Module is composed with electronic circuit, it is not strong to electrostatic discharge. Make certain that treatment persons are connected to ground through list band etc.. And don't touch I/F pin directry. 10. 4 PRECAUTION FOR STRONG LIGHT EXPOSURE Strong light exposure causes degradation of polarizer and color filter. & Pag 13-2/4 fe se 806-4 O2/81'd = 295-1 SZ0E80r0L1+ “O17 VOIMaW |HOWLIH-B0s4 30502 00-11-KOn
  1. 5 STORAGE When storing Module as spares for long time, the following Preccautions are necessary. (1) Store them in a dark place ; do not expose then to sunlight or fluorescent Light. Keep the temperature between SC and 35U at normal humidity. (2) The polarizer surface should not come in contact with any other object. It is recommended that they be stored in the container in which they were shipped (33 10. 6 HANDLING PRECAUTIONS FOR PROTECTION FILM () When the protection film is pealed off, static electricity is generated between the film and the polarizer. This film should be pealed off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or Im such a condition, etc. (2) The protection film is attached to the polarizer with a small amount of glue. [f some stress is applied to rub the protection film against the polarizer during the time you peal off the film the glue is apt to remain more on the polarizer. So please carefully peal off the protection film without rubbing it against the polarizer, (3) When the Module with protection film attached is stored for long a time, sometimes there remains a very small amount of glue, still on the polarizer after the protection film is pealed off. Please refrain from storing the Module at the high temperature and high humidity for giue Is apt to remain in these condition (4) The Glue may be taken for the Modules failure, but you can remove the Glue easily. When the glue remains on the polarizer surface or its vestige ls recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with Normal—hexane. Es ec 806-3 O2/6i'd 285-1 S20E6OPOLL+ “OL7 VOISIW |HOWLIH-BOs 4 60:02 00-11-<th
  1. 7 SAFETY (1) If Module ts broken, be careful to handle not to injure. (TFT/LCD and Lamp are made of glass.) Please wash hands sufficiently when you touch the liquid crystal coming out from broken LCDs. : (2) As it is possible for PCB or other electronic parts of module to smell to smoke and to take fire because of the short circuit. Please design the circuit of your instrument not to flow the electric current to TFT/LCD module more than 1A (by apply the fuse for example). (3) As Back-light unit has high voltage circuit internal, do not open i f the case and do not insert foreign materials in the case, (383 | . Sh. Pas 13-4/4 No. 806-4 07/02 = 195-1 SZ0E6OPOLL+ *OLT VOIMAY THOVLIH-BO43 60:02 00-11-Cen