TX2-12V NAIS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

2 A CAPACITY RELAY

VOLTAGE & HIGH BREAKDOWN VOLTAGE TESTING mm inch 8.2 .323 7.4 .29115 .591 8.4 .331 7.4 .29115 .591

FEATURES

  • Breakdown voltage between contacts and coil: 2,000 V
  • Surge withstand between contacts and coil: 2,500 V
  • High contact capacity: 2 A 30 V DC
  • Surface-mount type available SPECIFICATIONS Contact Notes: 1This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the ac- tual load. (SX relays are available for low level load switching [10 µA 1 mV DC – 10 mA 10 V DC]) 2The upper limit for the ambient temperature is the maximum temperature that can satisfy the coil temperature rise. Under the packing condition, allowable tem- perature range is from –40 to +70°C –40°C to +158°F . Remarks * Specifications will vary with foreign standards certification ratings. Measurement at same location as "Initial breakdown voltage" section. By resistive method, nominal voltage applied to the coil; contact carrying current: 2 A. Nominal voltage applied to the coil, excluding contact bounce time. Nominal voltage applied to the coil, excluding contact bounce time without diode. Half-wave pulse of sine wave: 6 ms; detection time: 10 µ Half-wave pulse of sine wave: 6 ms. Detection time: 10 µ Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT. Characteristics Arrangement 2 Form C Initial contact resistance, max. (By voltage drop 6 V DC 1 A) 100 m Ω Contact material Gold-clad silver alloy Rating Nominal switching capacity (resistive load) 2 A 30 V DC Max. switching power (resistive load) 60 W Max. switching voltage 220 V DC Max. switching current 2 A Min. switching capacity 1 10 µ A 10 mV DC Nominal operating power Single side stable 140 mW (1.5 to 24 V DC) 270 mW (48 V DC) 1 coil latching 100 mW (1.5 to 24 V DC) 2 coil latching 200 mW (1.5 to 24 V DC) Expected life (min. operations) Mechanical (at 180 cpm) 10 Electrical (at 20 cpm)

2 A 30 V DC

1 A 30 V DC

Initial insulation resistance* Min. 1,000 M Ω (at 500 V DC) Initial breakdown voltage Between open con- tacts 1,000 Vrms for 1 min. (Detection current: 10 mA) Between contact sets 1,000 Vrms for 1 min. (Detection current: 10 mA) Between contact and coil 2,000 Vrms for 1 min. (Detection current: 10 mA) Initial surge voltage Between open contacts (10 160 µ 1,500 V (FCC Part 68) Between contacts and coil (2 µ s) 2,500 V (Telcordia) Temperature rise* (at 20 C) Max. 50 C Operate time [Set time]* (at 20 C) Max. 4 ms (Approx. 2 ms) [Max. 4 ms (Approx. 2 ms)] Release time [Reset time]* (at Max. 4 ms (Approx. 1 ms) [Max. 4 ms (Approx. 2 ms)] Shock resistance Functional* Min. 750 m/s {75 G} Destructive* Min. 1,000 m/s {100 G} Vibration resistance Functional* 196 m/s {20 G}, 10 to 55 Hz at double amplitude of 3.3 mm Destructive 294 m/s {30G}, 10 to 55 Hz at double amplitude of 5 mm Conditions for oper- ation, transport and storage* (Not freezing and condensing at low temperature) Ambient tem- perature –40 C to +85 C (up to 24 V coil) –40 F to +185 F (up to 24 V coil) –40 C to +70 C (48 V coil) –40 F to +158 F (48 V coil) Humidity 5 to 85% R.H. Unit weight Approx. 2 g . 071 oz All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

TYPES AND COIL DATA (at 20 C 68 1) Standard PC board terminal type and self-clinching terminal type 1. Single side stable 2. 1 Coil latching 3. 2 Coil latching Part No. Nominal voltage, V DC Pick-up voltage, V DC (max.) Drop-out voltage, V DC (min.) Nominal operating current, mA ( 10%) Coil resistance, Ω 10%) Nominal operating power, mW Max. allowable voltage, V DC Standard PC board terminal Self-clinching terminal TX2-5 V TX2-H-5 V 5 3.75 0.5 28.1 178 140 7.5 TX2-6 V TX2-H-6 V 6 4.5 0.6 23.3 257 140 9 TX2-9 V TX2-H-9 V 9 6.75 0.9 15.5 579 140 13.5 TX2-12 V TX2-H-12 V 12 9 1.2 11.7 1,028 140 18 TX2-24 V TX2-H-24 V 24 18 2.4 5.8 4,114 140 36 TX2-48 V TX2-H-48 V 48 36 4.8 5.6 8,533 270 57.6 Part No. Nominal voltage, V DC Set voltage, V DC (max.) Reset voltage, V DC (max.) Nominal operating current, mA ( 10%) Coil resistance, Ω 10%) Nominal operating power, mW Max. allowable voltage, V DC Standard PC board terminal Self-clinching terminal TX2-L-3 V TX2-L-H-3 V 3 2.25 2.25 33.3 90 100 4.5 TX2-L-5 V TX2-L-H-5 V 5 3.75 3.75 20 250 100 7.5 TX2-L-6 V TX2-L-H-6 V 6 4.5 4.5 16.7 360 100 9 TX2-L-9 V TX2-L-H-9 V 9 6.75 6.75 11.1 810 100 13.5 TX2-L-12 V TX2-L-H-12 V 12 9 9 8.3 1,440 100 18 TX2-L-24 V TX2-L-H-24 V 24 18 18 4.2 5,760 100 36 Part No. Nominal voltage, V DC Set voltage, V DC (max.) Reset voltage, V DC (max.) Nominal operating current, mA ( 10%) Coil resistance, Ω 10%) Nominal operating power, mW Max. allowable voltage, V DC Standard PC board terminal Self-clinching terminal TX2-L2-3 V TX2-L2-H-3 V 3 2.25 2.25 66.7 45 200 4.5 TX2-L2-5 V TX2-L2-H-5 V 5 3.75 3.75 40 125 200 7.5 TX2-L2-6 V TX2-L2-H-6 V 6 4.5 4.5 33.3 180 200 9 TX2-L2-9 V TX2-L2-H-9 V 9 6.75 6.75 22.2 405 200 13.5 TX2-L2-12 V TX2-L2-H-12 V 12 9 9 16.7 720 200 18 TX2-L2-24 V TX2-L2-H-24 V 24 18 18 8.3 2,880 200 36 Notes: 1. Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. 3. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.

ORDERING INFORMATION

2S A L 3 V HZEx. TX Contact arrangement Surface-mount availability Operating function Coil voltage (DC) Nil: Standard PC board terminal type or Nil: self-clinching terminal type SA: Standard surface-mount terminal type SL: High connection reliability surface-mount SL: terminal type SS: Space saving surface-mount terminal type 2: 2 Form C Nil: Single side Nil: stable L: 1 coil latching L2: 2 coil latching Terminal shape Nil: Standard PC board terminal or surface-mount terminal H: Self-clinching terminal 1.5, 3, 4.5, 5, 6, 9, 12, 24, 48* V Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number suffix “-X” is needed when ordering. (ex.) TX2SA-3 V-X 2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay. Packing style Nil: Tube packing Z: Tape and reel packing(picked from the 8/9/10/12 -pin side *48 V coil type: Single side stable only ––– – All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

2) Surface-mount terminal type 1. Single side stable 2. 1 coil latching 3. 2 coil latching : For each surface-mounted terminal variation, input the following letter. SA type: A , SL type: L , SS type: S Notes: 1. Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. 3. Tape and reel packing is also available for surface-mount type by request. Part number suffix "-X" or "-Z" is needed when ordering. In this case, "X" or "Z" are not marked on the relay. Quantity in tape and reel: 500 pcs. (ex.) • TX2SA-3V-X

  • TX2SA-L-3V-Z Picked from the 1/3/4/5-pin side Picked from the 8/9/10/12-pin side 4. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay. Part No. Nominal voltage, V DC Pick-up voltage, V DC (max.) Drop-out voltage, V DC (min.) Nominal operating current, mA ( 10%) Coil resistance, Ω 10%) Nominal operating power, mW Max. allowable voltage, V DC TX2S TX2S TX2S TX2S -5 V 5 3.75 0.5 28.1 178 140 7.5 TX2S -6 V 6 4.5 0.6 23.3 257 140 9 TX2S -9 V 9 6.75 0.9 15.5 579 140 13.5 TX2S -12 V 12 9 1.2 11.7 1,028 140 18 TX2S -24 V 24 18 2.4 5.8 4,114 140 36 TX2S -48 V 48 36 4.8 5.6 8,533 270 57.6 Part No. Nominal voltage, V DC Set voltage, V DC (max.) Reset voltage, V DC (max.) Nominal operating current, mA ( 10%) Coil resistance, Ω 10%) Nominal operating power, mW Max. allowable voltage, V DC TX2S TX2S -L-3 V 3 2.25 2.25 33.3 90 100 4.5 TX2S TX2S -L-5 V 5 3.75 3.75 20 250 100 7.5 TX2S -L-6 V 6 4.5 4.5 16.7 360 100 9 TX2S -L-9 V 9 6.75 6.75 11.1 810 100 13.5 TX2S -L-12 V 12 9 9 8.3 1,440 100 18 TX2S -L-24 V 24 18 18 4.2 5,760 100 36 Part No. Nominal voltage, V DC Set voltage, V DC (max.) Reset voltage, V DC (max.) Nominal operating current, mA ( 10%) Coil resistance, Ω 10%) Nominal operating power, mW Max. allowable voltage, V DC TX2S TX2S -L2-3 V 3 2.25 2.25 66.7 45 200 4.5 TX2S TX2S -L2-5 V 5 3.75 3.75 40 125 200 7.5 TX2S -L2-6 V 6 4.5 4.5 33.3 180 200 9 TX2S -L2-9 V 9 6.75 6.75 22.2 405 200 13.5 TX2S -L2-12 V 12 9 9 16.7 720 200 18 TX2S -L2-24 V 24 18 18 8.3 2,880 200 36 All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
  1. Single side stable and 1 coil latching type Standard PC board terminal 0.5 .020 1.15 .045 5.08 .200 2.54 .100 8.2 .323 3.5 .138 0.65 .026 7.4 .291 5.08 .200 0.25 .010 .591 Self clinching terminal General tolerance: 0.3 .012 0.5 .020 1.15 .045 5.08 .200 2.54 .100 8.2 .323 3.5 .138 0.65 .026 7.4 .291 5.08 .200 0.25 .010 .591 PC board pattern (Copper-side view) Tolerance: 0.1 .004 5.08 .200 2.54 .100 8-1.0 dia 8-.039 dia 10.16 .400 Schematic (Bottom view) Single side stable (Deenergized condition) 1 coil latching (Reset condition) *Orientation stripe located on top of relay. Direction indication* 12 10 9 8 1 3 4 5 Direction indication* 12 10 9 8 1 3 4 5 Surface-mount terminal SA type 0.5 .020 5.08 .200 2.54 .100 8.2 .323 8.4 .331 0.65 .026 7.4 .291 5.08 .200 0.25 .010 .591 9.4±0.5 .370±.020 SL type 0.5 .020 5.08 .200 2.54 .100 8.2 .323 0.65 .026 7.4 .291 5.08 .200 0.25 .010 .591 9.4±0.5 .370±.020 Max. 10.0 .390 SS type General tolerance: ±0.3 ±.012 0.5 .020 5.08 .200 2.54 .100 8.2 .323 0.65 .026 7.4 .291 5.08 .200 0.25 .010 .591 7.4±0.5 .291±.020 Max. 10.0 .390 Suggested mounting pad (Top view) Tolerance: ±0.1 ±.004 0.3 .012 3.16 .124 .039 2.54 .100 5.08 .200 1.6 .0.63 7.24 .285 .591 For glue-pad 3.16 .124 .039 2.54 .100 5.08 .200 7.24 .285 2.16 .085 .039 2.54 .100 5.08 .200 6.24 .246 Schematic (Top view) Single side stable (Deenergized condition) 1 coil latching (Reset condition) Direction indication 12 10 9 8 1 3 4 5 Direction indication 12 10 9 8 1 3 4 5 mm inch 2. Coil latching type Standard PC board terminal 0.5 .020 1.15 .045 5.08 .200 2.54 .100 8.2 .323 3.5 .138 0.65 .026 7.4 .291 5.08 .200 0.25 .010 .591 Self clinching terminal General tolerance: ±0.3 ±.012 0.5 .020 1.15 .045 5.08 .200 2.54 .100 8.2 .323 3.5 .138 0.65 .026 7.4 .291 5.08 .200 0.25 .010 .591 PC board pattern (Copper side view) Tolerance: ±0.1 ±.004 5.08 .200 2.54 .100 10-1.0 dia 10-.039 dia 12.7 .500 Schematic (Bottom view) 2 coil latching (Reset condition) Direction indication* 12 10 9 8 7 1 3 4 5 6 –Surface-mount terminal SA type 0.5 .020 5.08 .200 2.54 .100 8.2 .323 8.4 .331 0.65 .026 7.4 .291 5.08 .200 0.25 .010 .591 9.4±0.5 .370±.020 SL type 0.5 .020 5.08 .200 2.54 .100 8.2 .323 0.65 .026 7.4 .291 5.08 .200 0.25 .010 .591 9.4±0.5 .370±.020 Max. 10.0 .390 SS type General tolerance: ±0.3 ±.012 0.5 .020 5.08 .200 2.54 .100 8.2 .323 0.65 .026 7.4 .291 5.08 .200 0.25 .010 .591 7.4±0.5 .291±.020 Max. 10.0 .390 Suggested mounting pad (Top view) Tolerance: ±0.1 ±.004 0.3 .012 3.16 .124 .039 2.54 .100 5.08 .200 1.6 .0.63 7.24 .285 .591 For glue-pad 3.16 .124 .039 2.54 .100 5.08 .200 7.24 .285 2.16 .085 .039 2.54 .100 5.08 .200 6.24 .285 Schematic (Top view) 2 coil latching (Reset condition) Direction indication 12 10 9 8 7 1 3 4 5 6 All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
  1. Maximum switching capacity 2. Life curve 3. Mechanical life Tested sample: TX2-5V, 10 pcs. Operating frequency: 180 cpm 0.2 0.3 0.4 0.5 1.0 2.0 3.0 20 30 50 100 200 300 DC resistive load Contact voltage, V Switching current, A 1.0 2.0 100 Switching current, A No. of operations ×10 30V DC resistive load 100 10,0001,00010 Max. Max. Min. Min. 100 No. of operations, ×10 Ratio against the rated voltage, %V Pick-up voltage Drop-out voltage 4. Electrical life Tested sample: TX2-5V, 6 pcs. Operating frequency: 20 cpm Change of pick-up and drop-out voltage Change of contact resistance 5-(1). Coil temperature rise Tested sample: TX2-5V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25°C 77°F, 85°C 185°F 101 Max. Min. Min. 100 23456789 Max. No. of operations, ×10 Ratio against the rated voltage, %V Pick-up voltage Drop-out voltage 101 Max. Min. 100 23456789 No. of operations, ×10 Contact resistance, mΩ 100 120 150 110 130 140 +25°C +77°F +85°C +185°F No. of operate, ×10 Temperature rise, °C 5-(2). Coil temperature rise Tested sample: TX2-48V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25°C 77°F, 70°C 158°F 6-(1). Operate and release time (with diode) Tested sample: TX2-5V, 10 pcs. 6-(2). Operate and release time (without diode) 100 120 150 110 130 140 +25°C +77°F +70°C +158°F No. of operations, ×10 Temperature rise, °C 70 80 100 120 90 110 Max. Max. Min. Min. Coil applied voltage, %V Operate and release time, ms Operate time Release time 70 80 100 120 90 110 Max. Max. Min. Min. Coil applied voltage, %V Operate and release time, ms Operate time Release time 7. Distribution of pick-up and drop-out voltage Tested sample: TX2-5V, 50 pcs. 8. Distribution of set and reset voltage Tested sample: TX2-L2-12V, 30 pcs. 9. Ambient temperature characteristics Tested sample: TX2-5V, 5 pcs. /;/;/;/; /;/;/;/; /;/;/;/; /;/;/;/; /;/;/; /;/;/; /;/;/;/; /;/;/;/; /;/; 01 0 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V Quantity Drop-out voltage Pick-up voltage 01 0 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V Quantity Set voltage Reset voltage –40 –20 –40 –20 02 0 40 60 80 x x Ambient temperature, °C Rate of change, % Drop-out voltage Pick-up voltage All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
  1. Distribution of contact resistance Tested sample: TX2-5V, 30 pcs. (30 × 4 contacts) 11-(1). High frequency characteristics Tested sample: TX2-12V, 2 pcs. Isolation characteristics 11-(2). High frequency characteristics Tested sample: TX2-12V, 2 pcs. Insertion loss characteristics /;/; /;/;/;/; /;/;/;/; /;/;/;/; /;/;/; /;/; /;/; /;/;/; /;/;/;/; /;/;/;/; /;/;/; 0 20 30 40 50 13 4 5 12 10 9 8 (BOTTOM VIEW) Contact resistance, mΩ Quantity Terminal Nos. 4-5, 8-9 Terminal Nos. 3-4, 9-10 10 100 1,000 100 Frequency, MHz Isolation, dB 0.6 10 100 1,000 0.2 0.4 1.0 0.8 Frequency, MHz Insertion loss, dB 12-(1). Malfunctional shock (single side stable) Tested sample: TX2-5V, 6 pcs Y XZ Z' X' Y Z' Z XX' 1000m/s 1000m/s2 1000m/s2 1000m/s2 1000m/s2 1000m/s2 Deenergized condition Energized condition 12-(2). Malfunctional shock (latching) Tested sample: TX2-L2-12V, 6 pcs. Y XZ Z' X' Y Z' Z XX' 1000m/s 1000m/s2 1000m/s2 1000m/s2 1000m/s2 1000m/s2 Reset state Set state 13-(1). Influence of adjacent mounting 13-(2). In fluence of adjacent mounting 13-(3). In fluence of adjacent mounting ON ON OFF OFF .394 .236 .079 .157 .315 OFF ON Pick-up voltage Drop-out voltage Inter-relay distance , mm inch Rate of change, % Rate of change, % ON ON ON OFF OFF OFF .394 .236 .079 .157 .315 Pick-up voltage Drop-out voltage Inter-relay distance , mm inch Rate of change, % Rate of change, % .394 .236 ON OFF .079 .157 .315 Pick-up voltage Drop-out voltage Inter-relay distance , mm inch Rate of change, % Rate of change, % ON ON OFF OFF ON OFF 14. Pulse dialing test Tested sample: TX2-5V, 6 pcs. (35 mA 48 V DC wire spring relay load) Circuit Change of pick-up and drop-out voltage Change of contact resistance 48V DC 458 Ω 0.08 µF 0.08 µF 458 Ω Wire spring relay 20 50 30 10 Max. Max. Min. Min. 100 No. of operation, ×10 Ratio against the rated voltage, %V Pick-up voltage Drop-out voltage Max. Min. 100 10 20 30 40 No. of operations, ×10 Contact resistance, mΩ Note: Data of surface-mount type are the same as those of PC board terminal type. All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
  1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. 2) Tape and reel packing (surface-mount terminal type) (1) Tape dimensions (i) SA type mm inch (ii) SL type mm inch (iii) SS type mm inch (2) Dimensions of plastic reel mm inch Orientation (indicates PIN No.1)stripe Stopper (gray) Stopper (green) TX/TX-D/TX-S -SMD relays Tape coming out direction 16.0 .630 10.0 .394 4.0 .157 24.0±0.3 .945±.012 ±0.29.2 ±.008.362 0.4 .016 C B A D Relay polarity bar (Z type) 2.0 .079 11.5 .453 1.75 .069 15.5 .610 .059 dia. +.004 1.5 dia.+0.1 10.0 .394 16.0TX/TX-D/TX-S -SMD relays Tape coming out direction .630 4.0 .157 24.0±0.3 .945±.012 ±0.210.8 ±.008.425 0.4 .016 Relay polarity bar (Z type) 2.0 .079 11.5 .453 15.5 .610 1.75 .069.059 dia.+.004 1.5 dia.+0.1 8.0 .315 16.0TX/TX-D/TX-S -SMD relays Tape coming out direction .630 4.0 .157 24.0±0.3 .945±.012 ±0.210.8 ±.008.425 0.4 .016 Relay polarity bar (Z type) 2.0 .079 11.5 .453 15.5 .610 1.75 .069.059 dia.+.004 1.5 dia.+0.1 2.2 dia. .087 dia. ±.024 .827 ±0.6 dia. dia. ±.020 .512 ±0.5 dia. dia. ±0.2 2.0 ±.008 .079 024.4 +.079 .961 .079±.020 2.0±0.5 100 370 dia. dia. ±.039 3.937 14.567 dia. dia. ±.079 For Cautions for Use, see Relay Technical Information. All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.